ANE-TOP-POLY-100 - Polyaspartic Floor Kit 100% – 2 Gallon

ANE-TOP-POLY-100 Coating is a polyaspartic coating used on decorative concrete.

Coverage: For flake floors, 400 sq ft. per 2-gallon kit. For metallic floors, 150 sq ft per 2-gallon kit.

Part #: ANE-TOP-POLY-100: 100% SOLIDS, V.O.C. COMPLIANT, UV AND SOLVENT RESISTANCE TOPCOAT (2 GALLON)

ANE Poly 80 is also available

Safety Data Sheets

SDS - A

SDS - B

100% Solids Polyaspartic Floor Coating for Professional Flooring Systems

The A.N.E. TOP-POLY-100 Polyaspartic Floor Kit is a professional-grade, two-component, 100% solids aliphatic polyaspartic floor coating designed for durable, UV-resistant topcoat applications. Built for residential, commercial, and industrial flooring systems, this 2-gallon kit delivers excellent appearance along with strong resistance to chemicals, solvents, abrasion, weather exposure, and UV light.

A.N.E. TOP-POLY-100 is formulated for contractors who need a high-performance clear or pigmented floor coating with an extended working time, strong adhesion, and excellent gloss retention. The coating can be used with decorative flake systems, metallic flooring, pigments, and other compatible decorative flooring materials.

Whether you're installing a garage floor coating, commercial epoxy floor, decorative flake system, metallic floor, workshop floor, or other protective concrete coating, A.N.E. TOP-POLY-100 provides the durability and professional finish required for demanding flooring applications.

Why Choose A.N.E. TOP-POLY-100?

Polyaspartic coatings are commonly selected where contractors need fast curing performance, UV stability, abrasion resistance, and long-term protection.

A.N.E. TOP-POLY-100 combines these characteristics with a 100% solids formulation and 1:1 mixing ratio, making it a practical choice for professional coating installers.

Key benefits include:

• 100% solids formulation

• Two-component aliphatic polyaspartic

• UV-resistant topcoat

• Excellent chemical resistance

• Excellent solvent resistance

• Excellent abrasion resistance

• Good weather resistance

• Non-yellowing performance

• Good gloss retention

• Strong adhesion

• Extended working time

• Rapid cure characteristics

• Simple 1:1 mix ratio by volume

• Low odor during application

• VOC compliant

• Suitable for residential, commercial, and industrial flooring

• Compatible with decorative pigments and flooring systems

According to A.N.E. Coatings, TOP-POLY-100 is also VOC compliant throughout the United States and Canada.

Ideal for Decorative Flake Floors

A.N.E. TOP-POLY-100 is an excellent option for decorative flake flooring systems, where a durable clear topcoat is needed to protect the broadcast flakes while producing an attractive finished surface.

The manufacturer lists coverage of approximately:

400 square feet per 2-gallon kit for flake floors.

Common flake floor applications include:

• Garage floors

• Workshops

• Basements

• Retail floors

• Commercial facilities

• Showrooms

• Service areas

• Utility rooms

• Warehouses

• Residential concrete floors

A high-quality polyaspartic topcoat helps encapsulate decorative flakes while protecting the floor from abrasion, chemicals, moisture, and everyday traffic.

Excellent Choice for Metallic Flooring

TOP-POLY-100 can also be incorporated into decorative metallic flooring systems.

A.N.E. Coatings lists coverage of approximately:

150 square feet per 2-gallon kit for metallic floors.

The product can be colored or combined with compatible liquid or powder pigments, giving flooring contractors flexibility when creating decorative flooring designs.

Metallic flooring is commonly used in:

• Showrooms

• Restaurants

• Retail stores

• Offices

• Salons

• Residential interiors

• Entertainment spaces

• Commercial facilities

• Decorative concrete applications

UV-Resistant Polyaspartic Topcoat

One of the major advantages of an aliphatic polyaspartic coating is improved resistance to UV exposure compared with many traditional epoxy coatings.

A.N.E. TOP-POLY-100 is specifically formulated as a UV-resistant floor topcoat and provides non-yellowing performance with good gloss retention.

This makes it especially useful for flooring systems where sunlight or UV exposure may be a concern.

Potential applications include:

• Garages

• Entryways

• Commercial spaces

• Workshops

• Warehouses

• Showrooms

• Covered exterior environments where appropriate

• Areas exposed to sunlight through doors or windows

Always follow the manufacturer's technical requirements when evaluating the coating for a particular environment.

Excellent Chemical and Solvent Resistance

Industrial and commercial floors are frequently exposed to cleaners, oils, chemicals, solvents, and other substances that can damage lower-performance coatings.

A.N.E. TOP-POLY-100 is engineered to provide superior chemical and solvent resistance, making it suitable for demanding commercial and industrial applications.

