Small Concrete / Asphalt Blades [Up to 10"]

Small Concrete / Asphalt Blades [Up to 10"]

 Concrete is a material made of a mixture of cement, sand, stone, and water that hardens to a stone like mass, the composition of concrete can vary depending on cure time and hardening. With these varying conditions you will need a versatile blade that contain a range of hard bonds and soft bond segments. The Diamond Tool Store offers a variety of bonds and diamond concentration segments on our blades to make sure you achieve the cleanest cuts on what ever concrete surface you are cutting. Ideal for Grinders and Hand Held Saws our small concrete and asphalt blades range from 4” - 10” and beyond for special order blades. 

  • On Sale
    wet/dry
    Saw Blade for Asphalt - Supreme
    Choose Options

    Diamond Tool Store

    Saw Blade for Asphalt - Supreme

    MSRP: $24.29
    Now: $17.00
    Was: $24.29
    Saw Blade for Asphalt - Supreme DRY / WET Application : Asphalt, Green Concrete Equipment : Angle Grinder, Circular Saw, High Speed Saw, Table Saw, Low HP Walk Behind Wedge segment, Key slot Available Size: 4", 4.5", 5", 6", 7", 8", 9", 10", 12",...
    MSRP: $24.29
    Now: $17.00
    Was: $24.29
    Choose Options
  • On Sale
    wet/dry
    Zenesis Early Entry Blade for Green Concrete - Purple
    Choose Options

    Zenesis

    Zenesis Early Entry Blade for Green Concrete - Purple

    MSRP: $77.71
    Now: $54.40
    Was: $77.71
    Zenesis Diamond Blade for dry or wet cutting of green concrete Equipment : Soft-Cut* Saw Application : Very Hard Aggregate, Flint, Chert DRY / WET Skid plated shield included, ZENESIS Patterned Diamond, Purple * Soff-Cut is a...
    MSRP: $77.71
    Now: $54.40
    Was: $77.71
    Choose Options
  • wet/dry
    Tornado Turbo Blade for Asphalt Multi Shot | Tornado Turbo Blade for Asphalt
    Choose Options

    Diamond Tool Store

    Tornado Turbo Blade for Asphalt

    MSRP: $38.29
    $26.80
    Tornado Turbo Blade for Asphalt DRY / WET Application : Asphalt, Green Concrete Equipment : Angle Grinder, Circular Saw, High Speed Saw, Table Saw, Low HP Walk Behind Segment Height: 9mm Item...
    MSRP: $38.29
    $26.80
    Choose Options
  • 4 Inch Concrete Cutting Blade
    Add to Cart

    Diamond Tool Store

    4 Inch Concrete Cutting Blade

    MSRP: $19.00
    $9.00
    Sale on 4 Inch Diamond Blade for cutting concrete Maxima 4 Inch Diamond Blade is designed for cutting concrete and similar types of material.   Segmented Made in Korea  
    MSRP: $19.00
    $9.00
    Add to Cart
  • Overview | Vacuum Bonded | Blades
    Choose Options

    A2Z Vacuum Bonded Blades

    $115.00
    Multipurpose Cutting, including metal.  Vacuum bonded technology-diamonds are adhered to the core landing Great for rescue and emergency situations Cuts a wide range of materials Holes in the core landing help with cooling while cutting metal...
    $115.00
    Choose Options
  • On Sale
    wet/dry
    All Cut Rescue Blade - Premium
    Choose Options

    Diamond Tool Store

    All Cut Rescue Blade - Premium

    MSRP: $38.29
    Now: $26.80
    Was: $38.29
    All Cut Rescue Blade - Premium DRY / WET  Application : PVC Pipe, Steel, Cast Iron, Wood, Ductile Iron Pipe, Reinforced Concrete Equipment : Angle Grinder, Circular Saw, High Speed Saw, Table Saw, Low HP Walk Behind Brazed segment, Cooling...
    MSRP: $38.29
    Now: $26.80
    Was: $38.29
    Choose Options
  • Alpha Katana Diamond Blade Action Shot - Alpha Katana Diamond Blade
    Choose Options

