An acetoxy cure, high performance, mold-proof silicone sealant designed for gap filling and sealing in a wide range of sanitary applications.

Advantages:

• 100% silicone, does not contain any solvent,

• Prevents mold formation on its surface,

• Stays bright and clean thanks to its

  outstanding mildew and & fungus

  resistance,

• Low modulus, high elasticity,

• Excellent resistance to direct sunlight,

  rain, snow and ozone,

• Primerless adhesion to numerous porous

  and non-porous substrates,

• Resistant to temperature extremes (-40°F

  to +356°F),

• Does not crack or discolor

• Withstands detergents, cleaning agents

  and chemicals,

• Fast curing,

• No shrinkage,

• Acetoxy curing system.

  Usage Areas:

• Sanitary joints: Sealing applications in kitchens and bathrooms.

• Sealing of connection joints,

• Weather seal application,

• Glazing works,

How to use:

Ensure that surfaces to be sealed are clean, dry and grease free.

 The application temperature must be between +41°F and +104°F.

In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 0,2x0,2 in, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a backup material.

After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish.

Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically.

 0,2in. joint depth is recommended for joint widths between 0,2in to 0,5in.

Consumption (approx.):

Joint Width

0,2in 0,4in 0,5in

Efficiency 26ft 16ft 13ft /10,1 oz