MB-22® E-Z Polishing Powder for Marble and Terrazzo is a superior wet polishing powder that delivers a high shine and dazzling gleam.

Formulated for terrazzo and calcite-based stones, this polishing powder will not etch surfaces with splatter.

8 oz size. For bigger sizes, call 888-509-5831 to order.

The following directions are an average recommendation. Different stones may require different quantities of product along with various techniques. If you are in doubt, don't hesitate to call 888-509-5831 for help using this product.

Directions for use: Always make sure to mask off and protect surfaces that could be splattered by product. Wear safety glasses and gloves. Make sure the surface is free of any coatings, waxes, sealers, grease, and/or soil. For best results, use a right-angle grinder/polisher (variable speed) with a hogs hair pad. Use about 1/3 oz per 2 to 3 square feet (remember the amounts will vary) of product and enough water to create a wet paste, but thick enough not to make a splattering mess. As you work the product, more water will need to be added to maintain a wet paste. Start by placing the product in the center of your target. Add the water now. Place your machine and hogs hair pad directly on top of it. Starting slowly, spread the product out over the area. The use of pressure will vary depending on the stone, but generally you can apply an even light pressure. Run the machine on a slow setting for about a minute per square foot.

Tip: Working with this polish, you will find you are able to get a good result close to edges, sinks, faucets, tub surrounds and tight spaces. A white pad cut 1/2 inch over the diameter of the pad driver protects the fixture or surface you are polishing against.

All powders are packed by weight and not by volume.