Miscellaneous Handling Accessories

 Aardwolf Slab Rack Extra Strong post 50x50x5 - Can be combined with Slab Rack Base Rail for complete storage of stone slabs   ASR06 ASR07 ASR08 ASR09 ASR10 Yield strength 345Mpa 345Mpa 345Mpa 345Mpa 345MPA Wall...

 Abaco Spare Poles   

60" x 2 3/8" x 2 3/8" Square Poles for the Weha Bison Slab Racks Galvanized with White Rubber Cap with Angle Bracket   Each 60" Pole comes complete with: A White Rubber Cap to protect the slabsWelded Angle Bracket to set the correct angle for...

Aardwolf CNC Tooling Cart 30 Includes 30 tool holders. The tooling table has two levels of tool holders with 15 tool holders per level. The top shelf includes a 3mm thick rubber layer. The lower shelf can be adjusted with three possible locations...

CNC Tooling Cart 42 Includes the 42 tool holders. The tooling table has two levels of tool holders with 21 tool holders per level. The top shelf includes a 3mm thick rubber layer. The lower shelf can be adjusted with three possible locations...

Aardwolf CNC Tooling Rack Includes the 15 tool holders. The tooling rack has two levels of tool holders. Features Angled for easier selection of stored tools Mounts on bench top Heavy gauge steel with epoxy powder...

Aardwolf Endless Webbing Sling - 1Tons Complemented with a protective sleeve. Specifications Material: 100% high tenacity polyester Colour: Violet   Metric  (mm-kg) Imperial  (inch-lbs) Webbing...

Aardwolf Endless Webbing Sling - 2Tons Complemented with a protective sleeve. Specifications Material: 100% high tenacity polyester Colour: Green     Metric  (mm-kg) Imperial  (inch-lbs) Webbing...

Aardwolf Endless Webbing Sling - 3Tons Complemented with a protective sleeve. Specifications Material: 100% high tenacity polyester Colour: Yellow   Metric  (mm-kg) Imperial  (inch-lbs) Webbing width 90 3...

Aardwolf Fiberglass Cutting Stand including Hack Saw Designed to hold and dispense fibreglass support rods. The fibreglass dispenser stand comes with two wheels for easy transportation. 

Aardwolf Fork Hook Attachment - Double Fork Converts a forklift into a mobile crane in seconds. Welded steel construction.  Features Attaches easily with hand screws and a 36" L safety chain with safety latch which attaches to the forklift The...

Aardwolf Fork Hook Attachment - Single Fork The Fork Hook Attachment - Single Fork can be attached with hand screws and a chain. Welded steel construction. Features Attaches easily with hand screws and a 36" L safety chain with safety latch which...

Aardwolf Hand Vacuum Cup with built in pressure gauge for safe manual lifting of stone and glass The Hand Vacuum Cup is made of strong durable aluminium together with an ergonomic handle and includes an integrated vacuum gauge and priming pump...

Aardwolf Ratchet Tie Down 1' Used for lightweight applications. Features End Fitting: S hook Material - 100% high tenacity polyester Colour: Yellow...

Aardwolf Ratchet Tie Down 2' Durable and reliable. Used where it is important to have a high minimum break strength. E.g. for lashing loads on vehicles. Specifications Material: 100% high tenacity polyester Colour: Yellow End Fitting: Double J...

Aardwolf Replacement Rubber Strips - 20m Roll Optional for frames. Added to the frame to prevent scratches on the materials. Specifications    Metric  (mm-kg) Imperial  (inch-lbs) Net weight 8...

Aardwolf Swivel Hook (Alloy steel) With Aardwolf Swivel Hooks and some simple operations, a forklift can be converted into a mobile crane. Made of construction-grade steel, the Swivel Hook can be easily attached to forklifts with hand screws and a 915mm...

Aardwolf Vertical Polishing Frame 1300 Edge polishing stand for polishing granite that is standing vertically on edge, as opposed to horizontal polishing. Provided with two rubber-lined support rails, both of which are height adjustable. The upper...

