{"product_id":"akula™-series-harness-5pt-padded-back-legs-qcb-positioning-belt-side-d-rings-back-and-dual-front-d-rings-black","title":"Akula™ Series Harness 5pt., Padded Back\/Legs, QCB, Positioning Belt Side D-Rings, Back and Dual Front D-Rings, Black","description":"\u003ch2\u003eAkula™ Series 5-Point Full Body Harness — Padded, Multi-D-Ring Configuration for Fall Arrest and Work Positioning\u003c\/h2\u003e\n\u003cp\u003eThe Palmer Safety Akula™ Series H22312162 is a 5-point full body harness engineered for contractors and trades professionals who require versatile fall protection across multiple work modes. Constructed with all-black aluminum hardware and 1.73 in. polyester webbing rated to 5,000 lbs. breaking strength, this harness supports fall arrest, work positioning, climbing, and controlled descent applications. The integrated padded back and padded leg straps, combined with quick-connect buckles on all leg straps, allow for rapid donning and doffing on the job site. It meets or exceeds ANSI Z359.11-2021 and A10.32-2012 standards and is available in Small\/Medium and Large\/X-Large sizing to accommodate users from 130 to 420 lbs.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (S\/M)\u003c\/td\u003e\n\u003ctd\u003eH22312162.S\/M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (L\/XL)\u003c\/td\u003e\n\u003ctd\u003eH22312162.L\/XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarness Series\u003c\/td\u003e\n\u003ctd\u003eAkula\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarness Size\u003c\/td\u003e\n\u003ctd\u003eSmall, Medium, Large, X-Large\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUser Capacity\u003c\/td\u003e\n\u003ctd\u003e130 – 420 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.82 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment Points\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD-Ring Configuration\u003c\/td\u003e\n\u003ctd\u003eHarness SRL Back Plate, Dorsal (back), Side\/Hip (2), Front (2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg Straps\u003c\/td\u003e\n\u003ctd\u003eQuick Connect (QCB), H-style adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePadding\u003c\/td\u003e\n\u003ctd\u003eShoulder\/Back (sewn in), Waist, Leg (sewn in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial Features\u003c\/td\u003e\n\u003ctd\u003eQuick Connect Buckles, Tool\/Positioning Belt, Lanyard Keeper, SRL Back Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWebbing Material\u003c\/td\u003e\n\u003ctd\u003ePolyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWebbing Width\u003c\/td\u003e\n\u003ctd\u003e1.73 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreaking Strength\u003c\/td\u003e\n\u003ctd\u003e5,000 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStitching Thread\u003c\/td\u003e\n\u003ctd\u003eHigh-tenacity polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal Components\u003c\/td\u003e\n\u003ctd\u003eAll Black Aluminum Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConforms To\u003c\/td\u003e\n\u003ctd\u003eMeets or exceeds ANSI Z359.11-2021, A10.32-2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe Akula™ Series distinguishes itself from standard single-D-ring harnesses by providing five attachment points — dorsal, dual front, and dual side hip D-rings — enabling a single harness to serve fall arrest, work positioning, climbing, and controlled descent roles without swapping equipment. The all-black aluminum hardware and sewn-in padded back and leg straps reflect a purpose-built design for professionals who need durability, comfort, and compliance in one unit.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003ch4\u003e5-Point Adjustment System\u003c\/h4\u003e\n\u003cp\u003eFive independent adjustment points allow the harness to be dialed in for a secure, snug fit across a wide range of body types. Proper fit is critical to ensuring the harness performs as designed during a fall arrest event and reduces fatigue during extended wear.\u003c\/p\u003e\n\u003ch4\u003eQuick-Connect Buckles (QCB) on Leg Straps\u003c\/h4\u003e\n\u003cp\u003eQuick-connect buckles on all leg straps allow workers to don and doff the harness rapidly, reducing downtime between tasks. The H-style leg strap configuration provides additional stability and prevents the straps from shifting during movement.