The manufacturer's listed primary applications include:

• Aircraft hangar floors

• Maintenance facilities

• Industrial workshop floors

• Car washes and wash bays

• Secondary containment

• Offshore platforms

• Cooling towers

• Bridges

• Wastewater treatment applications

• Marine protection for concrete, fiberglass, steel, and wood

Abrasion and Wear Resistance

Floor coatings in garages, warehouses, workshops, and industrial facilities must withstand repeated foot traffic, wheeled equipment, carts, machinery, and general wear.

TOP-POLY-100 provides excellent weather and abrasion resistance, helping maintain the appearance and protective properties of the finished floor under demanding conditions.

This makes the coating well suited for:

• Garage floors

• Automotive shops

• Manufacturing facilities

• Warehouses

• Maintenance areas

• Commercial floors

• Equipment rooms

• Service facilities

• Industrial shops

Long Working Time

Many fast-curing coating systems can be challenging to install because installers have limited time to mix, pour, spread, and back-roll the product.

A.N.E. TOP-POLY-100 is designed as a long-working-time polyaspartic, providing installers additional time to properly apply and finish the coating.

The manufacturer's technical data lists a pot life of approximately 40–50 minutes at 25°C / 77°F for the tested quantity.

Actual working and curing times can vary based on temperature, humidity, batch size, substrate temperature, and jobsite conditions.

Easy 1:1 Mixing Ratio

A.N.E. TOP-POLY-100 uses a straightforward 1:1 mix ratio by volume.

The manufacturer's technical data specifies:

• Component A : Component B = 1:1 by volume

• 100:107 by weight

• Two-component coating system

A simple mix ratio can make measuring and batching easier for professional installers working on larger flooring projects.

For proper mixing, A.N.E. recommends mixing the individual components before combining them, then blending Parts A and B with a low-speed drill and paddle mixer.

Concrete Surface Preparation

Proper surface preparation is essential for the performance of any professional floor coating system.

For existing concrete, A.N.E. recommends mechanical preparation methods such as:

• Diamond grinding

• Shot blasting

• Sandblasting

Oil, grease, curing compounds, sealers, waxes, and other contaminants should be completely removed before coating. The manufacturer also specifies that the coating should not be applied to wet substrates.

Diamond grinding is a popular preparation method because it removes weak surface material while creating a mechanical profile that helps the coating bond to the concrete.

New Concrete Requirements

New concrete should be properly cured and prepared before installing the coating.

A.N.E. specifies that new concrete should cure for at least 30 days before application. The manufacturer also recommends mechanical preparation to remove laitance created during concrete placement and finishing.

Cracks, spalls, holes, and other imperfections should be repaired before applying the coating system.

Primer Recommendations

A.N.E. strongly recommends the use of ANE-CLEAR-3 primer before applying TOP-POLY-100 over concrete.

Priming can help:

• Seal porous concrete

• Improve coating adhesion

• Reduce outgassing

• Create a more uniform substrate

• Improve overall coating-system performance

Porous concrete may require additional primer depending on surface conditions.

Application Method

After the surface has been properly prepared and the two components mixed, A.N.E. recommends applying the material as a thin, uniform layer using a rubber squeegee followed by a roller to create an even finish. Puddling should be avoided.

Typical application tools may include:

• Mixing drill

• Mixing paddle

• Measuring containers

• Rubber squeegee

• Floor coating roller

• Extension pole

• Spiked shoes

• Appropriate personal protective equipment

Always follow the current technical and safety data sheets before installation.

Application Conditions

Jobsite conditions can significantly affect coating performance.

A.N.E. lists the following application restrictions:

• Minimum substrate temperature: 59°F / 15°C

• Maximum substrate temperature: 86°F / 30°C

• Maximum relative humidity: 85%

• Substrate moisture content below 4%

• Protect the coating from humidity, condensation, and water during the first 24 hours of cure

Checking substrate moisture, ambient temperature, humidity, and floor temperature before installation helps prevent coating failures.

2-Gallon Professional Floor Coating Kit

A.N.E. TOP-POLY-100 is available as a 2 U.S. gallon kit, making it suitable for residential garages, commercial flooring jobs, decorative concrete projects, and other professional installations.

The convenient kit size allows contractors to calculate the number of kits needed according to the flooring system being installed.

Manufacturer-listed coverage:

• Flake floor systems: approximately 400 sq. ft. per 2-gallon kit

• Metallic floor systems: approximately 150 sq. ft. per 2-gallon kit

Actual coverage can vary depending on substrate porosity, application thickness, aggregate broadcast, texture, installation technique, and project conditions.

