75,000 BTU Kerosene Forced Air Heater w/ Temperature Control & Read-Out - MH-0075-0M10
With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.
Motor: Heavy-duty, cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components:Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires
Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuelImportant Notes:
- Not for use in residential living areas or inadequately ventilated areas.
- Proper ventilation required during operation.
- Must be plugged into an approved standard electrical outlet for operation.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
|Heat Output||75,000 BTU|
|Hot-Air Flow||240 CFM|
|Air Pump Pressure||3.8 PSI|
|AC Power||120V, 60Hz, 1.5 Amps|
|Motor Size||1/8 HP|
|Fuel Tank Capacity||5.0 gallons|
|Fuel Consumption||0.56 gal./hr.|
|Max. Operating Hours||8.9 hours|
|Heating Area||1,700 sq. ft.|
|Digital Temp. Read-Out||No|
|Error Indicator Read-Out||No|
|Parts Storage System||No|
Weights & Dimensions:
|Net Weight||28.00 lbs.|
|Shipping Weight||33.00 lbs.|