Battipav Supreme Bridge Saw — Precision Cutting for Natural Stone, Granite, and Marble
The Battipav Supreme is a professional-grade bridge saw engineered for cutting natural stones, granite, and marble slabs. Designed for contractors and stone fabricators, it features a manually advanced sliding engine carriage that delivers controlled, repeatable cuts across large-format material. The machine is built around a 3 HP single-phase motor and accepts a 12 in (Ø300 mm) diamond blade, making it a capable workhorse for slab fabrication shops and tile installation professionals. Three table-length configurations — 150S, 200S, and 260S — allow operators to match the machine to their typical slab sizes and workspace constraints.
Technical Specifications
| Specification | Details |
|---|---|
| Motor Power | 3 HP (2.2 kW) |
| Power Supply | Single phase 230V 50Hz |
| Current | 9 A |
| No-Load Speed | 2800 RPM |
| Blade Diameter | 12 in (Ø300 mm) |
| Arbor (Tool Hole) | 1 in |
| Max Cutting Thickness (Single Pass) | 3.35 in |
| Max Cutting Depth (2 Runs) | 5.31 in |
| Max Depth at 45° (Jolly) | 2.36 in |
| Working Table Width | 620 mm (approx. 24.4 in) |
| Overcurrent Protection | 13 A |
| Thermal Protection | 160°C |
| Water Pump | S3 |
| Disk Included | No (Disk Ø300 not included) |
| Structure | Aluminium draw-plate |
| Bridge/Rail Material | High-resistance aluminium extrusion with interchangeable stainless steel bearing tracks |
| Working Table Material | Galvanized steel |
| Water Tank Material | ABS |
| Carriage Bearings | 8 ball-bearings (4 always perpendicular to rail) |
| Switch | Switch with release coil |
| Overheat Protection | Manual reset |
| Laser Instrument | Standard |
| Kit Wheels | Standard |
| Adjustable Legs | Standard |
| Adjustable Goniometer Fence | Standard |
| Cutting Progress System | Standard (hand wheel) |
| Scale Measure | Millimetre graduated scale |
| Cable Routing | Integrated inside rail |
| Extension Side Table | Optional (galvanized steel, mountable on either side) |
Available Sizes
| Spec | SUPREME 150S | SUPREME 200S | SUPREME 260S |
|---|---|---|---|
| SKU | 150S | 200S | 260S |
| Max Cutting Length | 59.1 in | 78.7 in | 102.4 in |
| Tile Size for Diagonal Cut | 41.7 in × 41.7 in | 55.5 in × 55.5 in | 72.4 in × 72.4 in |
| Crated Dimensions (W×L×H) | 28.3 × 88.6 × 39.4 in | 28.3 × 108.3 × 39.4 in | — |
| Motor Power / Current | 3 HP (2.2 kW), 9 A | 3 HP (2.2 kW), 9 A | 3 HP (2.2 kW), 9 A |
| Max Cutting Thickness (Single Pass) | 3.35 in | 3.35 in | 3.35 in |
| Max Cutting Depth (2 Runs) | 5.31 in | 5.31 in | 5.31 in |
| Max Depth at 45° (Jolly) | 2.36 in | 2.36 in | 2.36 in |
| Blade Diameter | 12 in | 12 in | 12 in |
| Arbor (Tool Hole) | 1 in | 1 in | 1 in |
| No-Load Speed | 2800 RPM | 2800 RPM | 2800 RPM |
| Overcurrent Protection | 13 A | 13 A | 13 A |
| Thermal Protection | 160°C | 160°C | 160°C |
| Water Tank Capacity (Min / Max) | 8.2 / 12.9 gal | 10.6 / 15.9 gal | 11.9 / 13.2 gal |
| Water Pump | S3 | S3 | S3 |
| Side Bench Size | 58.5 × 24.6 in | 80.9 × 24.6 in | 106.9 × 24.6 in |
| Machine Dimensions (L×W×H) | 89.8 × 35.4 × 50.4 in | 109.4 × 35.4 × 50.4 in | 132.5 × 30.3 × 55.5 in |
| Weight | 212 lb | 227 lb | 356 lb |
| Side Tile Support | Optional | Optional | Optional |
| Long Slot for Side Support | Optional | Optional | Optional |
| Cutting Progress System | Standard | Standard | Standard |
| Side Bench with Rollers | Optional | Optional | Optional |
| Extension Side Bench | Optional | Optional | Optional |
| Wheels | Standard | Standard | Standard |
| Fence | Standard | Standard | Standard |
| Case Qty. | 1 | 1 | 1 |
The Supreme's aluminium draw-plate structure and high-resistance aluminium extrusion rail with interchangeable stainless steel bearing tracks set it apart from machines that rely on heavier steel frames — delivering rigidity and lightness simultaneously. The integrated cable routing inside the rail eliminates interference in the cutting area, a practical advantage over designs with exposed wiring that can snag or degrade under wet cutting conditions.