Aardwolf Vertical Polishing Frame 1800 Edge polishing stand for polishing granite that is standing vertically on edge, as opposed to horizontal polishing. Provided with two rubber-lined support rails, both of which are height adjustable. The upper...

Aardwolf Vertical Polishing Frame 2400 Edge polishing stand for polishing granite that is standing vertically on edge, as opposed to horizontal polishing. Provided with two rubber-lined support rails, both of which are height adjustable. The upper...

Vertical Polishing Frame 700 Edge polishing stand for polishing granite that is standing vertically on edge, as opposed to horizontal polishing. Provided with two rubber-lined support rails, both of which are height adjustable. The upper support rail is...

Stone Wedgee creates ideal space between slabs for storage Decrease the likelihood of employee fatalities and injuries while moving slabs more efficiently. The Wedgee safety tool creates the ideal space between slabs, whether 2 or 3cm, so the Aardwolf...

Abaco Bow Shackle deal for straight lifts where rotation is not an issue Can be used with our forklift booms and lifters Item Number Size W.L.L. Net Weight Ship Weight ABS22 7/8 3300 2.6 5 Shipping weights may vary due to...

Abaco Cable Connect Sling allows for extra lifting room Allows for extra lifting room Can be used with our forklift booms and lifters    

Granite Display Racks Design for displaying finished slabs Constructed of two symmetric four layer tiers Tiers are joined by two fully adjustable cross rails Two additional base rails provide added stability Two swivel casters and two rigid...

Abaco Hook Forklift   - Abaco Hook Forklift is a supporting device when moving material from one place to another. - Abaco Hook Forklift has double safety features to avoid from slipping off from the forks. One is stopper levers to restrain the...

Slab Wedgee creates space between slabs when storing slabs  Minimize the likelihood of worker injuries while moving slabs more efficiently. The Slab Wedgee can create an ideal space between the slabs to place the Lifting Clamp to lift the...

Abaco Stone Splitter is designed to support for splitting the interlocking paver block in constructions   The splitting action is in an eye's blink. - Utilizing Abaco Stone Splitter helps reducing labor and ensures safety and speedy...

Lifting And Handling Accessory | Allows for easy rotation of material Comes standard with Little Giant Lifters Allows for rotations of material Can be used with our forklift booms  

Backsplash Attachment - Set Weha Backsplash Attachment Set of 5 For Weha Transport A Frame CartSet of 5 Fits all Weha Transport A Frame CartsGalvanized with rubber lining Holds Granite and Stone back splashes for easy transport Holds suction...

Rubber Matting for Bridge Saw Tables Dimensions: 39" x 39" x 3/4"

Cross Bar for Weha A frame Storage Slab Rack Bolts to the Weha A frame Storage rack to lock the 2 A frames together. 60" long

Groves BSBPKG-1 Back Splash Bracket Package SAFETY WARNING: Use .5″ holes located on bottom flange for securing rails to the floor. MAXIMUM WEIGHT ALLOWED PER BUNDLE: 6,000 LBS. (3,000 LBS. PER POST) Features One row with four levels of back...

Groves Backsplash Package 2 for storing, moving, and installing countertop backsplash SAFETY WARNING: Use .5″ holes located on bottom flange for securing rails to the floor. MAXIMUM WEIGHT ALLOWED PER BUNDLE: 6,000 LBS. (3,000 LBS. PER...

Miscellaneous Casters and Tires for Groves Fabrication Tables and Carts     Caster Kit For TR4482 And TR4496   8" diameter roller bearing wheels Rated at 1,000 lb. capacity each Two swivel casters with brakes on one end and two...

Groves Economy Granite Transport Rack with a weight capacity of 3,600 pounds! Economical cart designed for transporting and storing product in your shop or on the job. Included heavy duty 5″ casters with quick release mounting pins change the...

Cart For Installing Granite Countertop with six shelf levels to aid in moving cut backsplashes around the shop and on the job Cart has six shelf levels to aid in moving cut backsplash around the shop. Features  Heavy duty 3,200 pound weight...

Material Handling Equipment by Groves The Heavy Duty Tranpsort Racks are designed for transporting and storing product in your shop or on the job. Fork lift hoops mounted on sides. Bottom pads and uprights have full length rubber strips. Quick release...