\u003c\/p\u003e\n\u003ch4\u003eMulti-D-Ring Configuration with SRL Back Plate\u003c\/h4\u003e\n\u003cp\u003eOne dorsal D-ring for fall arrest, two front D-rings (one for climbing, one for rope access\/ventral), and two side hip D-rings for work positioning give this harness the versatility to serve multiple fall protection applications. The integrated SRL back plate provides a dedicated, reinforced attachment point for self-retracting lifelines.\u003c\/p\u003e\n\u003ch4\u003eIntegrated Work Positioning Belt with Side D-Rings\u003c\/h4\u003e\n\u003cp\u003eThe built-in positioning belt with two side D-rings allows workers to connect a positioning lanyard and maintain a hands-free work position at height. Per ANSI Z359.11, side D-rings must never be used for fall arrest — they are rated for work positioning only, keeping the system application-specific and compliant.\u003c\/p\u003e\n\u003ch4\u003eSewn-In Padded Back and Leg Straps\u003c\/h4\u003e\n\u003cp\u003ePadding sewn directly into the back and leg strap areas reduces pressure points during prolonged suspension or extended wear, improving worker comfort and reducing fatigue on long shifts. Sewn-in construction prevents the padding from shifting or being removed in the field.\u003c\/p\u003e\n\u003ch4\u003eLanyard Keeper\u003c\/h4\u003e\n\u003cp\u003eOne integrated lanyard keeper is incorporated into the harness to store the unused leg of a Y-lanyard, keeping it out of the way and reducing trip and snag hazards on the job site.\u003c\/p\u003e\n\u003ch4\u003eAll-Black Aluminum Hardware\u003c\/h4\u003e\n\u003cp\u003eAll metal components are constructed from black aluminum, providing a lightweight yet strong hardware solution. The uniform black finish gives the harness a professional appearance and reduces glare in bright work environments.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003ch4\u003ePersonal Fall Arrest\u003c\/h4\u003e\n\u003cp\u003eConnect a fall arrest subsystem (energy-absorbing lanyard or SRL) to the dorsal D-ring on the back, between the shoulder blades, for use as a Class A personal fall arrest system. The system must be rigged to limit free fall to 6 feet per ANSI Z359.11.\u003c\/p\u003e\n\u003ch4\u003eWork Positioning\u003c\/h4\u003e\n\u003cp\u003eConnect a positioning lanyard to the two side hip D-rings to support the worker at a fixed position on structure. Work positioning systems must be rigged so that free fall is limited to 2 feet or less, and a backup fall arrest system must always be used in conjunction.\u003c\/p\u003e\n\u003ch4\u003eLadder Climbing\u003c\/h4\u003e\n\u003cp\u003eFor fixed ladder climbing applications, the front sternal D-ring may be used for connection to a vertical cable or rail climbing sleeve system. Climbing systems must be rigged so that free fall is limited to 18 inches or less.\u003c\/p\u003e\n\u003ch4\u003eControlled Descent \/ Rope Access\u003c\/h4\u003e\n\u003cp\u003eThe ventral front D-ring supports connection to a descender or evacuation system for controlled descent applications, consistent with Class D harness use as defined in the instruction manual.\u003c\/p\u003e\n\u003ch4\u003eRestraint Systems\u003c\/h4\u003e\n\u003cp\u003eThe harness can be used as a component of a restraint system to prevent a worker from reaching an unprotected edge or floor opening, using a lanyard or restraint line connected to an appropriate anchorage.\u003c\/p\u003e\n\u003ch3\u003eCompatible Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete structures and elevated decks\u003c\/li\u003e\n\u003cli\u003eSteel framing and structural ironwork\u003c\/li\u003e\n\u003cli\u003eFixed ladders and climbing structures\u003c\/li\u003e\n\u003cli\u003eScaffolding and elevated platforms\u003c\/li\u003e\n\u003cli\u003eRope access and controlled descent systems\u003c\/li\u003e\n\u003cli\u003eConfined space entry and egress (with appropriate rescue configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Documents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/PS-Tech-H22312162-240507.pdf?v=1787156940\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/PS-Manual-Harnesses-221103_f9810dc7-18e8-4daf-a036-fcafaaea5f21.pdf?v=1787156940\" rel=\"noopener\" target=\"_blank\"\u003eDownload Instruction Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/PS-Harness-Sizing-Chart_6e0428a9-59a0-4e28-a857-a3ad2f93abca.pdf?v=1787156939\" rel=\"noopener\" target=\"_blank\"\u003eDownload Harness Sizing Chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/Dec-of-Conf-H22312162.pdf?v=1787156939\" rel=\"noopener\" target=\"_blank\"\u003eDownload Declaration of Conformance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/PS-Manual-SRL170-Guide-SinglePg-Color-230906_29c29769-9d74-4c9b-b7e6-f6428054d3eb.pdf?v=1787156939\" rel=\"noopener\" target=\"_blank\"\u003eSRL170 Dual Leg SRD Converter Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003ePre-Use Inspection\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eInspect all webbing for cuts, fraying, burns, chemical damage, or unusual wear before each use.