VORTEX SKID STEER STUMP GRINDER ATTACHMENT
VORTEX SKID STEER STUMP GRINDER ATTACHMENT - Assembly - Mini Skid Steer Mounted - 12-20 GPM - 350-600 RPM is backordered and will ship as soon as it is back in stock.
Safe & Secure Payments
Product Description
Vortex Skid Steer Stump Grinder Attachment
Turn tree stumps into dust in no time with the Eterra Vortex Skid Steer Stump Grinder. It's engineered for operators who demand durability and performance, and it handles the toughest hardwood stumps with precision and power. An integrated drive system and a high-torque radial piston motor convert nearly 95% of your hydraulic energy into real horsepower.
The direct drive system uses an oil bath–enclosed hub, which eliminates external couplers and the hassle of constant greasing. The asymmetrical, high-strength alloy steel wheel gives you excellent visibility while grinding. It also spreads the workload evenly, extending the life of its 12 replaceable cutter teeth, rock guards, and abrasion-resistant wear plates.
Built entirely from A572 Grade 50 high-strength steel, the Vortex is designed to grind stumps down to 18 inches below ground. An elongated rubber chip guard absorbs debris impact and minimizes wood chip buildup. Because of the side-mounted design, most material exits the right side of the grinder, so very little is directed back toward the operator.
Key Features
- High-torque radial piston motor: converts nearly 95% of hydraulic energy into real horsepower
- Direct drive with oil bath hub: no external couplers and no constant greasing
- Asymmetrical alloy steel wheel: excellent visibility while grinding and an evenly distributed workload
- 12 replaceable cutter teeth: with rakers (rock guards) in front of the cutters to protect them if you hit a solid object
- Abrasion-resistant wear plates: built for long service life
- Grinds 18" below ground: takes stumps well below grade
- Elongated rubber chip guard: absorbs debris impact, minimizes chip buildup, and directs material downward and to the side
- A572 Grade 50 steel: high-strength steel construction throughout
- Fewer parts: a simple design with fewer parts than other stump grinders, so there's less to go wrong
- Ready to work: ships with hydraulic quick couplers and hoses, ready to operate out of the box
Specifications
| Model | V27 | V31 |
|---|---|---|
| Weight | 1,050 lbs | 1,075 lbs |
| Number of Teeth | 12 | 12 |
| Flow Range | 18–30 GPM | 30–45 GPM |
| Wheel Diameter | 27" | 31" |
| Max Pressure | 5,500 PSI | 5,500 PSI |
| Wheel RPM | 450–700 | 450–735 |
| Grinding Depth | 18" below ground | 18" below ground |
| Motor | High-torque radial piston | High-torque radial piston |
| Construction | A572 Grade 50 steel | A572 Grade 50 steel |
Tooth Options
The Vortex accepts several cutter tooth styles, so you can balance cutting speed against durability for your ground conditions:
- Rock Tooth: the most durable option in rocky ground
- Z Tooth: a balance of speed and durability
- Standard Tooth / Sand & Clay Tooth: the fastest cutting speed (these two cut at the same speed)
Tooth Care at a Glance
- Make sure the seat is clean before installing a tooth
- Apply anti-seize to the bolt (new teeth come with anti-seize already applied)
- Torque tooth bolts to 100 ft-lbs, and re-check them after grinding the first stump
- Replace teeth that are worn or damaged enough to wear into the holder
- If the tips of the three lead teeth are worn, they can be moved to the inner holders, where the tips aren't used
- Replace rakers when they're worn so the cutters keep maximum protection
Frequently Asked Questions
Q: Which model is right for my skid steer?
A: Choose by your machine's auxiliary hydraulic flow. The V27 runs on 18–30 GPM and the V31 on 30–45 GPM. Both are rated to 5,500 PSI. Contact us before ordering and we'll help you match the right model to your machine.
Q: What's the minimum hydraulic flow needed?
A: At least 18 GPM at 2,500 PSI. Flow or pressure that's too low will cause the grinder to stall and run slowly.
Q: How deep can it grind?
A: The Vortex is designed to grind stumps down to 18 inches below ground.
Q: Does it need regular greasing?
A: No constant greasing is needed. The direct drive system uses an oil bath–enclosed hub, which also eliminates external couplers.
Q: Does it throw material back at the operator?
A: Very little. Thanks to the side-mounted design and the rubber deflection shield, most material exits the right side of the grinder. Your machine still needs proper cab protection, and you should never operate the Vortex with the deflection shield removed.
Q: What happens if I hit a rock?
A: Rakers fitted in front of the cutters protect them from damage if you hit a solid object. Rock still damages teeth, though, so clear rock and stone from the cutting area before grinding below ground, and slow your feed rate while you're below grade.
Q: What tooth should I use?
A: For rocky ground, the Rock Tooth is the most durable option. The Z Tooth balances speed and durability. Standard and Sand & Clay teeth cut the fastest.
Q: Does it come with hydraulic hoses and couplers?
A: Yes. It ships with hydraulic quick couplers and average-length hoses, and it's ready to operate out of the box. Hose routing varies by machine, so you may need to adjust hose lengths or add a 45° or 90° fitting for your setup. The case drain line connects to your machine's case drain coupler.
Q: Can it cut through large roots?
A: Yes. The wheel is designed to "saw" into solid wood when you drop it straight down, which works well for cutting off large roots.
Q: How much clearance do I need from people?
A: Keep at least 100 yards between the stump grinder and any people, animals, or property while operating.
Q: Is there a version for mini skid steers or excavators?
A: Yes. Eterra also makes the Vortex for mini skid steers (V20) and excavators.
Q: Where can I find the spec sheet and manual?
A: Download the Vortex spec sheet (PDF) or download the stump grinder user manual (PDF).









