190,000 BTU Kerosene Forced Air Heater w/ Temperature Control & Read-Out - MH-0190-0M10
With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.
Motor: Heavy-duty, cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components:Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires
Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuelImportant Notes:
- Not for use in residential living areas or inadequately ventilated areas.
- Proper ventilation required during operation.
- Must be plugged into an approved standard electrical outlet for operation.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
|Heat Output||190,000 BTU|
|Hot-Air Flow||630 CFM|
|Air Pump Pressure||8.5 PSI|
|AC Power||120V, 60Hz, 2.7 Amps|
|Motor Size||1/4 HP|
|Fuel Tank Capacity||13.0 gallons|
|Fuel Consumption||1.42 gal./hr.|
|Max. Operating Hours||9.1 hours|
|Heating Area||4,300 sq. ft.|
|Digital Temp. Read-Out||Yes|
|Error Indicator Read-Out||Yes|
|Parts Storage System||Yes|
Weights & Dimensions:
|Net Weight||60.00 lbs.|
|Shipping Weight||68.00 lbs.|