Heavy Duty Transport Rack - The Strongest Transport Rack in the Industry Transport Rack – 10,000 Lb Capacity – TR-10 Designed for fabrication and transportation of products to the job site (Please see our shop cart or glass carts for...

Groves Sample Display Rack Safely display 26 - 10" x 10" product samples. Durable black powder coat finish. Easy assembly and ships knocked down for Freight savings. 21" wide, 74" High and weighs 53lbs. 

Groves Single-Sided Truck Racks designed to transport slabs in a vehicle Truck rack designed to transport all sizes of fabricated product with mounting pads front and back for bolting to the truck floor. Features Heavy duty construction fabricated...

Groves Stacking Racks | Storing and Stacking Slabs of Stone Storage of remnants, cut offs, strips and cut to size pieces. Jobsite cart for safe transport and handling of countertops, vanity tops, saddles, sills and stair treads. Features Designed to...

Jescraft Hot Mop Buckets for roofing professional  Features: All steel construction Formed strengthening ribs Available in 12" or 14" I/D Recessed insert bottom to dissipate heat Common Uses: Used to transfer hot tar on flat roofs to...

Jescraft Hot Tar Quart Dippers for professional roofers  Features:Available in 6 or 9 quart capacityMade of 16 gauge steelTapered round steel receiver handle Common Uses:Used to transfer hot tar on flat roofs to mop carts or to pour directly on...

LC Clamp Assembly is an accessory for Omni Cubed Lam Clamp    One complete clamp assembly for any model Lam-Clamp.

Miter-It Corner Clamp The Miter-It™ is an easy-to-use jig that allows finished-side-up miter laminations. Not flipping the material offers numerous benefits including increased safety for workers, reduced risk of damage to the material, and...

Miter Clamps  The Miter-It is an easy-to-use jig that allows finished-side-up miter laminations. Not flipping the material offers numerous benefits including increased safety for workers, reduced risk of damage to the material, and keeping the seam...

Omni Cubed Pro Cart AT1-Cart Dolly The Pro-Cart AT1 Folding Kit is an upgrade accessory that allows the cart casters to be rotated under the main support rail, allowing for even easier storage (reduces cart width to less than 10” wide)...

 Rechargeable Power Pack Kit The NEW Rechargeable Power Pack features a 12V Li-ion battery that lasts up to 5 hours on a single charge, and has an LCD display showing the remaining power level, so you never have to wonder if your battery will last...

Work Table Wheel Without Brake Get a replacement caster (wheel) without a brake for your Weha worktable. This replacement wheel is designed for use on Weha work tables. It does not have a brake to lock the wheel in place while resting...

Replacement Parts for A Frame Transport Carts   Replacement Poles   Weha USA Stocks the full line of replacement parts for the Weha Single Sided and Double Sided Transport A Frame Carts. Weha offers 3 different lengths of Replacement...

Replacement Poles for granite transporting carts and racks Comes complete with: UprightNew RubberNew Blue StrapNew Brass Hook     7 Big Differences of Weha to other Transport Cart Companies Blow 1. Premium European Grade...

Replacement Rubber Pad for Gecko Carry Clamp - 1 each

Sink Hole Saver  Edge Clamp Assembly The NEW Sink Hole Saver™ Edge Clamp Assembly has a wider clamping range, enhanced tightening knobs, and new rubber bumper guards to protect finished edges. This clamp is compatible with any Sink Hole...

Type a description for this product here...   The NEW Sink Hole Saver™ Pump Kit features a more durable, compact vacuum pump with a greater airflow rate than previous models. The pump also has an improved external housing to be more...

Sink Hole Saver Angle Bracket   The Sink Hole Saver Angle Bracket connects two Sink Hole Savers to create a rigid joint at any angle up to 270° for safe transportation of uniquely shaped countertops...

Sink Hole Saver Cup Assembly    The NEW Sink Hole Saver™ Cup Assembly features a proprietary, non-marking vacuum cup with triple sealing rings for a strong, reliable hold—even on textured and leathered surfaces. This cup...

