DRILLCO 7000 Carbide Burr Set — Aggressive Material Removal for Metalworking Professionals
The DRILLCO 7000 Carbide Burr Set (Item #70S001DC) is a professional-grade set of solid carbide rotary burrs engineered for contractors and trades professionals who demand fast, precise material removal across a wide range of metalworking applications. Manufactured from premium-grade tungsten carbide with a brazed shank construction, these burrs deliver consistent performance in deburring, weld removal, and material removal in tight spaces or on complex geometries. The set is available in double cut, single cut (Magnum), and aluminum/non-ferrous cut configurations across multiple set configurations to match the demands of any job. Using the burr at the correct speed will increase both life and performance.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | DRILLCO |
| Item # | 70S001DC |
| UPC | 045997399744 |
| Country of Origin | United States |
| Tooth Design | Double cut |
| Construction | Solid carbide head, brazed shank |
| Material | Premium grade tungsten carbide |
| Applications | Deburring, Weld Removal, Material removal in tight spaces, Material removal on complex geometries |
| Technical Tips | Using a burr at the correct speed will increase life and performance |
| Available Series | Standard lengths (single and double cut), 6" long series, miniature sizes (for use in pencil grinders) |
Available Items
| Item # | Description | Size |
|---|---|---|
| 70S001DC | SET 1, SOLID CARB BUR SET DBL CUT | 1 |
| 70S001SC | SET 1, SOLID CARB BUR SET SGL CUT MAGNUM | 1 |
| 70S002DC | SET 2, SOLID CARB BUR SET DBL CUT | 2 |
| 70S002SC | SET 2, SOLID CARB BUR SET SGL CUT MAGNUM | 2 |
| 70S003DC | SET 3, SOLID CARB BUR SET DBL CUT | 3 |
| 70S003SC | SET 3, SOLID CARB BUR SET SGL CUT MAGNUM | 3 |
| 70S004DC | SET 4, SOLID CARB BUR SET DBL CUT | 4 |
| 70S004SC | SET 4, SOLID CARB BUR SET SGL CUT | 4 |
| 70S005DC | SET 5, SOLID CARB BUR SET DBL CUT | 5 |
| 70S005SC | SET 5, SOLID CARB BUR SET SGL CUT | 5 |
| 70S006DC | SET 6, SOLID CARB BUR SET DBL CUT | 6 |
| 70S006SC | SET 6, SOLID CARB BUR SET SGL CUT | 6 |
| 70S007DC | SET 7, SOLID CARB BUR SET DBL CUT | 7 |
| 70S007SC | SET 7, SOLID CARB BUR SET SGL CUT MAGNUM | 7 |
| 70S010NF | SET 10, SOLID CARB BUR SET ALU CUT MAGNUM | 10 |
| 70S011DC | DRILLCO CARBIDE BURR SET | — |
Maximum Cutting Speeds by Burr Diameter
| Burr Diameter | Maximum RPM (Standard Length) | Maximum RPM (6" Long Burrs) |
|---|---|---|
| 1/4" | 70,000 | 35,000 |
| 5/16" | 68,000 | 34,000 |
| 3/8" | 66,000 | 33,000 |
| 7/16" | 58,000 | 29,000 |
| 1/2" | 50,000 | 25,000 |
| 5/8" | 40,000 | 20,000 |
Available Burr Shapes
| Shape | USCTI Type |
|---|---|
| Cylindrical | SA |
| Cylindrical (End Cut) | SB |
| Cylindrical Round Nose | SC |
| Ball | SD |
| Egg | SE |
| Tree | SF |
| Tapered | SG |
| Flame | SH |
| Cone 90° | SK |
| Cone | SL |
| Conical | SM |
| Inverted Cone | SN |
Compatible Materials by Cut Type
| Material | Double Cut | Non-Ferrous (Aluminum) Cut |
|---|---|---|
| Aluminum | — | ✓ |
| Brass | ✓ | ✓ |
| Bronze | ✓ | — |
| Cast Iron | ✓ | — |
| Copper | — | ✓ |
| Carbon Fiber | — | ✓ |
| Fiberglass | ✓ | — |
| Hard Rubber | ✓ | — |
| Inconel | ✓ | — |
| Magnesium | — | ✓ |
| Plastics | ✓ | — |
| Steel — 45–55 Rc | ✓ | — |
| Steel — 55–60 Rc | ✓ | — |
| Steel — Carbon | ✓ | — |
| Steel — Nickel Chrome | ✓ | — |
| Steel — Stainless | ✓ | — |
| Steel — Weldments | ✓ | — |
| Titanium | ✓ | — |
| Zinc | — | ✓ |
The DRILLCO 7000 series distinguishes itself through its solid carbide head construction and brazed shank design, which together deliver superior concentricity and reduced vibration compared to burrs with mechanically attached heads. The optimized flute geometry is engineered to balance fast stock removal with a fine finish, making these sets suitable for both rough material removal and finishing work without changing tools.
