Superior FUSION FV-9 Thick Knife Grade Adhesive for Natural Stone Fabrication
The Superior FUSION FV-9 is a fast-setting, thick knife-grade adhesive and filler engineered for porous natural stone surfaces. Built on a Modified Vinyl Ester chemistry, it delivers a high-strength bond across a wide range of stone types including marble, granite, limestone, travertine, and other sedimentary or porous materials. The FV-9 formulation is specifically designed for fabricators and installers who require reliable performance on both horizontal countertop work and vertical wall installations. Its pre-colored beige tint is matched to light natural stones and remains colorfast through the full curing process.
Unlike standard polyester or epoxy adhesives, the FV-9 combines rapid gel and cure times with a thick, non-sagging consistency that holds position on vertical surfaces without running or slumping. The polishable finish integrates seamlessly with the surrounding stone, producing clean edge quality that holds up through grinding and polishing operations — a critical requirement in finished countertop and tile work.
Key Features & Benefits
Modified Vinyl Ester Formula
Superior FUSION uses a Modified Vinyl Ester resin system rather than conventional polyester, providing stronger adhesion and improved chemical resistance on natural stone substrates. This technology is particularly effective on porous surfaces where standard adhesives may fail to penetrate and bond adequately. The result is a more durable joint that resists cracking, delamination, and moisture infiltration over time.
Fast Gel and Cure Times
With a gel time of 3–5 minutes and a full cure under 20 minutes, the FV-9 allows fabricators to move pieces through production quickly without extended hold times. Shorter downtime between application and next operation translates directly to increased throughput in a shop environment. This speed is consistent across the recommended 1–2% BPO Paste Hardener mix ratio.
Non-Sagging Thick Knife Grade Consistency
The FV-9 designation indicates a thicker body than the standard FV-5 Knife Grade, giving the adhesive enough viscosity to stay in place on vertical joints, seams, and repairs without additional support. This makes it suitable for wall cladding, backsplash installation, and vertical stone panel work where thinner adhesives would migrate before curing. The knife-grade body also allows precise placement and shaping with a putty knife or spatula.
Colorfast Beige Tint
The adhesive is pre-tinted to a beige tone that closely matches a wide range of light natural stones, and the color does not shift during or after the curing process. This eliminates the need for tinting and reduces visible joint lines on beige, cream, and light tan stone varieties. Consistent color is especially important in kitchen countertop fabrication and high-visibility stone installations.
Polishable Finish with Edge Quality
Once cured, FV-9 can be ground, shaped, and polished to match the surrounding stone surface. The cured adhesive maintains edge integrity through diamond tooling operations, making it appropriate for seam work on countertops and edge repairs where the joint must be finished to a polished standard. This differentiates it from adhesives that chip, tear, or discolor under grinding pressure.
One-Year Shelf Life
The one-year shelf life provides practical inventory flexibility for shops and contractors who may not use high volumes continuously. Proper storage in a cool, dry location extends usable life and reduces product waste. The shelf life is consistent with industry standards for BPO-catalyzed vinyl ester adhesives.
Common Applications
Countertop Seaming
FV-9 is well suited for joining stone slabs at seams on kitchen and bathroom countertops, where a strong, polishable, and color-matched bond is required. The fast cure time keeps fabrication schedules on track and the polishable finish ensures the seam disappears after finishing operations.
Vertical Stone Installation
The non-sagging thick body holds adhesive in position on vertical surfaces such as wall cladding, stone veneer panels, and fireplace surrounds without slumping before cure. This eliminates the need for temporary mechanical support in many installations.
Stone Edge Repair
Chipped or broken edges on natural stone can be rebuilt and shaped using FV-9, which bonds strongly to existing stone and can be carved and polished after cure. The beige color match reduces visual evidence of the repair on light-colored materials.
Crack and Void Filling
As a multi-purpose adhesive and filler, FV-9 is effective for filling natural voids, pits, fissures, and cracks in porous stone prior to fabrication or installation. Filling voids before cutting or polishing prevents breakout and strengthens structurally weak areas of the slab.
Backsplash and Tile Installation
The product's vertical non-sag properties and fast cure make it appropriate for bonding natural stone tiles and backsplash pieces to vertical substrates. The open time of 3–5 minutes allows for positioning adjustments before the adhesive sets.
Broken Piece Re-bonding
Broken corners, noses, or fragments of natural stone slabs and tiles can be re-bonded with FV-9 prior to finishing. The high-strength Modified Vinyl Ester bond resists the stresses of polishing and normal use after re-bonding.
