Product Description
Raptor Skid Steer Boom Arm Attachment (Boom Arm Only)
Extend your reach with the Eterra V5 Raptor Boom Arm, a side-reach mowing system for skid steers and compact track loaders. Eterra calls it the only industrial-grade side-work attachment system for skid steers. When paired with a mower head, the Raptor gives you 14 feet of horizontal reach, plus even more vertical reach through your machine's lift arms, so you can cover large areas quickly.
With full-angle rotation, the Raptor can cut flat overhead or angle deep into ditches. That makes it a strong fit for roadside mowing, ditch banks, and other hard-to-reach areas. Pair it with your choice of Eterra mower heads: the Cyclone 48" Brush Cutter for heavy-duty projects, the Sidewinder Flail Mower for efficient roadside mowing, or the Razor Sickle Bar Mower in 5, 7, or 9 ft. sizes for precise cutting of material up to 2" in diameter.
Please note: This listing is for the boom arm only. Mower heads are sold separately, and the Raptor also requires an electrical control system (see below).
What's New in the V5
- Redesigned arm: built from plate steel and modeled after an excavator arm, making it lighter yet stronger for better handling on lighter machines
- Enlarged stick lift cylinder: enables full extension and addresses previous tuning challenges
- Improved hose routing: external routing with fully wrapped hoses helps keep them cool and protects them from sharp edges
- Boom cylinder fitting guard: protects the bottom fitting from impacts to reduce the risk of breakage
- Enclosed control panel: a fully enclosed panel safeguards the electronics
- Modular controller options: the Super Controller or optional JCB-400 control box gives robust multi-function control from a single 12-volt source
Key Features
- 14 ft. horizontal reach: with a mower head attached, plus added vertical reach from your machine's lift arms
- Full-angle rotation: cut flat overhead or angle deep into ditches
- Break-away rotary actuator: protects the boom arm and mower head from accidental impacts, with a built-in bypass valve, and resets with a simple switch
- Cross-brand compatibility: the controller system lets you move the Raptor from one machine brand to another without hassle
- German-made control valve: built for reliable, long-term performance
- Case drain: a dedicated case drain line along with pressure and return lines
- Flat face couplers included: standard flat face couplers for connecting to your machine come with the unit
- Ready to work: designed to arrive ready to operate with a minimal amount of assembly
Machine Requirements
- Skid steer or compact track loader with 40 hp or more
- Lifting capacity of 2,000 lbs or more
- Hydraulic flow appropriate for your chosen mower head (see table below)
- Electrical control system: Skid Steer Genius Super Controller or JCB-400 Controller, available as a Rental Kit (short cable that moves between machines) or a Permanent Kit (long cable routed down your machine's boom)
Compatible Mower Heads
| Mower Head | Sidewinder | Cyclone 48" | 5' Sickle | 7' Sickle | 9' Sickle |
|---|---|---|---|---|---|
| Weight | 392 lb | 600 lb | 225 lb | 350 lb | 400 lb |
| Rec. Machine Flow | 19–45 GPM | 18–45 GPM | 15–20 GPM | 15–20 GPM | 15–20 GPM |
| Blade Type | 1 lb Y-Knife | 10.5 lb Forged | Top Serrated 2" | Top Serrated 2" | Top Serrated 2" |
| Blade Count | 20 | 2 | 22 | 28 | 36 |
| Cut Width | 30" | 48" | 5' | 7' | 9' |
| Rec. Application | Grass, light brush | Brush, saplings | Grass, light brush | Grass, light brush | Grass, light brush |
| Aquatic Approved | No | No | Yes | No | No |
Mower heads sold separately.
Operating Positions
- High mowing
- Low bank mowing
- Side mowing
- Front mowing / blade service
- Parked / transport position (the only position to use when moving around the job site)
Maintenance at a Glance
- Grease every pivot point daily or after every 8 hours of use: one pump of NLGI 2 grease per point
- Before each use: grease pivot points, check and fill your machine's hydraulic fluid, check cutter blades and hardware, inspect safety decals, and complete the mower head's own maintenance checks
- Weekly: inspect mower head fittings and attachment hardware; check cutter blades and hardware
- Monthly: inspect and tighten hydraulic fittings and hoses, check cutter blades and hardware, clean the attachment, and inspect the arm for damage or cracked welds
- Yearly: inspect the arm for damage or cracked welds (and immediately after any impact)
Frequently Asked Questions
Q: Does this include a mower head?
A: No. This listing is for the Raptor Boom Arm only. Choose from the Cyclone 48" Brush Cutter, the Sidewinder Flail Mower, or the Razor Sickle Bar Mower in 5, 7, or 9 ft., each sold separately.
Q: How much reach does the Raptor have?
A: With a mower head attached, it delivers 14 feet of horizontal reach. You get even more vertical reach by raising your machine's lift arms.
Q: What size machine do I need?
A: A skid steer or compact track loader with 40 hp or more and a lifting capacity of 2,000 lbs or more, with hydraulic flow suited to your chosen mower head. Don't use the Raptor on a machine that doesn't meet these requirements.
Q: How is the boom arm controlled?
A: Most machines don't have enough built-in electrical controls to run the Raptor, so it needs a secondary control system: the Skid Steer Genius Super Controller or the JCB-400 Controller. Both run off a single 12-volt source and come as a Rental Kit (a short cable you can move between machines) or a Permanent Kit (a long cable routed down your machine's boom).
Q: Can I move the Raptor between different machines?
A: Yes. The controller system works across machine brands, so you can switch from one machine to another without hassle.
Q: What hydraulic connections does it need?
A: Three hydraulic lines (pressure, return, and case drain) plus a 14-pin electrical connector that plugs into your Raptor control system, not your machine's built-in connector. Standard flat face couplers are included; non-standard couplers aren't supplied and should be sourced locally to match your machine.
Q: What happens if the arm hits something?
A: A hydraulic rotary actuator with a built-in bypass valve acts as a break-away, letting the arm swing back to protect the boom and mower head. It resets with a simple switch. Operators should still stop and adjust their positioning whenever the relief engages.
Q: What can it cut?
A: That depends on the head. The sickle bars cut material up to 2", the Sidewinder flail mower up to 4", and the Cyclone 48" is built for brush and saplings.
Q: Can I use it near power lines?
A: No. The Raptor and your machine's lift arms give you much more reach than a typical skid steer, so never lift or operate it near overhead electrical lines.
Q: How often does it need to be greased?
A: Daily or after every 8 hours of use: one pump of NLGI 2 grease at each pivot point. Mower heads have their own lubrication schedules in their manuals.
Q: Does it come assembled?
A: It's designed to arrive ready to operate with a minimal amount of assembly.
Q: Where can I find the spec sheet and manual?
A: Download the Raptor spec sheet (PDF) or download the Raptor Boom Arm user manual (PDF).