    Alpha Tools

    Alpha Katana Diamond Blade

    $40.51
    Katana - The Ultimate Dry Blade for all Tiles Alpha Professional Tools® is excited to introduce the Alpha® Katana. This blade is the ultimate dry cutting diamond blade for the professional tile contractor. Engineered to be the only blade...
    $40.51
    Choose Options
  • Alpha Ultracut GPM Series Blade Action Shot - Alpha Ultracut GPM Series Blade
    Choose Options

    Alpha Tools

    Alpha Ultracut GPM Series Blade

    $26.50
    Brazed Diamond Blade Cuts Angle Iron, Pipe, Electrical Conduit, Re-Bar, Metal Stud, Structural Metal, Sheet Metal, Grid, and Stainless Steel, Wood, Plastics, Composite Materials, Masonry and Concrete  The Alpha® Ultracut GPM Series is made for...
    $26.50
    Choose Options
  • Asphalt Cutters Asphalt Cutters by itself

    Arrow Material Handling

    Asphalt Cutters

    Asphalt Cutters for easy clamping with four-point contact Call for details, sizes, and options CTI Asphalt Cutters mount directly to your bucket and are ready to use in seconds. The built-in handle allowsyou to tighten the clamp by hand, eliminating...
  • BD-305 Premium Thin-Rim Blades for Agate
    Choose Options

    MK Diamond

    BD-305 Premium Thin-Rim Blades for Agate

    $79.00
    Premium Thin-Rim Blades for Agate The BD-305 Agate Kutter Diamond Blade has been designed to cut a variety of hard lapidary materials on high speed water cooled tile and brick saws with minimal chipping. These thin-rim blades guarantee straight cuts in...
    $79.00
    Choose Options
  • Bevel Blades - H.D.
    Choose Options

    Diamond Products

    Bevel Blades - H.D.

    $557.00
    Bevel wet blades are used in pairs with each blade having a 45 degree angle  Blades must be ordered in pairs  Bevel blades can be redressed to maintain chamfer for angle  Diamond depth varies based on quality grade, thickness and...
    $557.00
    Choose Options
  • Front View of Clipper Aero-Jet
    Choose Options

    Norton

    Clipper Aero-Jet

    $75.62
    Very Fast, Smooth Cutting. The .590" High Segment Rim adds extremely long life whether cutting wet or dry in hard materials. Exclusive arrow shape protection inserts for precision straight cuts. A ventilated waved steel core for better cooling and...
    $75.62
    Choose Options
  • wet/dry
    Continuous Turbo Rim Crack Chaser
    Add to Cart

    Diamond Tool Store

    Continuous Turbo Rim Crack Chaser

    MSRP: $102.85
    $72.85
    4 Inch Continuous Turbo Rim Crack Chaser Premium DRY / WET Application : Hard Concrete, Asphalt Equipment : Angle Grinder Model Description Seg. Height DTS-SHCT30P0437H 4 X .375 X 5/8-11 12.7MM (.500")    
    MSRP: $102.85
    $72.85
    Add to Cart
  • wet/dry
    Crack Chaser Blade
    Choose Options

    Diamond Tool Store

    Crack Chaser Blade

    MSRP: $87.42
    $61.22
    Crack Chaser Diamond Blade - Premium   DRY / WET Application : Concrete, Asphalt Equipment : Angle Grinder, Walk Behind Saw   Features: This blade is perfect for chasing cracks on concrete slabs, especially on countertops.  Comes...
    MSRP: $87.42
    $61.22
    Choose Options
  • Overview | Core Cut | Tuck Point | Delux Cut
    Choose Options

    Diamond Products

    Delux Cut Tuck Point Blade

    $52.00
    Delux-cut Segmented Tuck Point Diamond Blades Basic quality diamond and economical cutting value   Diamond Depth: .250” (6mm) Segment Height: .350” (9mm)  
    $52.00
    Choose Options
  • Overview | Crack Blades | Delux Cut
    Choose Options

