Compact nibbler for trapezoidal sheet metal in roof and facade construction.
Features
- An uncompromising tool for handling trapezoid sheet metal with channels up to 6-5/16 in [160 mm] deep
- Optimum ergonomics, including a motor housing that is up to 20% slimmer due to an extremely narrow drive head
- Cutting direction setting can be changed in 45° increments up to 360° using tool-free rotating cutting head
- QuickIN rapid change system
- High cutting speed
- Chip protection mesh on vent slots
- 16 ft. [5 m] cable
- Stainless steel up to 22 gauge [0.7 mm]
Specifications
| Power Consumption | 350 W |
| Cable with plug | 16 ft |
| Cutting speed | 9 ft/min |
| Cutting width | 3/16 in |
| Non-ferrous metals up to 36,000 lbf/in² | 3/32 in |
| Power output | 210 W |
| Steel 87,000 lbf/in² | 3/64 in |
| Strokes | 800 - 1,500 spm |
| Weight | 4.19 lbs |
| Material | Metal & Plastic |
| Part number | 72323960120 |
What's Included
- Die for trapezoid sheet metal (31309122005), mounted
- Punch (63602049008), mounted
- Wearing plate, mounted
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device