{"product_id":"alus-double-triple-quad-hangers","title":"ALUS Double, Triple, Quad Hangers - Box of 250","description":"\u003ch2\u003eALUS Double, Triple, Quad Hangers — Custom-Die Designed for Maximum Load Value\u003c\/h2\u003e\n\u003cp\u003eThe ALUS series joist hangers are custom-die designed and manufactured by Tamlyn for quick installation and maximum allowable load performance. Constructed from 18-gauge galvanized steel, these hangers are available in G-185 Triple Zinc or Hot-Dip Galvanized finishes to suit corrosion-resistance requirements on the jobsite. Designed for use with wood or structural composite lumber having an effective specific gravity of 0.55 or greater — such as Southern Pine — the ALUS series carries both FL and ICC code approvals, making them suitable for regulated residential and commercial framing applications. Contractors working on double, triple, or quad joist assemblies will find these hangers engineered to deliver reliable gravity and uplift load performance across standard load duration conditions.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e18ga. galvanized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish Options\u003c\/td\u003e\n\u003ctd\u003eG-185 Triple Zinc or Hot-Dip Galvanized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL Approval\u003c\/td\u003e\n\u003ctd\u003e#8283\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eICC Approval\u003c\/td\u003e\n\u003ctd\u003eESR-1347, ER-2556\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumber Specific Gravity Requirement\u003c\/td\u003e\n\u003ctd\u003e0.55 or greater (e.g. Southern Pine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAllowable Uplift Load Duration Factor (C\u003csub\u003eD\u003c\/sub\u003e)\u003c\/td\u003e\n\u003ctd\u003e1.6 (160%) — corresponding to wind and earthquake load duration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAllowable Gravity Load Duration Factor C\u003csub\u003eD\u003c\/sub\u003e = 1.0\u003c\/td\u003e\n\u003ctd\u003e100% — occupancy live loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAllowable Gravity Load Duration Factor C\u003csub\u003eD\u003c\/sub\u003e = 1.15\u003c\/td\u003e\n\u003ctd\u003e115% — snow loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAllowable Gravity Load Duration Factor C\u003csub\u003eD\u003c\/sub\u003e = 1.25\u003c\/td\u003e\n\u003ctd\u003e125% — construction loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAvailable Sizes (Example SKU: ALUS26-2)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eItem ID\u003c\/th\u003e\n\u003cth\u003eHeight (H)\u003c\/th\u003e\n\u003cth\u003eWidth (W)\u003c\/th\u003e\n\u003cth\u003eBearing Depth (B)\u003c\/th\u003e\n\u003cth\u003eSteel Gage\u003c\/th\u003e\n\u003cth\u003eNail Schedule – Joist\u003c\/th\u003e\n\u003cth\u003eNail Schedule – Header\u003c\/th\u003e\n\u003cth\u003eAllowable Load C\u003csub\u003eD\u003c\/sub\u003e=1.0\u003c\/th\u003e\n\u003cth\u003eAllowable Load C\u003csub\u003eD\u003c\/sub\u003e=1.15\u003c\/th\u003e\n\u003cth\u003eAllowable Load C\u003csub\u003eD\u003c\/sub\u003e=1.25\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eALUS26-2\u003c\/td\u003e\n\u003ctd\u003e6-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e3-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e935 LBF\u003c\/td\u003e\n\u003ctd\u003e935 LBF\u003c\/td\u003e\n\u003ctd\u003e935 LBF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eUnlike generic off-the-shelf joist hangers, the ALUS series is custom-die designed by Tamlyn specifically to optimize both installation speed and load capacity. The dual finish options — G-185 Triple Zinc and Hot-Dip Galvanized — give contractors the flexibility to match corrosion-protection requirements for different exposure conditions, and the dual ICC and FL code approvals simplify the inspection and permitting process on regulated projects.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003ch4\u003eCustom-Die Design for Quick Installation\u003c\/h4\u003e\n\u003cp\u003eTamlyn engineered the ALUS hangers with a custom die to streamline field installation. Faster hanger placement reduces labor time on multi-joist assemblies, keeping framing crews on schedule.\u003c\/p\u003e\n\u003ch4\u003e18-Gauge Galvanized Steel Construction\u003c\/h4\u003e\n\u003cp\u003eThe 18-gauge steel provides the structural rigidity needed to achieve rated allowable loads in double, triple, and quad joist configurations. Galvanized construction protects against corrosion in typical framing environments.\u003c\/p\u003e\n\u003ch4\u003eDual Finish Availability — G-185 Triple Zinc or Hot-Dip Galvanized\u003c\/h4\u003e\n\u003cp\u003eContractors can specify the appropriate corrosion-resistance level for the project's exposure conditions. Hot-Dip Galvanized is available for applications requiring a heavier zinc coating; call for availability on specific finishes.\u003c\/p\u003e\n\u003ch4\u003eFL and ICC Code Approvals\u003c\/h4\u003e\n\u003cp\u003eThe ALUS series carries FL Approval #8283 and ICC approvals ESR-1347 and ER-2556, providing the documentation needed to satisfy inspectors and meet code requirements on permitted projects without additional engineering submittals.\u003c\/p\u003e\n\u003ch4\u003eLoad Duration Factor Flexibility\u003c\/h4\u003e\n\u003cp\u003eAllowable gravity loads are rated at three load duration factors — C\u003csub\u003eD\u003c\/sub\u003e = 1.0, 1.15, and 1.25 — covering occupancy live loads, snow loads, and construction loads respectively. Uplift loads are adjusted at C\u003csub\u003eD\u003c\/sub\u003e = 1.6 for wind and seismic conditions, giving engineers and contractors the data needed for accurate load calculations without further increases permitted.