Key Features & Benefits
Double Cut Tooth Design
The double cut tooth pattern provides aggressive material removal across ferrous and non-ferrous metals. This design allows contractors to work faster through tough materials including stainless steel, Inconel, and hardened steels up to 60 Rc.
Solid Carbide Head Construction
Manufactured from premium-grade tungsten carbide, the solid carbide head delivers premium performance and maintains cutting edge integrity longer than lesser materials. This construction is suited to demanding metalworking environments where tool longevity directly impacts productivity.
Brazed Shank for Concentricity and Reduced Vibration
The brazed shank connection ensures perfect concentricity between the cutting head and shank, minimizing runout during operation. Reduced vibration translates to better operator control, improved surface finish, and less wear on the grinder.
Optimal Flute Geometry
The flute geometry is engineered for fast removal and fine finish in a single tool, reducing the need to switch between roughing and finishing burrs. This makes the set especially efficient for complex geometries and tight-space applications.
Broad Shape Selection
The 7000 series is available in twelve USCTI burr shapes — including cylindrical, ball, tree, flame, cone, conical, egg, and inverted cone — giving contractors the right profile for virtually any contour, cavity, or edge geometry they encounter on the job.
Multiple Series and Shank Options
Burrs are available in standard lengths, 6" long series, and miniature sizes for pencil grinders, with 1/4" and 1/8" shank diameters available. This range ensures compatibility with a wide variety of die grinders and point grinders used in the field.
Common Applications
Deburring
Removes sharp burrs and edges left after machining, cutting, or punching operations on metal workpieces, improving part safety and fit.
Weld Removal
Efficiently grinds down weld beads and spatter on fabricated assemblies, including stainless steel and carbon steel weldments, to achieve flush, clean surfaces.
Material Removal in Tight Spaces
The variety of burr shapes and the availability of miniature sizes for pencil grinders allow access to confined areas, ports, and recesses where larger abrasive tools cannot reach.
Material Removal on Complex Geometries
Ball, egg, flame, tree, and conical profiles conform to curved and contoured surfaces, enabling precise stock removal on complex part geometries without damaging surrounding areas.
Compatible Materials
- Aluminum (non-ferrous cut)
- Brass (double cut and non-ferrous cut)
- Bronze (double cut)
- Cast iron (double cut)
- Copper (non-ferrous cut)
- Carbon fiber (non-ferrous cut)
- Fiberglass (double cut)
- Hard rubber (double cut)
- Inconel (double cut)
- Magnesium (non-ferrous cut)
- Plastics (double cut)
- Steel — 45–55 Rc (double cut)
- Steel — 55–60 Rc (double cut)
- Steel — Carbon (double cut)
- Steel — Nickel Chrome (double cut)
- Steel — Stainless (double cut)
- Steel — Weldments (double cut)
- Titanium (double cut)
- Zinc (non-ferrous cut)
Product Documents
Safety Data Summary
Hazard Information
- Chemical composition: Cemented Carbide with Cobalt binder (Tungsten Carbide 80–97%, Cobalt 3–20%, Tantalum Carbide 0–15%, Vanadium Carbide 0.1–2%)
- Primary route of entry: Inhalation, skin contact, or eye contact from dust generated during grinding
- Inhalation of dust may cause irritation of the nose and throat; potential for transient or permanent respiratory disease including occupational asthma and interstitial fibrosis
- Cobalt dust is listed as IARC Group 2B (possibly carcinogenic to humans)
- Skin contact can cause irritation or allergic skin rash due to cobalt sensitization
- Eye contact may cause irritation
- NFPA Hazard Ratings: Health 3, Flammability 0, Reactivity 0
- Not combustible, not flammable, not pyrophoric, not explosive in solid form
