Tool Lanyard Screw Gate – 15 lb. Rated ANSI/ISEA 121-2018 Compliant Tool Tether
The Palmer Safety T2203 Tool Lanyard with Screw Gate Carabiner is a 15 lb. tool-rated stretch lanyard designed to secure hand tools and prevent dropped-object incidents on elevated worksites. Built for contractors and trades professionals working at height, it features an elasticated polyester webbing body and a lightweight high-strength aluminum screw gate carabiner for secure belt attachment. The T2203 meets or exceeds the ANSI/ISEA 121-2018 standard for Screw Gate Carabiners, making it a compliant solution for job sites with dropped-object prevention requirements.
Technical Specifications
| Specification | Details |
|---|---|
| SKU | T2203 |
| Tool Rating | 15 lbs. |
| Strength | 15 lbs. |
| Length | 51.18 in. |
| Weight | 0.12 lbs. ± 0.004 lbs. |
| Webbing Material | 0.55 in. polyester (elasticated) |
| Carabiner Material | High strength aluminum |
| Carabiner Type | Screw Gate |
| Compliance | Meets or exceeds ANSI/ISEA 121-2018 standard for Screw Gate Carabiner |
| Model Description | 36" Tool Lanyard w/Carabiner |
| Test Date | 4/9/2019 |
| Test Configuration | 3' Free Fall |
Unlike basic tool tethers that use fixed-length webbing, the T2203 uses elasticated polyester webbing that contracts when not under load, keeping the lanyard out of the way during work. The screw gate carabiner provides a more secure closure than snap hooks, reducing the risk of accidental gate opening during dynamic tool use.
Key Features & Benefits
Elasticated Stretch Webbing
The 0.55 in. polyester webbing is elasticated, allowing it to extend when needed and retract when not in use. This contraction property keeps the lanyard tidy and reduces snag hazards on the worksite.
Screw Gate Carabiner Closure
The screw gate carabiner provides a positive, manually locked closure that resists accidental opening under load or vibration. This is a more secure attachment method than open-gate or snap-hook alternatives, particularly important when tools are in active use.
Lightweight Aluminum Carabiner
The high-strength aluminum carabiner keeps the overall lanyard weight to just 0.12 lbs., minimizing fatigue and bulk when multiple lanyards are worn simultaneously. Aluminum construction also resists corrosion in outdoor and wet environments.
ANSI/ISEA 121-2018 Compliance
The T2203 meets or exceeds the ANSI/ISEA 121-2018 standard for Screw Gate Carabiners, satisfying dropped-object prevention compliance requirements on regulated job sites. A Declaration of Conformance is available for documentation purposes.
Belt Attachment Design
The carabiner is sized and configured for attachment directly to the user's belt or tool belt loop, keeping the secured tool within easy reach. This attachment method allows the worker to remain productive while maintaining tool tethering compliance.
Common Applications
Elevated Construction Work
Secure hand tools to a worker's belt when performing tasks from scaffolding, ladders, or elevated platforms where a dropped tool poses a serious hazard to personnel below.
Dropped-Object Prevention Programs
Use as part of a site-wide dropped-object prevention program where ANSI/ISEA 121-2018 compliant tool tethering is required or specified by the general contractor.
Tool Holding During Overhead Work
The stretch lanyard allows tools to be held conveniently at the user's side or extended overhead without the lanyard going taut, making it practical for sustained overhead tasks.
Compatible Materials
- Compatible with tools and equipment rated up to 15 lbs.
- Attaches to standard tool belt loops and D-rings
- Compatible with tools featuring wrist strap loops, carabiner attachment points, or tool rings
Product Documents
Frequently Asked Questions
Q: What is the maximum tool weight this lanyard can secure?
A: The T2203 is rated for tools up to 15 lbs.
Q: Does this lanyard meet ANSI/ISEA 121-2018 requirements?
A: Yes. The T2203 meets or exceeds the ANSI/ISEA 121-2018 standard for Screw Gate Carabiners. A Declaration of Conformance document is available for download.
Q: How long is the lanyard when fully extended?
A: The lanyard has a maximum length of 51.18 inches (approximately 51 inches) when extended.
Q: Where does the carabiner attach on the user?
A: The lightweight aluminum screw gate carabiner is designed for attachment to the user's belt or tool belt loop.