Created with Sketch.

Lithium Silicate Diamond Glass NANO Densifier

$198.00 $119.00
(You save $79.00)
(No reviews yet) Write a Review
Calculated at Checkout
Lithium Silicate Diamond Glass NANO Densifier

Lithium Silicate Densifier for Concrete

 35 Series - Densifier/Hardener, Sealer and Cleaner/Maintainer






1 gallon

Diamond Glass NANO Densifier (concentrate = 5 gallons)



5 gallon

Diamond Glass NANO Densifier (concentrate = 25 gallons)


  •  Lithium Silicate Diamond Glass NANO Densifier is an eco-friendly, impregnating densifier specifically designed to be used in the polishing process of natural and cementitious surfaces. It is a concentrated formula and dilutes with water. It can be used in both interior and exterior applications. It will penetrate and protect the surface without affecting its natural appearance. The polishing application increases the abrasion resistance while increasing the resistance to freeze/thaw scaling, efflorescence, spalling, staining, mildew and fungi, and water intrusion. The enhanced penetration of the NANO particles with the NANO glass beads provides extended life, higher abrasion resistance with lower maintenance requirements, and reduced cleaning costs and repairs. It forms a dense, breathable, surface that will not flake or peel. The natural reaction of the lithium silicate with the lime/calcium of the Portland cement closes off most of the fine capillaries in the concrete creating a highly dense, hard surface and greater light reflection.


    Lithium Silicate Diamond Glass NANO Densifier can be used over concrete, stucco, granite, natural stone, limestone, terrazzo and any material made with Portland cement as a binder. Typical applications include unsealed concrete, polished and/or decorative concrete or stone flooring, countertops or any porous surface, natural stone or cementitious product, requiring added protection or reflectivity.

    Surface Preparation

    Ensure the substrate is dry and free of all foreign materials such as curing agents, laitance, glaze, efflorescence, dust, dirt, oil, grease, curing compounds, etc. that may impair or prevent penetration or bonding.


    Universal Polishing Systems Lithium Silicate Diamond Glass NANO Densifier may be applied by pump up sprayer and microfiber pad, roller or brush.

    NOTE: Be sure to mix, stir or shake thoroughly before applying. Mix the product with 4 parts water to 1 part Lithium Silicate Diamond Glass NANO Densifier (one gallon concentrate container makes 5 gallons of ready to use densifier). Surface should be evenly saturated. Do not allow liquid to puddle. Depending on surface porosity, climate and temperature, dry time can be as much as 1 hour.

    Once treated, the surface can take foot traffic after 1 hour. The surface will continue to harden over time, reaching its maximum durability and resistance over approximately 7 days.

    Use water to clean tools or equipment, no special or hazardous disposal methods are necessary.


    Do not apply when temperatures are below 40º F or above 100º F. In hot, dry, or windy conditions, you may consider lightly dampening the surface.

    Technical Data

    Coverage can vary from surface to surface depending on roughness, porosity and density of the medium being applied. Application technique can also vary the coverage. On smooth, dense surfaces, the coverage should generally range from 400 to 800 square feet per gallon when properly diluted.


    • Dry Time: 1 to 2 Hour 
    • Color: Clear
    • Freeze Point: 32˚F, do not allow to freeze 
    • V.O.C.: 0 lbs per gallon
    • Shelf Life: 1 year in sealed container
    • Flash Point: N/A
    • Solids: Approx. 18%