Multiquip’s High Frequency Inverter Concrete Vibrators allow the operator to change output frequency according to the slump conditions.

Customers report  greater productivity with far less operator strain.

The FU162A High Frequency Inverter has a push switch that changes the output frequency to the vibrator head, allowing the operator to keep up with the changing conditions of the concrete mix. Conventional concrete vibrators do not have the option to change motor RPM and frequency.

  • Soft Start mode allows smooth starts even under load.
  • Inverter powers up to two concrete vibrators with four head size options. (Powers only one FX60E6).
  • Maintains top performance in virtually any slump condition with a powerful and highly efficient motor.
  • Rugged control box with sealed electronics.
  • FU162A Controller and FX Vibrators are covered by a one year parts and labor warranty. Contact Multiquip for complete warranty information

Please Note: FU162A Controller powers any TWO* of these vibrators:
FX30E6 (1.25") • FX40G6 (1.7")
FX50G6 (2") • FX60E6 (2.4")
* Only ONE FX60E6 can be powered at 18 Amps.

NOTE: The FU162 and FX concrete vibrator series is not compatible with other past or present MQ Mikasa high cycle vibrator series. Not compatible with Micon or FXA series products.

 
Unit Specifications
Receptacles 2
Weight 19.1 lb 8.7 kg

 

Input Power

Voltage 100-120/220-240
Phase Single
Amps 20-16/14-10.5
Frequency 50/60 Hz

 

Output Power

Voltage 48
Phase Three
Amps 19.2
Frequency 100-240 Hz
Notice: Features and equipment specifications are subject to change without notice.