Key Features & Benefits
Aluminium Draw-Plate Structure
The frame is constructed from an aluminium draw-plate, achieving maximum rigidity without the weight penalty of a steel chassis. For contractors who need to reposition or transport the machine between job sites, the lighter frame reduces handling effort while maintaining the structural stability required for precision stone cutting.
High-Resistance Aluminium Rail with Stainless Steel Bearing Tracks
The bridge rail is extruded from high-resistance aluminium specifically engineered to resist torsional stress during cutting passes. Interchangeable stainless steel bearing tracks ensure the carriage maintains absolute cutting precision over the life of the machine, and worn tracks can be replaced without replacing the entire rail assembly.
8 Ball-Bearing Carriage (4 Perpendicular)
The engine carriage rides on 8 ball-bearings, with 4 always oriented perpendicular to the rail. This geometry keeps lateral play to a minimum, producing fast and precise sliding motion that translates directly into straight, consistent cuts through dense stone materials.
Tilting Engine Group with Graduated Depth Scale
Cutting depth is set by locking the tilt angle of the engine group, with a graduated scale that reads depth directly — no calculation required. The same mechanism enables 45° bevel cuts (Jolly position) up to 2.36 in deep, supporting mitered edge work on countertops and thresholds.
Integrated Laser Instrument
A laser instrument is included as standard equipment to project a cut line onto the workpiece before the blade engages. This allows the operator to align cuts precisely without scribing or measuring repeatedly, reducing material waste on expensive stone slabs.
Thermal and Amperometric Motor Protection
The 3 HP motor is protected by both thermal cutout (160°C) and overcurrent protection (13 A), with a manual-reset overheat function that activates if the blade jams. These safeguards protect the motor from damage during demanding cuts through hard granite or thick marble, reducing downtime and repair costs.
Water Recycling System with ABS Tank
The S3-rated water recycling pump circulates coolant to the blade continuously during cutting. The ABS water tank is designed to separate cutting slurry from the recycling water area, making it easier to clean and extending pump service intervals on busy job sites.
Millimetre Graduated Scale and Adjustable Goniometer Fence
A millimetre-graduated scale along the rail enables fast, repeatable cuts in series without re-measuring each piece. The adjustable goniometer fence allows angled cuts to be set and locked accurately, supporting consistent production of mitered or angled stone pieces.
Common Applications
Granite Slab Fabrication
The Supreme is specifically designed for cutting granite slabs, with a 3.35 in single-pass depth and 5.31 in two-pass depth accommodating standard countertop slab thicknesses.
Marble Cutting
Marble slabs and tiles are a primary use case, with the precision rail and bearing system delivering the clean, chip-free cuts that marble finishing work demands.
Natural Stone Tile Cutting
The machine handles natural stone tiles up to the maximum cutting length of the selected model (59.1 in for 150S, 78.7 in for 200S, 102.4 in for 260S), including diagonal cuts on large-format tiles.
Large-Format Diagonal Cuts
With diagonal cut capacity up to 72.4 in × 72.4 in on the 260S model, the Supreme supports installation of oversized stone tiles in diagonal layouts without requiring multiple passes or repositioning.
Mitered Edge and 45° Bevel Cuts
The tilting engine group enables 45° (Jolly) cuts up to 2.36 in deep, making the Supreme suitable for fabricating mitered countertop edges, thresholds, and decorative stone trim.
Compatible Materials
- Natural stone
- Granite
- Marble
Frequently Asked Questions
Q: What blade size does the Supreme require?
A: The Supreme is built to work with a diamond disk Ø300 mm (12 in) with a 1 in arbor (tool hole). The blade is not included with the machine.
Q: How thick a slab can the Supreme cut?
A: In a single pass, the Supreme cuts up to 3.35 in deep. Using two runs, maximum cutting depth reaches 5.31 in. At a 45° (Jolly) angle, maximum depth is 2.36 in.
Q: Which model size should I choose for my shop?
A: Choose based on the longest cuts you need to make: the 150S handles up to 59.1 in, the 200S up to 78.7 in, and the 260S up to 102.4 in. For diagonal cuts, the 150S accommodates tiles up to 41.7 in × 41.7 in, the 200S up to 55.5 in × 55.5 in, and the 260S up to 72.4 in × 72.4 in.
Q: What power supply does the Supreme require?
A: The Supreme runs on single-phase 230V 50Hz power, drawing 9 A under load, with overcurrent protection set at 13 A.
Q: What comes standard with the machine?
A: Standard equipment includes the laser instrument, kit wheels, adjustable legs, adjustable goniometer fence, cutting progress system with hand wheel, switch with release coil, overheat protection with manual reset, and the S3 water recycling pump. The diamond blade (Ø300 mm) is not included.
Q: Is an extension side table available for cutting oversized pieces?
A: Yes. An extension side table made of galvanized steel is available as an optional accessory and can be mounted on either side of the machine to support larger slab sizes during cutting.