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003ch4\u003eDouble Joist Framing\u003c\/h4\u003e\n\u003cp\u003eThe ALUS series is designed for double joist assemblies where increased load capacity is required at beam-to-header connections in floor and roof framing.\u003c\/p\u003e\n\u003ch4\u003eTriple Joist Assemblies\u003c\/h4\u003e\n\u003cp\u003eUsed where triple joist members are specified to carry concentrated loads, such as at stair openings, large floor openings, or heavily loaded beam points.\u003c\/p\u003e\n\u003ch4\u003eQuad Joist Connections\u003c\/h4\u003e\n\u003cp\u003eSupports quad joist configurations in high-load framing situations, providing a code-approved connection at the header without custom fabrication.\u003c\/p\u003e\n\u003ch4\u003eSouthern Pine and High-Specific-Gravity Lumber Framing\u003c\/h4\u003e\n\u003cp\u003eRated for use with wood or structural composite lumber having an effective specific gravity of 0.55 or greater, making these hangers well-suited for Southern Pine framing common in southeastern U.S. construction.\u003c\/p\u003e\n\u003ch3\u003eProduct Documents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/ALUS.pdf?v=1793992493\" target=\"_blank\" rel=\"noopener\"\u003eALUS Catalog Page (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/TAMLYN-Credit-Application_03101e35-20fc-453f-b999-65c21189feb7.pdf?v=1793992493\" target=\"_blank\" rel=\"noopener\"\u003eCredit Application\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What lumber types are compatible with the ALUS hangers?\u003c\/strong\u003e\u003cbr\u003eA: The ALUS hangers are rated for use with wood or structural composite lumber having an effective specific gravity of 0.55 or greater, such as Southern Pine. They are not rated for use with lower-density lumber species that fall below this specific gravity threshold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What code approvals does the ALUS series carry?\u003c\/strong\u003e\u003cbr\u003eA: The ALUS series holds FL Approval #8283 and ICC approvals ESR-1347 and ER-2556, supporting use on code-regulated residential and commercial projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What finish options are available, and how do I order a specific finish?\u003c\/strong\u003e\u003cbr\u003eA: The ALUS hangers are available in G-185 Triple Zinc or Hot-Dip Galvanized finishes. Availability varies by finish — contact Tamlyn directly to confirm which finish is in stock for your order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the allowable gravity loads for the ALUS26-2 at different load durations?\u003c\/strong\u003e\u003cbr\u003eA: For the ALUS26-2, the allowable joist load is 935 LBF at all three load duration factors: C\u003csub\u003eD\u003c\/sub\u003e = 1.0 (occupancy live loads), C\u003csub\u003eD\u003c\/sub\u003e = 1.15 (snow loads), and C\u003csub\u003eD\u003c\/sub\u003e = 1.25 (construction loads). No further increases in allowable loads are permitted beyond these values.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many nails are required to achieve the rated load on the ALUS26-2?\u003c\/strong\u003e\u003cbr\u003eA: The ALUS26-2 nail schedule requires 4 nails into the joist and 8 nails into the header to achieve the rated allowable loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What gauge steel are these hangers made from?\u003c\/strong\u003e\u003cbr\u003eA: The ALUS hangers are manufactured from 18-gauge galvanized steel.\u003c\/p\u003e","brand":"Tamlyn","offers":[{"title":"3-1\/8\" × 5-1\/2\" - Double Hanger \/ Standard Galvanized","offer_id":67976732246190,"sku":"ALUS26-2","price":455.42,"currency_code":"USD","in_stock":true},{"title":"3-1\/8\" × 5-1\/2\" - Double Hanger \/ Galvanized with Heavy Zinc","offer_id":67976732278958,"sku":"ALUS26-2Z","price":504.08,"currency_code":"USD","in_stock":true},{"title":"3-1\/8\" × 7-1\/4\" - Double Hanger \/ Standard Galvanized","offer_id":67976732311726,"sku":"ALUS28-2","price":501.92,"currency_code":"USD","in_stock":true},{"title":"3-1\/8\" × 7-1\/4\" - Double Hanger \/ Galvanized with Heavy Zinc","offer_id":67976732344494,"sku":"ALUS28-2Z","price":825.17,"currency_code":"USD","in_stock":true},{"title":"3-1\/8\" × 8-1\/2\" - Double Hanger \/ Standard Galvanized","offer_id":67976732377262,"sku":"ALUS210-2","price":544.58,"currency_code":"USD","in_stock":true},{"title":"3-1\/8\" × 8-1\/2\" - Double Hanger \/ Galvanized with Heavy Zinc","offer_id":67976732410030,"sku":"ALUS210-2Z","price":412.58,"currency_code":"USD","in_stock":true},{"title":"4-1\/2\" × 6-1\/4\" - Triple Hanger \/ Standard Galvanized","offer_id":67976732442798,"sku":"ALUS28-3","price":1616.67,"currency_code":"USD","in_stock":true},{"title":"4-1\/2\" × 7-3\/4\" - Triple Hanger \/ Standard Galvanized","offer_id":67976732475566,"sku":"ALUS210-3","price":1666.67,"currency_code":"USD","in_stock":true},{"title":"3-1\/2\" × 8-3\/4\" - Single Hanger \/ Standard Galvanized","offer_id":67976732508334,"sku":"ALUS410","price":1225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8396\/6382\/files\/1516454a-10b1-44d4-a0af-0ae9c4cd030e.png?v=1793995286","url":"https:\/\/www.diamondtoolstore.com\/products\/alus-double-triple-quad-hangers","provider":"Diamond Tool Store","version":"1.0","type":"link"}