Concrete Repair

  • Model: 500-0005
  • Manufactured by: HP Spartacote

Concrete Repair :

Quantity :

Ask a question

SPARTACOTE® FAST FIX™ Concrete Crack Repair-Concrete Crack Filler


SPARTACOTE® FAST FIX™ is a 2 component, fast setting concrete repair material

SPARTACOTE® FAST FIX™ is a fast setting, two-component hybrid urethane concrete repair material. Ultra-low viscosity properties allow for deep penetration into concrete and a thorough wetting of selected aggregate to form a high-strength permanent concrete repair. Material exotherms throughout repair and can be ground smooth in 15 minutes. SPARTACOTE® FAST FIX™ exhibits a rigorous inter-coat bond with SPARTACOTE® concrete coating systems.

SPARTACOTE® FAST FIX™ may be applied neat or mixed with dry kiln sand to create a slurry mixture, which can then be used to fill in cracks and other areas. As the material dries, it expands vertically and horizontally, which allows for a smooth, feathered edge finish once properly ground. 

Extremely easy to work with a compressive strength of over 4200 PSI. 

For more information regarding specific systems or to discuss your next project, please contact us today.

SPARTACOTE® FAST FIX™ Concrete Repair Features and Benefits

  • Feather edge repairs – no square cutting required
  • Minimal prep and downtime
  • Meets USDA requirements
  • Rapid application & Set Times
  • Cold application to -35º F
  • Excellent abrasion resistance
  • High impact resistance
  • Medium Grey Color


  • Auto Dealerships
  • Grocery Stores
  • Residential garages and basements
  • SPARTACOTE® FAST FIX™, when combined with aggregate, can be used for patching spalls and repairing joints/large cracks in concrete.
  • Can be used neat for hairline cracks or nail holes. May also be employed as an anchoring mortar.


Material Properties
Type: 2 -Component Urethane Repair
Percent Solids by Weight: 98%
Shelf Life: 12 months
Pot Life: 4-5 minutes
Tack-Free: 10 Minutes
Full Traffic: 20 Minutes
Compressive Strength (with sand): > 4,250 PSI
Bond Strength (ASTM 882-99): > 1500 psi
Tensile Strength (ASTM D412): > 4000 psi
Coverage: 1 gal w/sand: 750 cubic inches
Mixing Ratio: 1:1 by volume
Color: Concrete Grey


Dia Plus Free Maxima