Compatible Materials
- Porous natural stone (limestone, travertine, sandstone)
- Marble and marble composites
- Granite
- Quartzite
- Onyx
- Slate
- Beige and light-toned natural stone varieties
- Wide variety of stone surfaces as noted by manufacturer
Available Sizes
| Size | Best For |
|---|---|
| Quart | Small shop jobs, repairs, and sampling; lower volume use |
| Gallon | Mid-volume fabrication shops and regular seaming work |
| 5-Gallon Pail | High-volume production shops requiring bulk adhesive supply |
| THE BIG BOX - Standard | Bundled supply for ongoing project or contractor use |
| THE BIG BOX - Enhanced | Bundled supply with enhanced configuration for larger or specialty operations |
Application Instructions
Surface Preparation
- Clean both mating surfaces thoroughly to remove dust, oil, water, and any loose material.
- Ensure both surfaces are completely dry before applying adhesive.
- Where applicable, profile or key the surfaces to improve mechanical adhesion.
Mixing
- Measure out the required quantity of FV-9 adhesive base.
- Add BPO Paste Hardener at a ratio of 1–2% by weight to the adhesive.
- Mix thoroughly until the hardener is fully incorporated and the mixture is uniform in color and consistency.
- Work within the 3–5 minute gel time window after mixing.
Application
- Apply an even bead or layer of mixed adhesive along the joint, seam, void, or repair area using a putty knife or spatula.
- Press surfaces together firmly and hold or clamp as needed.
- For vertical applications, ensure the adhesive is applied with sufficient body to prevent migration before cure.
- Allow the adhesive to reach full cure — under 20 minutes — before subjecting the joint to stress, tooling, or polishing.
Safety During Application
- Work in a well-ventilated area to minimize vapor exposure.
- Wear chemical-resistant gloves and appropriate eye protection throughout mixing and application.
- Follow all local safety regulations applicable to chemical products and power tools.
Technical Specifications
| Specification | Details |
|---|---|
| Product Line | Superior FUSION |
| Grade | FV-9 Thick Knife Grade |
| Resin Type | Modified Vinyl Ester |
| Mix Ratio (Hardener) | 1–2% BPO Paste Hardener by weight |
| Gel Time | 3–5 minutes |
| Cure Time | Under 20 minutes |
| Shelf Life | 1 year |
| Color | Beige (colorfast through cure) |
| Consistency | Thick Knife Grade (non-sagging) |
| Application Orientation | Vertical and horizontal |
| Finish | Polishable |
| SKU | 200-10420-10 |
| Available Sizes | Quart, Gallon, 5-Gallon Pail, THE BIG BOX Standard, THE BIG BOX Enhanced |
Safety Data Summary
Hazard Information
- Contains BPO (Benzoyl Peroxide) Paste Hardener — oxidizer; handle with care and keep away from heat and ignition sources
- Resin and hardener components may cause skin and eye irritation on contact
- Vapors may be generated during mixing and application; avoid prolonged inhalation
Personal Protective Equipment
- Chemical-resistant gloves required during mixing and application
- Safety glasses or face shield recommended
- Respiratory protection advised in confined or poorly ventilated spaces
Safe Handling
- Work in a well-ventilated area at all times
- Follow all local safety regulations for chemical products and power tools
- Store in a cool, dry location away from direct sunlight and heat sources
- Keep hardener and resin components separate until ready to use
- Dispose of waste material in accordance with local regulations
Frequently Asked Questions
Q: What is the difference between FV-5 and FV-9?
A: FV-5 is a standard knife-grade consistency, while FV-9 is a thicker knife-grade formulation. FV-9 has greater body and is less likely to migrate on vertical surfaces or in deeper voids, making it the preferred choice for wall applications or larger gap fills.
Q: Can FV-9 be polished after cure?
A: Yes. Once fully cured, FV-9 can be ground and polished using standard diamond tooling. It maintains edge integrity through the polishing process and produces results consistent with the surrounding stone surface.
Q: How much BPO Paste Hardener should be used?
A: The recommended mix ratio is 1–2% BPO Paste Hardener by weight. Using more hardener accelerates gel and cure times; using less extends working time. Stay within the specified range to ensure a complete, consistent cure.
Q: Is FV-9 suitable for exterior stone applications?
A: The product data does not specify exterior ratings. Verify with the manufacturer for exterior or high-moisture environments before specifying for outdoor use.
Q: What stone colors is the beige tint compatible with?
A: The beige tint is matched to beige, cream, tan, and light natural stone varieties. For darker stones such as black granite or dark marble, a color-matched alternative adhesive should be selected to minimize visible joint lines.
Q: Can FV-9 be used to fill natural voids in slabs before cutting?
A: Yes. FV-9 is effective as a void and crack filler in porous natural stone prior to fabrication. Filling voids before cutting strengthens structurally weak areas and prevents edge breakout during sawing and shaping operations.