\u003c\/li\u003e\n\u003cli\u003eInspect all hardware (buckles, D-rings, back plate) for deformation, corrosion, or damage.\u003c\/li\u003e\n\u003cli\u003eInspect all stitching for broken or pulled threads.\u003c\/li\u003e\n\u003cli\u003eRemove the harness from service immediately if any defect is found or if the harness has been subjected to a fall arrest event.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDonning the Harness\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eHold the harness by the dorsal D-ring and allow it to hang freely to identify all straps.\u003c\/li\u003e\n\u003cli\u003eSlip the shoulder straps over each shoulder so the dorsal D-ring is centered between the shoulder blades.\u003c\/li\u003e\n\u003cli\u003eConnect and adjust the chest strap at mid-sternum level.\u003c\/li\u003e\n\u003cli\u003eConnect the quick-connect leg strap buckles and pull each strap snug — straps should be snug but allow a flat hand to pass underneath.\u003c\/li\u003e\n\u003cli\u003eAdjust the torso\/waist adjustment points for a secure, snug fit.\u003c\/li\u003e\n\u003cli\u003eAdjust shoulder straps so the dorsal D-ring sits between the shoulder blades.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eMaking Connections\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eUse only self-locking connectors with this harness.\u003c\/li\u003e\n\u003cli\u003eFor fall arrest, connect the subsystem (lanyard or SRL) to the dorsal D-ring only.\u003c\/li\u003e\n\u003cli\u003eFor work positioning, connect the positioning lanyard to the side hip D-rings only — never use side D-rings for fall arrest.\u003c\/li\u003e\n\u003cli\u003eFor climbing, connect the climbing sleeve to the front sternal D-ring.\u003c\/li\u003e\n\u003cli\u003eEnsure all connectors are fully closed and locked before use. Visually inspect each connection.\u003c\/li\u003e\n\u003cli\u003eDo not connect two active components (snap hooks or carabiners) to a single D-ring simultaneously.\u003c\/li\u003e\n\u003cli\u003eStore the unused leg of a Y-lanyard in the integrated lanyard keeper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePost-Use \/ After a Fall\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove the harness from service immediately if it has been subjected to fall arrest forces.\u003c\/li\u003e\n\u003cli\u003eContact Palmer Safety or your distributor regarding replacement policies for components involved in a fall.\u003c\/li\u003e\n\u003cli\u003eDo not attempt to repair the harness in the field — repairs must be performed only by the manufacturer or entities authorized in writing by the manufacturer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety Data Summary\u003c\/h3\u003e\n\u003ch4\u003eHazard Information\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEquipment subjected to a fall arrest event must be immediately removed from service — continued use after a fall may result in serious injury or death.\u003c\/li\u003e\n\u003cli\u003eDo not use around moving machinery or electrical hazards.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with sharp edges and abrasive surfaces that may damage webbing.\u003c\/li\u003e\n\u003cli\u003eDo not expose webbing or synthetic components to slag, hot sparks, open flames, or other heat sources.\u003c\/li\u003e\n\u003cli\u003eDo not expose equipment to UV light beyond normal use — UV degradation weakens synthetic webbing over time.\u003c\/li\u003e\n\u003cli\u003eDo not expose to chemicals, caustic environments, or high levels of organic acids or bases without confirming compatibility with Palmer Safety.\u003c\/li\u003e\n\u003cli\u003eSwing falls — where the anchorage is not directly above the fall point — significantly increase fall clearance requirements and risk of striking an object; minimize by working as close to the anchorage as possible.\u003c\/li\u003e\n\u003cli\u003eExtended suspension in a full body harness is not intended for prolonged periods — have a rescue plan in place before beginning work.