    Diamond Products

    Delux Cut V Crack Blades

    $217.00
    Delux-Cut V-Crack Tuck Point Diamond Blades Basic quality diamond and economical cutting value     Delux-Cut V-Crack Tuck PointDiamond Blades Basic quality diamond and economical cutting value Cleans, routs and repairs cracks in...
    $217.00
    Choose Options
  • Delux-Cut High Speed Diamond Blades - H8D
    Choose Options

    Diamond Products

    Delux-Cut High Speed Diamond Blades - H10D

    $106.00
    Basic quality diamond and economical cutting value Basic quality diamond and economical cutting value Sintered segment Diamond depth of .440” (11mm) Segment height of .540” (14mm)  Specifications: H8D - General...
    $106.00
    Choose Options
  • Delux-Cut High Speed Diamond Blades - H8D
    Choose Options

    Diamond Products

    Delux-Cut High Speed Diamond Blades - H8D

    $93.00
    Basic quality diamond and economical cutting value Basic quality diamond and economical cutting value Sintered segment Diamond depth of .440” (11mm) Segment height of .540” (14mm)  Specifications: H8D - General...
    $93.00
    Choose Options
  • Diamond Turbo Contour Blade
    Add to Cart

    Diamond Tool Store

    Diamond Turbo Contour Blade

    $79.99
    Diamond Contour Blade For Cutting Curved Lines On Stone And Concrete Features: Premium diamond controur blade with turbo rim is perfect for granite, marble, concrete, or any other natural stone types.  Perfect for cutting curved lines with small...
    $79.99
    Add to Cart
  • Diamond X Cutter Small Diameter
    Choose Options

    Diamond Tool Store

    Diamond X Cutter Small Diameter

    MSRP: $29.71
    $20.80
    Diamond X Cutter Small Diameter DRY / WET Application : Steel, Stainless Steel, Bolts, Non-Ferrous Materials, Plastics, Wood, Concrete, Tile Equipment : Angle Grinder Item Description Note DTS-DXE0130P02053 2 x .050 x...
    MSRP: $29.71
    $20.80
    Choose Options
  • wet/dry
    Diamond X Cutting & Grinding Wheels (Type 1)
    Choose Options

    Diamond Tool Store

    Diamond X Cutting & Grinding Wheels (Type 1)

    MSRP: $100.00
    $70.00
    Cutting & Grinding Wheels (Type 1) DRY / WET Application : Foundry-gate/rise removal, forgings, metal pipe, sectional tubing, metal plate Equipment : Angle Grinder Item # Description Note DTS-DXB0125P0414A 4 x .137 x...
    MSRP: $100.00
    $70.00
    Choose Options
  • Eclipse II Front View Eclipse II
    Choose Options

    Alpha Tools

    Eclipse II

    $33.48
    Diamond Blade for general purpose use on common building materials such as masonry, concrete, and tile  Alpha® Eclipse II is ideal for general purpose use on common building materials such as masonry, concrete and tile. Alpha® Eclipse II...
    $33.48
    Choose Options
  • Eclipse Q Over View Eclipse Q
    Choose Options

    Alpha Tools

    Eclipse Q

    $34.10
    High-End General Purpose Turbo Blade for Stone Fabricators Alpha® Eclipse Q is ideal for general purpose use on common building materials such as masonry, concrete and tile. Together with the Quad Drive adapter, this blade is designed to fit on most...
    $34.10
    Choose Options
  • First-Cut BASIC Early Entry Blades | Green First-Cut BASIC Early Entry Blades | Purple
    Choose Options

    Diamond Products

    First-Cut BASIC Early Entry Blades

    $79.00
    First-Cut BASIC Early Entry Blades Good Quality, Long Life Cutting First-Cut™ blades are part of the True Early Entry System for cutting control/relief joints in green concrete. Sold individually or packaged with skid plate...
    $79.00
    Choose Options
  • 6000- Black Soft Aggregate 5000- Yellow Medium Soft Aggregate
    Choose Options

    Diamond Products

    First-Cut EXPERT Early Entry Blades

    $175.00
    First-Cut EXPERT Early Entry Blades are part of the True Early Entry System for cutting control/relief joints in green concrete Very High Quality, Longer Life Cutting First-Cut™ blades are part of the True Early Entry System for...
    $175.00
    Choose Options
  • GC 20 Early Entry Concrete Blade - Hard Aggregate
    Choose Options

