Atlas Bridge Saw is built and designed in America for precise cutting of granite and stone slabs
Entire steel frame is Double Hot Dip Galvanized. The outside AND inside of all round and rectangular tubing is Galvanized for maximum protection against rust.
Increase your output with this reliable, top-quality, Made-in-America Bridge Saw - the best combination of performance and price available anywhere! Atlas Bridge Saw is a machine used to cut granite, marble, quartzite, engineered stone, natural stone, and other types of slabs. The bridge saw is an American made saw that is the top of the line, coming stocked with 20 horse power, six stopping points, hyrdraulic tilt table, and many more features all while being aggressively priced. This granite cutting machine is an excellent choice for any stone fabrication shop.
Bridge Saw and Table can be custom made to fit your fabrication shop
>> Overall dimensions: 18’ wide x 16’ deep x 8’ tall
>> Cut length: 145"
>> Main motor assembly: 20 HP, 220V, 3 phase
>> Powered Tilt Table easily loads stone; locks at any position; gives operator complete control.
>> Runs at 1750 rpm; powered with variable speed direct drive movement.
>> Optional Variable Frequency Drive (VFD) automatically adjusts blade speed to stone density for optimal, clean, chip-free cuts - range 600 RPM to 4,500 RPM.
>> High-Intensity Laser Guided Blade Alignment.
>> Precise, Fast Cuts - 15 feet per minute - without complicated controls.
>> Operates via Machine Mounted Control Box with Diagnostic Screens AND Wireless Remote Control.
>> Solid hardened stainless-steel linear rail system, bolted to 6" x 10” bridge rail.
>> Motor assembly has 12” powered vertical movement range with adjustable limit switches.
>> Saw can use 14", 16", 18" and 20” diameter blades.
>> Heavy Duty rotating 6' x 12' turntable includes hydraulic tilting and positive stop settings at 0, -45, 45, -90, 90, and 180 degrees - can be locked in any position.
>> Frame tubing welded completely shut to eliminate water penetration.
>> Every exposed steel part is epoxy enamel painted for maximum rust protection.
>> Manual switch water solenoid saves on water consumption.
>> Accurate, clean Miter Cuts up to 50 degrees - entire beam tilts for Plunge-Cut Mitering (not saw motor assembly tilt only, as on other saws).
>> Our Professional Install Team will mill the concrete table top, after concrete is poured (no other Bridge Saw company provides this service with installation).