- California Proposition 65 WARNING: This product can expose you to chemicals including Cobalt, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Incompatible with strong acids and strong oxidizers
Personal Protective Equipment
- Respiratory protection: Use an appropriate NIOSH-approved respirator if airborne dust concentration exceeds the applicable PEL or TLV
- Eye protection: Safety glasses or goggles with side shields; do not wear contact lenses; employer should provide an eyewash station in the immediate work area
- Gloves: Cloth or leather gloves recommended when contact with dust or mist is likely
- Hearing protection may be required
- Always use machine guards and wear protective clothing to prevent injury in the event of tool breakage
- Soiled clothing should be laundered separately
Safe Handling
- Use local exhaust ventilation adequate to limit personal exposure to airborne dust below PEL or TLV levels
- Clean up using methods that avoid dust generation: vacuum with appropriate filters, wet dust mop, or wet clean-up
- Do not shake clothing, rags, or other items to remove dust; remove dust by washing or vacuuming with appropriate filters
- Wash hands thoroughly after handling and before eating or smoking; wash exposed skin at end of work shift
- Store in a dry place; store in a manner that prevents accidental environmental contamination from traces of industrial lubricants or wetting oils
- For 6" tungsten carbide burrs: never use below 20,000 RPM
- Transport of solid Tungsten Carbide product is not regulated in Canada or the United States; no Hazard Class signage or special labelling required
- Dispose of or send to an appropriate reclamation facility in compliance with federal, state/provincial, and local environmental regulations
Frequently Asked Questions
Q: What tooth design does the 70S001DC use, and what is it best suited for?
A: The 70S001DC uses a double cut tooth design, which is engineered for aggressive material removal. Double cut burrs are recommended for ferrous metals including carbon steel, stainless steel, Inconel, titanium, and hardened steels up to 60 Rc, as well as materials such as fiberglass, hard rubber, and plastics.
Q: What is the difference between the double cut and single cut (Magnum) sets?
A: The double cut sets (item numbers ending in DC) use a cross-cut tooth pattern for aggressive stock removal on ferrous metals and hard alloys. The single cut Magnum sets (item numbers ending in SC) use a single-direction flute pattern. An aluminum/non-ferrous cut Magnum set (70S010NF) is also available, specifically designed for aluminum, copper, brass, zinc, magnesium, carbon fiber, and other non-ferrous materials.
Q: What is the maximum safe operating speed for these burrs?
A: Maximum RPM depends on burr diameter. For standard-length burrs: 1/4" — 70,000 RPM; 5/16" — 68,000 RPM; 3/8" — 66,000 RPM; 7/16" — 58,000 RPM; 1/2" — 50,000 RPM; 5/8" — 40,000 RPM. For 6" long burrs, maximum speeds are halved (e.g., 1/4" — 35,000 RPM). For safety reasons, never use 6" tungsten carbide burrs below 20,000 RPM.
Q: What burr shapes are available in the 7000 series?
A: The 7000 series is available in twelve USCTI shapes: Cylindrical (SA), Cylindrical End Cut (SB), Cylindrical Round Nose (SC), Ball (SD), Egg (SE), Tree (SF), Tapered (SG), Flame (SH), Cone 90° (SK), Cone (SL), Conical (SM), and Inverted Cone (SN).
Q: What shank sizes are available, and are these compatible with pencil grinders?
A: The 7000 series is available with 1/4" shank diameter for standard die grinders and 1/8" shank diameter for use in pencil grinders (miniature sizes). A 6" long series with 1/4" shank is also available for extended-reach applications.
Q: Why does the brazed shank construction matter for job site performance?
A: The brazed shank ensures perfect concentricity between the carbide cutting head and the shank. This minimizes runout during operation, which reduces vibration, gives the operator better control, and helps protect the grinder from unnecessary wear — all of which contribute to longer tool and equipment life.