All Weather Adhesive

Position, bond, and remove materials in tilt-up casting beds

A one-part, moisture cure that can be used in both wet and dry conditions to adhere a variety of substrates. The high strength bond is flexible and can provide sealant properties. Its high initial green strength and non-slump formula is ideal for both vertical and horizontal applications. Cure time can be 24 hours or more, depending on the environment.

The All Weather Adhesive bonds to a variety of materials such as concrete, foam, metal, MDF, rubber, plastic, wood, and ceramic. Other product characteristics include: 100% solids formulation, underwater curing, high initial green strength, low odor, 50 state VOC Compliance, Non-slump formula, and 24+ hour cure time depending on the environment.

Directions

1. Cut or pierce one end of the package.
2. Put in dispensing gun with opening facing nozzle.
3. Cut nozzle to desired bead size.
4. Prepare both surfaces to be bonded by removing all debris, dirt, and dust.
5. Dispense All Weather Adhesive onto material to be bonded using 1/4”+ diameter bead.
6. Press materials together.
7. Adhesive will begin immediately and continue for up to 7 days after application.