    MK Diamond

    GC 20 Early Entry Concrete Blade - Hard Aggregate

    $127.00
    GC 20 Early Entry Green Concrete Cutting Blade for Hard Aggregate Green Cut dry cutting diamond blades are laser welded for use in green concrete. They are for early entry sawing of crack control joints within one to two hours of concrete...
    $127.00
    Choose Options
  • Overview | Turbo High Speed | Concrete Blade
    Choose Options

    Diamond Products

    Graviton Turbo Blade for Concrete Cutting

    $35.00
    Turbo high speed with wave design for cutting concrete, brick and block.    Good Cutting Life ideal for cutting concrete, brick and block.  Wavy core enhances cutting speed Continuous rim turbo style for a smooth cut
    $35.00
    Choose Options
  • General Purpose | Fast Cutting | Concrete Blade
    Choose Options

    Diamond Tool Store

    Heavy Duty Orange H.P. Turbo Blade

    $104.00
    Heavy Duty Orange H.P. Turbo Blades    HPT5H - Hard Materials, Fast Cutting Better quality for very fast cutting in general purpose hard materials, pavers, hard brick/block and stone  Longer blade life
    $104.00
    Choose Options
  • Heavy Duty | Concrete | Orange High Speed | Turbo Blade
    Choose Options

    Diamond Products

    Heavy Duty Orange Turbo

    $110.00
    Heavy Duty Orange High Speed Turbo Blades   Very high quality diamond and longer cutting life for cutting General purpose concrete, brick and block.  Diamond Depth: .220” (6mm) Segment Height: .320” (8mm)    
    $110.00
    Choose Options
  • Heavy Duty Orange | Tuck Point | Diamond Blades
    Choose Options

    Diamond Products

    Heavy Duty Orange V-Crack Tuck Point Diamond Blade

    $337.00
    Heavy Duty Orange V-Crack Tuck Point Diamond Blades Very high quality diamond and longer cutting life   Heavy Duty Orange Tuck Point V-Crack Diamond Blades Very high quality diamond and longer cutting life Cleans, routs and repairs...
    $337.00
    Choose Options
  • MK Diamond TX-60 Professional Masonry Blade - 10inch
    Add to Cart

    MK Diamond

    MK Diamond TX-60 Professional Masonry Blade - 10inch

    $179.00
    MK Diamond TX-60 Professional Masonry Blade - 10inch TX-60 is ideally suited for all kinds of masonry materials. This continuous rim "turbo style" diamond blade produces fast, clean cuts and maximizes the power and versatility of your TX-3 saw...
    $179.00
    Add to Cart
  • wet/dry
    Narrow Notch Turbo Blade for Hard Material - Standard
    Choose Options

    Diamond Tool Store

    Narrow Notch Turbo Blade for Hard Material - Standard

    MSRP: $13.40
    $9.20
    Narrow Notch Turbo Blade for Hard Material - Standard DRY / WET Application : Granite, Marble, Hard Brick, Hard Paver Equipment : Angle Grinder, Circular Saw, High Speed Saw, Table Saw   item # Description Note RB10MT0408B 4 X...
    MSRP: $13.40
    $9.20
    Choose Options
  • On Sale
    wet/dry
    PCD Blade
    Choose Options

    Diamond Tool Store

    PCD Blade

    MSRP: $125.71
    Now: $88.00
    Was: $125.71
    PCD Blade DRY / WET Application : Removing caulking or joint sealant compound from concrete and masonry joints Equipment : Angle Grinder, Circular Saw Item # Description Note PCDCUTTER45C4 4.5 X 7/8-5/8, PCD SEG, 4 EA Call...
    MSRP: $125.71
    Now: $88.00
    Was: $125.71
    Choose Options
  • Premium Black Cured Concrete Blades
    Choose Options

    Diamond Products

    Premium Black Cured Concrete Blades

    $580.00
    Concrete Cutting Blades designed for premium cutting on green concrete   .275" Diamond Depth A high quality blade that delivers long lasting, fast cutting performance. Designed for contractors who demand maximum efficiency and value. 1"...
    $580.00
    Choose Options
  • Premium T Seg | Concrete | Turbo High Speed | Diamond Blades
    Choose Options

