Diesel Forklift with Solid Pneumatic Tires - 7,000 lb Capacity

EKKO Diesel Forklift with Solid Pneumatic Tires — Heavy-Duty Material Handling for Demanding Job Sites

The EKKO Diesel Forklift series (EK20D, EK25D, EK30D, EK35D, EK40D) is a purpose-built, counterbalanced diesel forklift engineered for contractors, warehouse operators, and distribution professionals who require reliable heavy lifting in high-throughput environments. Powered by a Mitsubishi 4EG engine rated at 49 HP @ 2250 RPM and fully Tier 4 EPA compliant, this unit delivers consistent performance while meeting current emissions standards. Available in five load capacity configurations — 4,000, 5,000, 6,000, 7,000, and 8,500 lbs — the EKKO diesel forklift scales to match the demands of your operation. Solid pneumatic tires ensure durability and puncture resistance across both indoor and outdoor work surfaces.

Unlike standard material handling equipment, the EKKO diesel forklift integrates a Cascade® Side Shift attachment and a Shimadzu® 4-Way Valve (pre-plumbed) as standard equipment, eliminating the need for aftermarket hydraulic upgrades. The enlarged operator compartment, heightened overhead guard with a large arc-shaped front leg, and multifunctional suspended seat provide a level of operator comfort and visibility that directly reduces fatigue on long shifts. An impedance composited muffler further reduces sound output, making this unit more manageable in noise-sensitive site conditions.

Key Features & Benefits

Mitsubishi 4EG Engine — Tier 4 EPA Compliant

The 49 HP Mitsubishi 4EG engine provides dependable diesel power rated at 2250 RPM, meeting Tier 4 EPA emissions requirements for use on regulated job sites and in areas with strict emissions enforcement. Contractors can operate with confidence knowing the machine complies with current federal standards without sacrificing output.

Multi-Capacity Model Range (4,000–8,500 lbs)

With five models spanning 4,000 to 8,500 lbs of load capacity at a 24-inch load center, this series covers a wide range of material handling tasks without requiring multiple machine purchases. Contractors can select the exact capacity tier that matches their heaviest regular load, reducing both cost and over-spec risk.

Cascade® Side Shift — Factory Standard

The Cascade® Side Shift is included as standard equipment, allowing operators to precisely align fork loads laterally without repositioning the entire machine. This improves cycle time and reduces wear on both the truck and racking infrastructure.

Shimadzu® 4-Way Valve (Pre-Plumbed)

The factory-installed Shimadzu® 4-Way hydraulic valve comes pre-plumbed and ready for attachment use, saving contractors time and cost on auxiliary hydraulic setup. This is a meaningful advantage on sites where quick attachment changes are part of daily workflow.

Enhanced Operator Compartment & Suspended Seat

The enlarged operation space features a heightened overhead guard with a large arc-shaped front leg for improved visibility and headroom. The multifunctional suspended seat supports the driver, reduces vibration transmission, and balances driver weight — directly reducing operator fatigue during extended shifts.

Adjustable Steering Wheel & Impedance Composited Muffler

The steering wheel adjustment mechanism is positioned for easy ergonomic customization, accommodating operators of different sizes without tool use. The impedance composited muffler reduces sound output, keeping the machine within acceptable noise levels on mixed-use sites.

Solid Pneumatic Tires

Solid pneumatic tires eliminate the risk of puncture-related downtime on job sites with debris, rough pavement, or uneven surfaces. The 7.00-12-12PR front / 6.00-9-10PR rear wheel specification provides the footprint and load distribution needed for stable heavy lifting.

185-Inch Lift Height with Free Lift

With a maximum lift height of 185 inches and a free lifting height of 43.7 inches, this forklift can stack materials to substantial rack heights while the free-lift feature allows vertical movement in height-restricted areas before the mast begins to extend. Overall height with forks lifted reaches 225 inches, which contractors should verify against site clearances.

Common Applications

Warehouse Material Handling

The EKKO diesel forklift is designed explicitly for warehousing operations, where consistent lift cycles, high rack heights, and reliable load positioning are daily requirements. The Cascade® Side Shift and 185-inch lift height support efficient pallet racking operations.

Distribution Center Operations

Built for distribution environments, this unit handles the high-volume movement of palletized goods with load capacities up to 8,500 lbs. Traveling speeds of up to 11.8 mph (unloaded) and 10.6 mph (loaded) support fast throughput between dock and storage areas.

Construction Site Material Movement

Solid pneumatic tires and diesel power make this forklift well-suited for outdoor construction sites where electric or cushion-tire forklifts would be impractical. The unit's ground clearance of 4.3 inches at the mast provides basic clearance over uneven site surfaces.

Heavy Load Staging and Placement

With models reaching 8,500 lbs of capacity, contractors can use this forklift to stage and place heavy construction materials — including steel, precast elements, or bundled lumber — that exceed the range of lighter equipment.

Loading Dock Operations

The combination of diesel power, solid pneumatic tires, and a wheelbase of 62.9 inches makes this unit stable and maneuverable for loading dock environments where trucks are loaded and unloaded throughout the shift.

Compatible Materials

• Palletized construction materials (lumber, block, concrete products)
• Steel beams, pipe, and structural materials
• Bagged goods (cement, aggregate, dry mix)
• Boxed and crated equipment
• Warehoused inventory on standard pallet racking
• Distribution-center pallets and bulk loads

Technical Specifications

Frequently Asked Questions

Q: Is this forklift compliant with current EPA emissions regulations?
A: Yes. The EKKO diesel forklift is Tier 4 EPA compliant, making it suitable for use on job sites and in jurisdictions that require current-generation emissions standards.

Q: Does the side shift come standard or is it an optional add-on?
A: The Cascade® Side Shift is included as standard equipment on this forklift series — no additional purchase or installation is required.

Q: Is the hydraulic valve pre-configured for attachments?
A: Yes. The Shimadzu® 4-Way Valve is factory pre-plumbed, meaning the hydraulic circuit is ready for auxiliary attachment use without requiring additional plumbing work in the field.

Q: Can this forklift be used outdoors on rough or debris-covered surfaces?
A: The solid pneumatic tires are puncture-resistant and designed for use on surfaces where standard cushion-tire forklifts would be at risk. Diesel power also makes the unit independent of electrical infrastructure, well-suited for outdoor job sites.

Q: What load capacity model should I select?
A: The series spans five models — EK20D (4,000 lbs), EK25D (5,000 lbs), EK30D (6,000 lbs), EK35D (7,000 lbs), and EK40D (8,500 lbs) — all at a 24-inch load center. Select the model rated at or above your heaviest regular load.