With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.

Motor: Heavy-duty, cast aluminum enclosed electric motor

Burner Head: 1-piece cast aluminum

Components:Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires

Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel

Important Notes:
  • Not for use in residential living areas or inadequately ventilated areas.
  • Proper ventilation required during operation.
  • Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.


Heat Output 600,000 BTU
Hot-Air Flow 3,000 CFM
Air Pump Pressure 128 PSI
AC Power 120V, 60Hz, 5.5 Amps
Motor Size 5/8 HP
Fuel Tank Capacity 40.0 gallons
Fuel Consumption 4.50 gal./hr.
Max. Operating Hours 8.9 hours
Heating Area 15,000 sq. ft.
Multi-Fuel Capable Yes
Digital Temp. Read-Out Yes
Error Indicator Read-Out Yes
Parts Storage System Yes

Weights & Dimensions:

Net Weight 320.00 lbs.
Shipping Weight 376.00 lbs.
Length 75.00 in.
Width 34.00 in.
Height 43.00 in.