• Rated Excellent

    4.7/5 on Shopper Approved

  • Trusted Quality

    Serving contractors since 1994

  • Highly Recommended

    92% of customers recommend us

  • Extensive Selection

    150+ trusted industry brands

Sale

Color Enhancer & Sealer

SKU# 973

Sale price $359.82 Was: Regular price $479.75 Save $119.93
Shipping calculated at checkout.

Size
Secure Checkout
Can be applied on a damp surface and can be cooled by misting water. Avoid Blushing

Safe & Secure Payments

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

You might also be interested in

  • Dry Treat

    Dry-Treat Premium Impregnating Sealer (Stainproof Sealer)

    Regular price$89.73 – $1,534.70
    View details
  • Sale

    MB Stone Care

    Protex WB

    Sale price$70.98 – $351.98Save up to $105.02
    View details
  • Hidro SST MB Stone Care

    MB Stone Care

    Hidro SST

    Regular price $286.98
    View details
  • Hidro Protector MM - 5 Liter MB Stone Care
    Sale

    MB Stone Care

    Hidro Protector MM - 5 Liter

    Sale price $339.98 Was: Regular price $414.61 Save $74.63
    View details
  • Sale

    Dry Treat

    Dry-Treat Stain Proof Porcelain Plus Premium Porcelain and Quartz Sealer

    Sale price $80.74 Was: Regular price $99.99 Save $19.25
    View details
  • Sale

    Dry Treat

    Dry Treat Intensifia (Stainproof Color Enhancer Sealer)

    Sale price$84.23 – $308.66Save up to $36.91
    View details
  • Sale

    Dry Treat

    Dry Treat 40SK (Stain-Proof 40SK Consolidator & Water Repellent Sealer)

    Sale price$756.00 – $832.75Save up to $114.00
    View details
  • Sale

    Dry Treat

    Dense Stone Impregnating Sealer- Dry Treat- Stainproof Plus

    Sale price$60.24 – $722.84Save up to $100.00
    View details
  • B1/700 Natural-Effect, Anti-Stain Solvent Based Impregnant - Liter MB Stone Care
    Sale

    MB Stone Care

    B1/700 Natural-Effect, Anti-Stain Solvent Based Impregnant - Liter

    Sale price $85.98 Was: Regular price $104.85 Save $18.87
    View details
  • Diamond Glass Sealer/Guard for Concrete 35-DGNSII01 DGS 1 Gallon

    DGS

    Diamond Glass Sealer/Guard for Concrete

    Regular price$142.54 – $591.00
    View details
  • Sale

    Stone Pro

    Ultimate Pro Granite & Dense Stone Impregnating Sealer

    Sale price$170.00 – $6,550.00Save up to $655.00
    View details
  • Sale

    Stone Pro

    SmartKrete Densifier XL - Sale

    Sale price$129.00 – $4,998.00Save up to $499.80
    View details
  • Sale

    Stone Pro

    SmartKrete SmartGuard SP

    Sale price$95.00 – $4,300.00Save up to $430.00
    View details
  • Sale

    Stone Pro

    Aqua Pro All-Purpose Water Based Impregnating Sealer

    Sale price$120.00 – $3,800.00Save up to $380.00
    View details
  • Sale

    Stone Pro

    Pro Sealer Impregnating Sealer

    Sale price$35.00 – $4,399.00Save up to $439.90
    View details

Product Description

Shipping restriction: This item ships UPS Ground only. For expedited delivery on other products, we recommend placing a separate order.

Surface Preparation: Prior to the application of Glaze ‘N Seal products, surface must be thoroughly clean and dry. Remove all dirt, oil, grease, paint, efflorescence and surface sealers. 

General cleaning may be done using Glaze ‘N Seal Heavy Duty Cleaner for Concrete and Masonry. For efflorescence stains use Glaze ‘N Seal Efflorescence Remover. When acid has been used for any reason, surface must be neutralized. We recommend Glaze ‘N Seal Neutralizing Rinse. Read product container for specific instructions and cautions with any cleaner. Never mix cleaners. Allow at least 24 hours of drying time before sealing (48 hours if power washing has been done or if temperature is cool). New concrete pavers should cure 14 days or more before sealing. Applying sealer to a damp or incompletely cured surface may cause a hazy appearance or loss of adhesion.After tamping down the joint sand and sweeping the application area clean be sure the sand (regular or polymeric) is at least 1/8 inch below the surface of the pavers. The sand should be dry to its full depth before sealing for best results.Note: Before applying Glaze ‘N Seal products to the entire surface, test several small areas to verify the product’s appearance, penetration and protective ability.

Application Procedure: Use garden-type sprayer, low pressure airless sprayer, brush, short nap roller or squeegee for application. Apply one coat in liberal saturating manner to ensure that joints are flooded. (If sand is being sealed use a squeegee, not a roller, to remove excess sealer and avoid puddling). Allow additional drying time in moist, cool climates. An optional second coat may be applied after two hours if desired to increase protection and gloss. Re-coat as needed. For added slip resistance Glaze’ N Seal Grip ‘n Seal Slip Resistance Additive may be added to the second coat of sealer.Coverage: 75 to 150 square feet per gallon depending on porosity of surface and method of application.

Limitations: Apply in temperatures between 45°F and 90°F. Air and surface temperature should be above 45oF for 24 hours before and after sealing. Clean up applicators with water immediately after use. Do not apply this sealer to areas where sealer will be immersed such as fountains, pools or below grade areas. Do not use on porcelain, polished stone, granite or marble. For professional use only.WARRANTY: Glaze ‘N Seal product liability, either expressed or implied, is limited solely to the replacement of this product when proven to be defective and does not include any labor costs or consequential damages. It is the user’s responsibility to determine the safety, toxicity and suitability of this product.

Outperforms all of the competition! Brings out hidden colors of hard surfaces.

  • Richer, deeper, long lasting color enhancement.
  • For new and old concrete, masonry, stone and pavers.
  • Water base, easy to apply and easy to clean up.

 

This Month’s Featured Deals

Share feedback

Spotted a wrong image, a missing spec, or something that isn't working? Tell us and we'll fix it. For order questions, call 1 (800) 342-3876.

What is it about?