Common Applications

A.N.E. TOP-POLY-100 is suitable for a wide variety of coating applications, including:

• Garage floor coatings

• Decorative flake floors

• Metallic floors

• Epoxy flooring systems

• Commercial flooring

• Industrial flooring

• Automotive shops

• Warehouses

• Workshops

• Aircraft hangars

• Maintenance facilities

• Car washes

• Wash bays

• Manufacturing facilities

• Secondary containment areas

• Marine environments

• Concrete protection systems

Polyaspartic vs. Epoxy Topcoats

Epoxy coatings remain popular for primers, build coats, and decorative flooring systems, but aliphatic polyaspartic coatings are often selected as the final wear coat when increased UV stability, chemical resistance, abrasion resistance, and gloss retention are desired.

A typical professional flooring system may combine several different coating technologies, such as:

• Epoxy primer

• Epoxy or polyaspartic base coat

• Decorative flake or metallic system

• Polyaspartic clear topcoat

TOP-POLY-100 can serve as the high-performance protective layer within compatible A.N.E. flooring systems.

Why Buy A.N.E. TOP-POLY-100 from Diamond Tool Store?

Diamond Tool Store supplies professional concrete flooring products, epoxy coatings, polyaspartic coatings, diamond tooling, floor grinders, surface preparation equipment, and installation supplies for contractors and flooring professionals.

The A.N.E. TOP-POLY-100 2-Gallon Polyaspartic Floor Kit provides contractors with a professional-grade solution for decorative, commercial, and industrial flooring systems where UV resistance, durability, chemical resistance, and long-lasting appearance are important.

Whether you're installing a garage flake floor, metallic floor, commercial coating system, or industrial protective floor, TOP-POLY-100 offers the performance needed for demanding professional installations.

Frequently Asked Questions

What is A.N.E. TOP-POLY-100?

A.N.E. TOP-POLY-100 is a two-component, 100% solids aliphatic polyaspartic coating designed primarily as a UV-resistant floor topcoat. It provides resistance to chemicals, solvents, abrasion, weather exposure, and UV light.

Is A.N.E. TOP-POLY-100 a polyaspartic coating?

Yes. The manufacturer's technical data identifies TOP-POLY-100 as a two-part aliphatic polyaspartic coating.

Is TOP-POLY-100 100% solids?

Yes. A.N.E. TOP-POLY-100 is formulated as a 100% solids coating.

How much area does a 2-gallon kit cover?

A.N.E. lists approximately 400 square feet per 2-gallon kit for flake floors and approximately 150 square feet per 2-gallon kit for metallic flooring. Actual coverage can vary according to installation conditions and coating thickness.

Is this coating UV resistant?

Yes. TOP-POLY-100 is specifically formulated as a UV-resistant floor topcoat and is described by A.N.E. as non-yellowing with good gloss retention.

Can TOP-POLY-100 be used on garage floors?

Yes. Its abrasion, chemical, solvent, and UV resistance make it well suited for properly prepared garage flooring systems when installed according to A.N.E.'s specifications.

Can this product be used over decorative floor flakes?

Yes. Decorative flake flooring is one of the primary flooring applications for TOP-POLY-100. The manufacturer lists approximately 400 square feet of coverage per 2-gallon kit for flake floors.

Can A.N.E. TOP-POLY-100 be used for metallic floors?

Yes. The coating can be combined with compatible metallic liquid or powder pigments. A.N.E. lists approximately 150 square feet of coverage per 2-gallon kit for metallic flooring applications.

What is the mixing ratio?

TOP-POLY-100 uses a 1:1 ratio of Component A to Component B by volume.

What is the pot life?

The technical data sheet lists a pot life of approximately 40–50 minutes at 25°C / 77°F under the manufacturer's test conditions.

Does the concrete need to be ground before application?

A.N.E. recommends mechanically preparing existing concrete by methods including diamond grinding, shot blasting, or sandblasting. Oils, waxes, sealers, curing compounds, grease, and other contaminants should also be removed.

How long should new concrete cure before applying TOP-POLY-100?

The manufacturer states that new concrete should cure for at least 30 days before application.

Should I use a primer?

A.N.E. strongly recommends ANE-CLEAR-3 primer before installing TOP-POLY-100 over concrete, particularly on porous substrates.

Is this product suitable for commercial and industrial floors?

Yes. The manufacturer's listed applications include industrial workshop floors, aircraft hangars, maintenance facilities, car washes, secondary containment areas, and other demanding environments.

Is A.N.E. TOP-POLY-100 VOC compliant?

Yes. A.N.E. states that TOP-POLY-100 is VOC compliant throughout all 50 U.S. states and Canada.

What is the best use for A.N.E. TOP-POLY-100?

TOP-POLY-100 is an excellent choice when a flooring system needs a durable protective topcoat with strong UV stability, chemical resistance, abrasion resistance, gloss retention, and professional appearance. It is particularly well suited for decorative flake floors, metallic floors, garage floors, commercial flooring, and industrial coating systems.