VZB Z Flashing — Long-Lasting Water Penetration Protection for Vertical Surfaces
The VZB Z Flashing is a professionally engineered flashing solution designed to prevent water infiltration at critical transition points on exterior wall assemblies. Available in primed galvanized steel or color-matched aluminum, it is suited for contractors working on residential and commercial siding installations. Primary applications include window trim, band boards, panel intersections, and other vertical surfaces where moisture management is essential. The 8-foot standard length and optional hem configuration make it adaptable to a wide range of project requirements.
Technical Specifications
| Specification | Details |
|---|---|
| Material (Primed) | .019 ± .003 Galvanized steel with proprietary coating that protects against harsh weather conditions and allows for paint adhesion |
| Material (Color Matched) | .019 ± .003 Aluminum sheet coated 2 sides with paint system specifically formulated for exterior applications |
| Standard Length | 8 ft |
| Hem (Primed) | Available upon request |
| Hem (Color Matched / Standard Colors) | Standard on all standard colors |
| Color Options | Available in most popular siding and soffit colors; specify color code using Color Palette |
| Dimensions | All dimensions are nominal |
| Applications | Window trim, band boards, panel intersections, and other vertical surfaces |
Available Variants
| Item ID |
|---|
| VZB518 |
| VZB518W |
| VZB388 |
| VZB12 |
| VZB18 |
Unlike generic flashing products, the VZB Z Flashing is offered in both a primed galvanized steel option for field-painted applications and a color-matched aluminum option pre-coated with an exterior-grade paint system, eliminating the need for additional finishing on most standard siding and soffit color schemes. The proprietary coating on the primed version provides weather resistance while maintaining paint adhesion, giving contractors flexibility in how they finish the installation.
Key Features & Benefits
Dual Material Options
The VZB is available in primed galvanized steel or color-matched aluminum, allowing contractors to select the right material for their specific project finish requirements. The primed version accepts field-applied paint, while the color-matched aluminum arrives pre-finished for faster installation.
Proprietary Weather-Resistant Coating (Primed)
The galvanized steel primed version features a proprietary coating engineered to withstand harsh weather conditions. This coating also promotes paint adhesion, ensuring a durable finish bond when the flashing is painted on-site.
Exterior-Grade Paint System (Color Matched)
The color-matched aluminum variant is coated on both sides with a paint system specifically formulated for exterior applications. This dual-side coating provides consistent protection and appearance, reducing callbacks related to coating failure.
Hem Option for Enhanced Water Shedding
A hem is standard on all color-matched standard colors and available upon request on the primed version. The hem provides a finished edge that improves water shedding performance at the flashing termination point.
8-Foot Standard Length
The 8-foot standard length reduces the number of joints required on typical window and band board runs, minimizing potential leak points and speeding up installation.
Common Applications
Window Trim Flashing
Installs over window trim to direct water away from the window-to-wall interface, preventing moisture intrusion at one of the most common failure points in exterior wall assemblies.
Band Board Protection
Applied over band boards to shed water at floor-line transitions, protecting the structural framing below from water damage.
Panel Intersections
Used at siding panel intersections to bridge the gap between panels and prevent water from tracking behind the cladding system.
Vertical Surface Transitions
Suitable for any vertical surface transition where a durable, weather-resistant flashing is required to stop water penetration.
Product Documents
Frequently Asked Questions
Q: What surfaces is the VZB Z Flashing designed for?
A: The VZB Z Flashing is designed for use over window trim, band boards, panel intersections, and other vertical surfaces where water penetration prevention is required.
Q: What is the standard length of the VZB Z Flashing?
A: The standard length is 8 feet. All dimensions are nominal.
Q: What is the difference between the primed and color-matched versions?
A: The primed version is made from .019 ± .003 galvanized steel with a proprietary coating that protects against harsh weather and allows for paint adhesion — it is intended to be painted on-site. The color-matched version is made from .019 ± .003 aluminum sheet coated on both sides with a paint system specifically formulated for exterior applications, and is available in most popular siding and soffit colors.
Q: Does the VZB Z Flashing come with a hem?
A: A hem is standard on all color-matched standard color versions. For the primed version, a hem is available upon request.
Q: Which item IDs are available for the VZB Z Flashing?
A: The VZB Z Flashing is available in the following item IDs: VZB518, VZB518W, VZB388, VZB12, and VZB18.
Q: Can the color-matched version be used on soffit applications?
A: The color-matched aluminum version is available in most popular siding and soffit colors, making it suitable for projects where color coordination with soffit materials is required.