\u003c\/li\u003e\n\u003cli\u003ePregnant women and minors should not use this equipment.\u003c\/li\u003e\n\u003cli\u003eConsult a physician if there is any reason to doubt a user's ability to safely withstand fall arrest forces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePersonal Protective Equipment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUse in conjunction with a complete personal fall arrest system including a compatible anchorage, connecting subsystem, and self-locking connectors.\u003c\/li\u003e\n\u003cli\u003eAdditional PPE appropriate to the work environment (hard hat, gloves, eye protection) should be worn as required by site conditions.\u003c\/li\u003e\n\u003cli\u003eHeat-resistant materials are recommended when working near heat sources that could damage synthetic webbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSafe Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the harness before each use and have it inspected by a qualified person on a regular basis.\u003c\/li\u003e\n\u003cli\u003eDo not alter the equipment in any way.\u003c\/li\u003e\n\u003cli\u003eStore away from UV light, chemicals, heat sources, and sharp objects when not in use.\u003c\/li\u003e\n\u003cli\u003eDo not use natural fiber materials (manila, cotton) as part of the fall protection system.\u003c\/li\u003e\n\u003cli\u003eEnsure all components in the system are rated for the application and are compatible with each other before use.\u003c\/li\u003e\n\u003cli\u003eHave a rescue plan and the means to implement it before beginning work at height.\u003c\/li\u003e\n\u003cli\u003eNever use fall protection equipment for towing or hoisting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What D-rings are approved for fall arrest on this harness?\u003c\/strong\u003e\u003cbr\u003eA: Only the dorsal (back) D-ring, located between the shoulder blades, is approved for fall arrest. The side hip D-rings are for work positioning only, and the front D-rings are for climbing and rope access\/ventral applications respectively. Never connect a fall arrest subsystem to the side or front D-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this harness be used after a fall arrest event?\u003c\/strong\u003e\u003cbr\u003eA: No. Any harness subjected to the forces of a fall arrest must be immediately removed from service. Contact Palmer Safety or your distributor regarding their replacement policy for components involved in a fall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the maximum free fall distance allowed with this harness?\u003c\/strong\u003e\u003cbr\u003eA: For personal fall arrest systems, the system must be rigged to limit free fall to 6 feet (1.8 m) per ANSI Z359.11. Work positioning systems must limit free fall to 2 feet (0.6 m) or less. Climbing systems must limit free fall to 18 inches (0.46 m) or less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What sizes are available and what are the part numbers?\u003c\/strong\u003e\u003cbr\u003eA: The harness is available in two size ranges: Small\/Medium (Part No. H22312162.S\/M) and Large\/X-Large (Part No. H22312162.L\/XL). Refer to the Palmer Safety Harness Sizing Chart (available for download above) to determine the correct size for your measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are repairs or modifications permitted in the field?\u003c\/strong\u003e\u003cbr\u003eA: No. The harness must not be altered in any way. Repairs must be performed only by Palmer Safety or entities authorized in writing by the manufacturer. Any harness exhibiting deformities, unusual wear, or deterioration must be immediately discarded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What standards does this harness meet?\u003c\/strong\u003e\u003cbr\u003eA: The Akula™ Series H22312162 meets or exceeds ANSI Z359.11-2021 and A10.32-2012.\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Small – Medium","offer_id":48923260518574,"sku":"H22312162.S\/M","price":420.0,"currency_code":"USD","in_stock":true},{"title":"Large – X-Large","offer_id":48923260551342,"sku":"H22312162.L\/XL","price":4200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/H22312162-new-front.jpg?v=1787156945","url":"https:\/\/www.diamondtoolstore.com\/products\/akula%e2%84%a2-series-harness-5pt-padded-back-legs-qcb-positioning-belt-side-d-rings-back-and-dual-front-d-rings-black","provider":"Diamond Tool Store","version":"1.0","type":"link"}