SpecPoxy Grout is a three-component, 100% solids epoxy grout built for high-strength grouting and anchoring in demanding, dynamically loaded applications
SpecPoxy Grout blends a high-strength epoxy resin and curing agent with a specially engineered graded aggregate for excellent flow in a uniform matrix. Its low-exotherm resin allows a long work time and deep-pour capability up to 18 inches in a single lift.
Key Features & Benefits
- High-flow aggregate blend without segregation
- Excellent volume stability for maximum bond and load transfer under dynamic loading
- Fast cure and high early strength to reduce downtime
- High compressive, bond, and tensile strength
- Pre-measured proportions for straightforward installation
- Superior abrasion and chemical resistance
- Low exotherm resin for deep pours up to 18"
- USDA accepted for food processing applications
Application Instructions
- Anchor bolt holes must be clean and dry
- Pour continuously to avoid air voids, maintaining full contact with the base plate
- Place from a minimum of 1.0" to a maximum of 18" thick per lift
- Use full aggregate for applications over 6" deep
- Remove uncured material with SpecChem Solvent 100, Orange Peel, or another approved solvent
Technical Data Summary
- Compressive Strength (ASTM C579, full extension): 10,100 psi at 1 day, 13,350 psi at 7 days, 14,650 psi at 14 days
- Compressive Modulus (ASTM C580): 2,000,000 psi
- Linear Shrinkage (ASTM C531): Negligible
- Shelf Life: 2 years from manufacture date, stored in original tightly closed containers
Packaging
Available in 0.5 and 2.0 cubic foot units.