Product Description
Eterra Auger Stump Planer
Turn your auger into a stump removal tool with the Eterra Auger Stump Planer. It's a cost-effective, high-quality attachment for jobs where full-scale stump grinding isn't warranted. Instead of outsourcing stump removal, you can get the job done quickly and reliably with your existing auger setup.
The Stump Planer has three replaceable tool steel cutting edges that can be sharpened, plus a starter tip that allows an 18" digging depth. Guides on the cutter's trailing edge keep the unit steady in the hole, and the starter tip helps push the planer through the stump to prevent overloading or jamming.
The planer fits auger drives with a 2" hex output, including Eterra 3500 and 4500 models, and any auger drive that meets the minimum torque requirement. Adapters are available for other setups. It's offered in 10" and 14" sizes.
Key Features
- Turns your auger into a stump remover: no separate stump grinder needed
- 18" digging depth: the starter tip lets the planer dig 18" deep
- Three sharpenable cutting edges: replaceable tool steel blades you can sharpen to extend their life
- Replaceable spiral pilot: the pilot and pilot blades can be replaced
- Steady in the hole: guides on the cutter's trailing edge keep the unit stable
- Prevents jamming: the starter tip pushes the planer through the stump to prevent overload
- 2" hex drive hub: fits Eterra 3500 and 4500 auger drives, with adapters available
- Two sizes: available in 10" and 14"
Specifications
| Size | 10" | 14" |
|---|---|---|
| Cutting Depth | 18" | 18" |
| Cutting Teeth | 3 tool steel sharpenable blades | 3 tool steel sharpenable blades |
| Pilot | Replaceable spiral pilot and pilot blades | Replaceable spiral pilot and pilot blades |
| Drive Hub | 2" Hex | 2" Hex Multi-Hole |
| Min. Torque Requirement | 2,200 ft-lbs | 3,300 ft-lbs |
| Weight | 60 lbs | 90 lbs |
Frequently Asked Questions
Q: What does the Stump Planer do?
A: It attaches to your auger drive and turns it into a stump removal tool, a cost-effective option for stumps where full-scale grinding isn't warranted.
Q: How deep can it dig?
A: Both sizes have an 18" digging depth, made possible by the starter tip.
Q: Will it fit my auger drive?
A: The planer fits auger drives with a 2" hex output, including Eterra 3500 and 4500 models. It also fits any unit that meets the minimum torque requirement for your size, and adapters are available for other setups. Contact us if you're not sure.
Q: How much torque does my auger need?
A: At least 2,200 ft-lbs for the 10" planer and at least 3,300 ft-lbs for the 14" planer.
Q: Which size should I choose?
A: The 10" planer requires less torque (2,200 ft-lbs) and weighs 60 lbs. The 14" planer has a wider cut, requires at least 3,300 ft-lbs of torque, and weighs 90 lbs. Choose based on the torque your auger drive delivers.
Q: Can the blades be sharpened or replaced?
A: Yes. The three tool steel cutting blades can be sharpened and replaced, and the spiral pilot and pilot blades are replaceable too.
Q: How does it keep from jamming?
A: The starter tip helps push the planer through the stump to prevent overload or jamming, and guides on the cutter's trailing edge keep the unit steady in the hole.




