Universal polishing cream for natural stone

  

UNIVERSAL GLOSSY is a water-based polishing cream. Thanks to its formula, the product can polish Marble and Granite as if they were the same material, with an even shine throughout the surface.

UNIVERSAL GLOSSY is ideal for polishing mixed floorings, made up of Marble, Limestone, Travertine, Granite, Quartz, and Ceramic.

Honing and polishing UNIVERSAL GLOSSY Universal polishing cream for all natural stone like marble, granite and agglomerates. UNIVERSAL GLOSSY is a water-based cream to polish surfaces. This advanced product, thanks to its special formula, can polish Marbles and Granites as if they were the same material, without any difference in brightness or without incurring in different products to polish the same floor. UNIVERSAL GLOSSY is ideal both to polish mixed floorings, made up of Marbles, Limestone, Travertine, Granite, Quartz and even Ceramic and to polish floors made up of just one material. In fact, the product is easy and fast to use, it does not leave any defect and a high bright vitreous effect with an excellent resistance to foot traffic. The product is suitable for the maintenance of big surfaces, allowing a light but much effective maintenance. The product does not require water for application, enhances brightness and restores the original color of material, should it be partially lost. CHARACTERISTICS AND BENEFITS Marked brightness High hardness Resistance to foot traffic Fast result Closure against soiling agents USES For interiors and exteriors: Marbles, Limestone, Travertine, Granites, Quartz and Ceramics. COVERAGE 50/70 m2 /lt APPLICATION EQUIPMENT Single disc machine, which has a power of 2 HP (2.2 HP is preferable); Manual rotary brush. Faber Chimica is able to supply the WARRIOR Single disc machine, which has a power of 2.2 HP, and is optimised for the correct application of any product. APPLICATION Test on a small area before proceeding, so to ensure product suitability and final result. Proceed by small surface portions of about 1-2 sq.mt. each. Put 1-2 teaspoons of product on the area to treat and make a dry-buffing, making concentric movement with a floor machine and white pad. Continue until dry, by prolonging the movement with the machine to remove possible residues. In order to obtain a higher brightness or superficial closing, repeat application. The product does not give any superposition defect; therefore, once obtained the maximum brightness, no defect can be remarked between two areas polished separately. After polishing the surface, rinse with water and vacuum up the residues on the surface. FABER CHIMICA SRL – VIA G.CERESANI, 10 – LOC.CAMPO D’OLMO – 60044 – FABRIANO (AN) – ITALY Phone: +39 0732 627178 | Fax: +39 0732 22935 | Email: info@faberchimica.com Pag. 2 di 2 Honing and polishing UNIVERSAL GLOSSY Universal polishing cream EQUIPMENT CLEANING At the end of application, the equipment used can be washed using water. SAFETY When applying the product, always use suitable personal protective equipment and follow the instructions on the product safety data sheet with care. PHYSICAL AND TECHNICAL INFORMATION Aspect: Cram Color: White Odour Odourless pH: 2,7 ± 0,5 STORAGE Keep the container tightly closed and store in a cool, dry place. SHELF LIFE 24 months in the original, sealed packaging, stored in a cool, dry place. PACKAGING - 5 kg containers – 4 per box HAZARD IDENTIFICATION H302 Harmful if swallowed H373 May cause damage to organs through prolonged or repeated exposure P260 Do not breathe dust/fume/gas/mist/vapours/spray. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling P270 Do not eat, drink or smoke when using this product P271 Use only outdoors or in a well-ventilated area P280 Wear protective gloves/protective clothing/eye protection/face protection Version 1.0 – 16/01/2017 This technical data sheet supersedes all previous versions. Always refer to the latest version of the data sheet, available on www.fabersurfacecare.com site. Faber Chimica reserves the right to update and / or modify the data and information contained in the data sheet. The information in this data sheet is based on our wide experience in technical and operational research. In any case you should always make a preliminary test to verify the suitability of the product for the intended use and the type of material on which it will be applied. The information and the suggestions can't be construed as a commitment or result in our responsibility as the conditions and method of use of the product cannot be controlled by us. Therefore Faber Chimica Srl disclaims any liability with regard to the use of such data and suggestions.