Cure Hard Sodium Silicate Cure & Dustproofer

SKU: CH-5
Vendor
SpecChem
Regular price
$254.40
Sale price
$254.40
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Cure Hard is a clear, water-based concrete cure, hardener, and dustproofer that deeply penetrates for maximum abrasion resistance

Cure Hard densifies, seals, hardens, and dustproofs concrete and Portland cement-based surfaces without altering the natural color of the concrete or aggregate. It may contribute to LEED credits.

Key Features & Benefits

  • Does not alter the natural color of concrete or aggregate
  • Non-flammable, odorless, 0 g/L actual VOC content
  • Helps seal against acids, oils, greases, salts, and tire marks
  • Does not inhibit adhesion of secondary toppings, adhesives, or coatings

Application Instructions

  • Surface Preparation: Apply to clean, structurally sound surfaces free of water, laitance, and contaminants. For aged concrete, ensure surfaces are free of dirt and dry to maximize penetration.
  • Coverage Rates:
    • Hard Troweled Finish: 300-500 sq ft/gal
    • Broom or Float Finish: 200-400 sq ft/gal
    • Rough Finish: 200-300 sq ft/gal
    • Aged Concrete: 200-300 sq ft/gal
    • Vertical Surfaces: 200-300 sq ft/gal
  • Application: Can be applied with a sprayer, brush, or roller, immediately after final finishing operations once bleed water has receded. Ensure the surface does not pond or puddle. Use in temperatures from 40°F to 100°F.
  • Additional Applications: Apply immediately or up to 24 hours before installation of underlayment toppings. Reapply if exceeding 24 hours or if the continuous film is compromised.

Packaging

Available in 5-gallon pails.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

Go to full site