    Diamond Products

    Premium T-Seg Turbo High Speed Blade

    $59.00
      Premium T-Seg Turbo Blades General purpose cutting in concrete and masonry General purpose cutting in concrete and masonry Special T-Segment offers built-in core protection Blades 7” and above come with a 7/8” bushing...
    $59.00
    Choose Options
  • Pro Blue Cured Concrete Diamond Blades - T
    Choose Options

    Diamond Products

    Pro Blue Cured Concrete Diamond Blades - T

    $613.00
    Pro Blue Cured Concrete Diamond Blades by Diamond Products    Professional Blue-T .310” Diamond Depth  Professional Blue Plus-T+ .310” Diamond Depth Additional diamond concentration for longer life Same high...
    $613.00
    Choose Options
  • Pro Blue Cured Concrete Diamond Blades - T+
    Choose Options

    Diamond Products

    Pro Blue Cured Concrete Diamond Blades - T+

    $574.00
    Diamond Blade for Cutting Cure Concrete available for different types of concrete hardness   Professional Blue-T .310” Diamond Depth  Professional Blue Plus-T+ .310” Diamond Depth Additional diamond concentration for...
    $574.00
    Choose Options
  • wet/dry
    Close Up - Economy Sandwich Tuck Point Economy Sandwich Tuck Point
    Choose Options

    Diamond Tool Store

    Sandwich Double Tuck Point Blade - Economy

    $26.75
    Sandwich Double Tuck Point Blade - Economy DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder Model Description Seg. Height DTS-ID30ET4508CDB 4.5 X .250 X 7/8-5/8, SANDWICH DOUBLE BLADE 10MM (...
    $26.75
    Choose Options
  • wet/dry
    Standard Sandwich Tuck Point Blade Standard Sandwich Tuck Point Blade
    Add to Cart

    Diamond Tool Store

    Sandwich Double Tuck Point Blade - Standard

    MSRP: $50.29
    $35.20
    Sandwich Double Tuck Point Blade - Standard DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder Model Description Seg. Height SM30CT0408CDB 4 X .250 X 7/8-5/8, SANDWICH DOUBLE BLADE 10MM (...
    MSRP: $50.29
    $35.20
    Add to Cart
  • On Sale
    wet/dry
    Saw Blade for Hard Material - Supreme
    Choose Options

    Diamond Tool Store

    Saw Blade for Hard Material - Supreme

    MSRP: $24.29
    Now: $17.00
    Was: $24.29
    Saw Blade for Hard Material - Supreme DRY / WET Application : Hard Concrete, Reinforced Concrete, Hard Paver Brick Equipment : Angle Grinder, Circular Saw Key slot  Available Size:  4", 4.5", 5", 6", 7", 8", 10"  
    MSRP: $24.29
    Now: $17.00
    Was: $24.29
    Choose Options
  • SawMaster Asphalt Segmented Blades SawMaster Asphalt Segmented Blades | Close View
    Choose Options

    SawMaster

    SawMaster Asphalt Segmented Blades

    $127.27
    Asphalt Segmented Blades - Premium Wet or Dry Cutting The SA Series Segmented Blades are best suited for highly abrasive materials, such as asphalt and green concrete. To protect against segment loss and excessive wear on the steel core, these...
    $127.27
    Choose Options
  • SawMaster

    SawMaster Concrete Segmented Blades

    Concrete Segmented Blades - Premium Wet or Dry Cutting The SC Series Segmented Blades are designed for cured concrete with medium to hard aggregates. Cured concrete is generally concrete that has been allowed to set for more than 7 days...
  • SawMaster Crack Chaser

    SawMaster

    SawMaster Crack Chaser

    Crack Chaser - Standard The CC Series Crack Chaser Blades are designed to repair concrete cracks by routing and grooving existing cracks to widen it for resealing. Crack chasers are ideal for right angle grinders. ApplicationsRepair Concrete...
  • SawMaster

