Designed for horizontal-to-vertical edge lifts and shear rotation of thin-wall panels
Lifting tilt-up panels from the edge is simple and safe with the Straight Leg Erection Anchor. The body of the Straight Erection Anchor is shaped to integrate with the panel reinforcement. The addition of a shear plate to the anchor design eliminates the need for a shear bar, making it easier to install.
Two steel “ears” at the top of the anchor “hug” either side of the Ring-Lift Clutch, restricting rotation during lateral pulls. Any lateral forces are directed into the anchor to prevent edge spalling.
A Disposable Former snaps over the top of the Straight Leg Erection Anchor. This removable and disposable plastic former keeps the lifting point identifi able and accessible after concrete placement is complete.
Though the anchor has an integrated shear plate to simplify installation, there are times when a Tension Bar might be added to maximize load capacity.
| Part No. | Description/Capacity | Clutch ID | Width | Length | Thickness |
|---|---|---|---|---|---|
| SBSLE4TSPG | Straight Leg Erection Anchor 4T | 4-5T | 3-1/16" | 10-1/2" | 5/8" |
| SBSLE8TSPGN | Straight Leg Anchor 8T - Narrow | 8-10T | 3-1/2" | 13" | 3/4" |
| SBSLE8TSPG | Straight Leg Erection Anchor 8T | 8-10T | 4" | 13" | 3/4" |
* Panels less than 6” thick require 4T Straight Leg Erection Anchor