Sink Hole Saver Extension Bracket Kit The NEW Sink Hole Saver™ Extension Bracket Kit combines two Sink Hole Saver™ Manuals into one adjustable-length rail for greater versatility and convenience. Cups can be removed as needed for extra range...

Sink Hole Saver™ Vertical Lifting Handle Kit   The NEW Sink Hole Saver™ Vertical Lifting Handle Kit attaches to vacuum cup Sink Hole Savers to make vertical panel installations safer, faster, and...

Slab Edge Guard When at rest, Slab Edge Guard supports countertops, stone panels, finish pieces, etc. to avoid breaking. It is Simple, effective, and easy to use. Compact, light weight, and easy to carry around. Available in white for light colored...

Slab Edge Saver - 20 Pieces per box  Get slab edge savers for granite and other natural and engineered stone slabs designed to protect slab edges from chipping and breaking. Slab edge savers are designed to cover the edge(s) of natural and other...

Stone Sling – SL-102 SAFETY WARNING: Check slings forwear and damage before each use.   SKU: SL-10 2Dimensions: 3" x 102" Endless Loop Weight: 30 Lbs.

Weha Stone Waste Bag with Handles for stone and material scrap, sludge, waste Use for stone wastes, paving-stones, sand, split, gravel. Small dead weight, high ultimate tensile strength, fully recyclable. Weha Stone waste Bag with handle loops allow...

The Weha 7' replacement bar for the Weha Suction Cup Assembly is to replace a damaged or lost bar that came with the Weha Suction Cup Assembly set.   The bar is designed to be used with the Weha Double Suction cups, part # 8010422These are sold...

Castor Wheels for new style Transport A Frame Cart - 2 Fixed 2 Swivel with Metal A Frame Connection. Set of 4 The Weha Transport A Frame Cart Wheels are the latest design for Weha Transport Carts.These wheels slide up into granite A frame base receivers...

Continuous duty, highly efficient (1/2 CFM) vacuum source for extremely strong and reliable hold of Miter-It™ Auto clamps. The Venturi Vacuum Generator simultaneously powers up to 10 vacuum cups for various applications. Use with other Omni Cubed...

Weha Counter Top Support Brackets Set of 3 plus 12 2" Screws. For Granite, Marble, Quartz, Quartzite, Engineered Stone, Concrete Counter Tops Weha Counter Top Support Brackets are made to replace Corbels on granite, marble, quartz, quartzite counter top...

Heavy Duty Fab Stand With Collapsible Supporting Legs    The Weha Pit Heavy Duty Fabrication Stands are applicable for many workshop jobs. By means of mechanical cranking the trestles can be invariably adjusted to any desired working height...

WEHA REPLACEMENT FOAM RING FOR VACUUM LIFTER Replacement Foam Ring for the Weha Vacuum lifters for pad sizes 6" x 21"Fits: T900 T1500 Actual dimensions of Foam Ring: 10" x 25" x 3/4"

The Stone Slab Wedge is designed to separate bundles so that the clamps can pick up a slab     Made out of extremely hard plastic 10" long 2.5" blade with Separates the slab by 2 3/4" There is a 40mm notch at the top of the wedge for...

Weha Swivel hook and shackle for forklift boom, over head crane, jib crane.SIKA-SWIVEL HOOK type WHS 10-8 Swivel hook for forklfit booms to attach lifters, cables, slings, etc. Safety push metal clip to prevent attachments from slipping or bouncing out...

White Rubber Caps for the Weha Buffalo and Bison Slab Storage Racks

Aardwolf Fork Mounted Vacuum Lifting Attachment  The Fork Mounted Vacuum Lifting Attachment is designed to lift and lower sheet materials. The device combines with a vacuum lifter with a fork truck and remote control for handling diversified types...

Aardwolf Steel post base 1200-1400 Steel Post Base for accurately setting a 4° slab lean. Designed for slab and bundle rack posts with a height of 1200 or...

Steel Post Base for supporting the slab and bundle racks post Steel Post Base for accurately setting a 4° slab lean. Designed for slab and bundle rack posts with a height of 1600 or 1800mm...