    SawMaster Diamond Pattern Rim Blades - Natural Stone

    Natural Stone Diamond Pattern Rim Blades - Premium Wet or Dry Cutting The CD Series Diamond Pattern Rim Blades are intended for a single purpose: natural stone cutting. Sharing the same benefit of enhanced air cooling as standard turbo rim blades,...
  • SawMaster Masonry Segmented Blades
    Add to Cart

    SawMaster

    SawMaster Masonry Segmented Blades

    $31.90
    Masonry Segmented Blades - Premium Wet or Dry Cutting The SM Series Masonry Segmented Blades are designed to provide maximum cutting performance on hard materials such as hard bricks and medium-hard materials such as blocks. ApplicationsBrick...
    $31.90
    Add to Cart
  • SawMaster

    SawMaster Masonry Turbo Segmented Blades

    Masonry Turbo Segmented Blades - Premium Wet or Dry Cutting The ST Series Masonry Turbo Segmented Blades excel at fast, aggressive cutting of masonry and concrete materials. These high speed blades are commonly equipped on handheld chop saws. Turbo...
  • wet
    SawMaster Masonry Wet Cutting Blades

    SawMaster

    SawMaster Masonry Wet Cutting Blades

    Masonry Wet Cutting Blades - Standard The PSM-W Series Segmented Blades are general purpose, wet masonry blades for use with table saws (that operate at a lower RPM than high-speed hand-held saws). They can be used with bricks of varied hardness...
  • Choose Options

    SawMaster

    SawMaster Narrow Turbo Rim Blades - Concrete/Masonry

    $22.22
    Concrete/Masonry Narrow Turbo Rim Blades - Supreme Wet or Dry Cutting The CT-G Series Turbo Rim Blades are ideal for concrete/masonry applications due to its abrasive-resistant bonding system, which guarantees optimal performance during the blade's...
    $22.22
    Choose Options
  • SawMaster Sinter Segmented Blades

    SawMaster

    SawMaster Sinter Segmented Blades

    Sinter Segmented Blades - Standard  The SR Series Segmented Blades are cost-effective blades intended for single use or for small jobs, especially in the DIY market. The sinter manufacturing process enables the use of the entire segment, much...
  • Choose Options

    SawMaster

    SawMaster Turbo Rim Blades - General Purpose/Masonry

    $21.50
    General Purpose/Masonry Turbo Rim Blades - Standard Wet or Dry Cutting The TB-S Series Turbo Rim Blades possess wide turbo sections designed for aggresive abrading of a wide range of materials, resulting in faster cutting speeds. In addition, the...
    $21.50
    Choose Options
  • SawMaster

    SawMaster Wide Turbo Segmented Blades - Hard Material

    Hard Material Wide Turbo Segmented Blades - Premium Wet or Dry Cutting The TS Series Turbo Segmented Blades are engineered to cut hard materials such as granite and cured concrete. Its unique design provides undercut protection for the diamond...
  • Shark Utility/Rescue Diamond Blade
    Choose Options

    Diamond Tool Store

    Shark Utility/Rescue Diamond Blade

    $40.00
    Shark Rescue Blades Features:  This diamond blade is perfect for cutting almost anything! This durable diamond blade will cut through stone, concrete, glass, or even metal! Smaller teeth on the diamond segments make this blade possible...
    $40.00
    Choose Options
  • wet/dry
    Close Up - SL30P Flush Cut Blade Close Up - SL30P Flush Cut Blade
    Choose Options

    Diamond Tool Store

    SL30P Flush Cut Blade

    MSRP: $49.71
    $34.80
    SL30P Flush Cut Blade Ideal for Wet Cutting of Masonry and Concrete Features:  SL30P Flush Cut Blade Premium DRY / WET Application : Masonry, Concrete Equipment : Angle Grinder Specifications: Item#SizeArborSegment HeightMax...
    MSRP: $49.71
    $34.80
    Choose Options
  • Overview | Core Cut | Standard Gold | Diamond Blade
    Choose Options

    Diamond Products

    Standard Gold Tuck Point Blade

    $180.00
    Standard Gold Segmented Tuck Point Diamond Blades Better quality diamond and better cutting value   Diamond Depth: .187” (5mm) Segment Height: .287” (7mm)
    $180.00
    Choose Options
  • Standard Gold H.P. Turbo Blades
    Choose Options

    Diamond Products

    Standard Gold H.P. Turbo Blades

    $104.00
    Standard Gold H.P. Turbo Blades Better quality diamond and better cutting value     Better quality diamond and better cutting value Very fast cutting Better blade life SizePackage QuantityPart NumberCatalog Number 24" x ...
    $104.00
    Choose Options
  • Overview | High Speed | Star Blue | Diamond Blade
    Choose Options

    Diamond Products

    Star Blue High Speed Diamond Blades

    $18.00
    Star Blue High Speed Diamond Blades Good quality diamond and good cutting value Good quality diamond and good cutting value Diamond depth of .375” (10mm) Segment height of .475” (12mm) 
    $18.00
    Choose Options
  • Star Blue High Speed Diamond Blades -H8B
    Choose Options

    Diamond Products

    Star Blue High Speed Diamond Blades -H8B

    $118.00
    Star Blue High Speed Diamond Blades -H8B that offers good quality diamonds and good cutting value Good quality diamond and good cutting value Diamond depth of .375” (10mm) Segment height of .475”...
    $118.00
    Choose Options
  • Overview | Star Blue | Tuck Point | Core Cut | Diamond Products
    Choose Options

    Diamond Products

    Star Blue Tuck Point Blade

    $68.00
    Star Blue Segmented Tuck Point Diamond Blades Good quality diamond and good cutting value   Diamond Depth: .250” (6mm) Segment Height: .350” (9mm)
    $68.00
    Choose Options
  • wet/dry
    Tuck Point Blade - Economy
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Economy

    MSRP: $26.20
    $18.40
    Tuck Point Blade - Economy   DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder   Model Description Seg. Height DTS-PMX30MT0425C 4 X .250 X 7/8-5/8 10MM (.394") DTS-PMX30MT4525C 4.5 X...
    MSRP: $26.20
    $18.40
    Choose Options
  • wet/dry
    Tuck Point Blade - Plus Ariel View | Tuck Point Blade - Plus
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Plus

    MSRP: $36.57
    $25.60
    Tuck Point Blade - Plus  DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder Model Description Seg. Height DTS-PM30N0425C 4 X .250 X 7/8-5/8 10MM (.394") DTS-PM30N0450C 4...
    MSRP: $36.57
    $25.60
    Choose Options
  • wet/dry
    Tuck Point Blade - Premium
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Premium

    MSRP: $90.00
    $50.60
    Tuck Point Blade - Premium DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder Model Description Seg. Height DTS-PM30P0437C 4 X .375 X 7/8-5/8 10MM (.394") DTS-PM30P4525C 4.5 X .250 X...
    MSRP: $90.00
    $50.60
    Choose Options
  • wet/dry
    Tuck Point Blade - Punch Hole Core
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Punch Hole Core

    MSRP: $34.30
    $24.00
    Tuck Point Blade - Standard    Tuck Point Blade Standard DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder      Model Description Seg...
    MSRP: $34.30
    $24.00
    Choose Options
  • wet/dry
    Tuck Point Blade - Standard Ariel View | Tuck Point Blade - Standard
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Standard

    MSRP: $29.14
    $20.40
    Tuck Point Blade - Standard Tuck Point Blade Standard DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder    Model Description Seg...
    MSRP: $29.14
    $20.40
    Choose Options
  • wet/dry
    Tuck Point Blade - Super Economy Ariel View | Tuck Point Blade - Super Economy
    Choose Options

    Diamond Tool Store

    Tuck Point Blade - Super Economy

    MSRP: $21.14
    $15.20
    Tuck Point Blade - Super Economy   DRY / WET Application : Mortar, Masonry, Concrete Equipment : Angle Grinder Model Description Seg. Height DTS-PM30CT0425C 4 X .250 X 7/8-5/8 10MM (.394") DTS-PM30CT4525C 4.5 X .250 X...
    MSRP: $21.14
    $15.20
    Choose Options