Center-Controlled Rider Pallet Jack - 5,000 lb Capacity for High-Demand Material Handling

EKKO EPC30A Center-Controlled Rider Pallet Jack — 5,000 lb Capacity for High-Demand Material Handling

The EKKO EPC30A Center-Controlled Rider Pallet Jack delivers the versatility of a standard pallet jack with full-power electric lifting and driving capabilities, rated for up to 5,000 lbs of load capacity. Engineered for contractors and warehouse professionals, it is purpose-built for long-haul transport runs, truck loading and unloading, loading docks, stock rooms, manufacturing floors, and warehousing environments. The center-controlled rider design allows the operator to stand and ride during transit, significantly reducing fatigue on extended shifts. High-quality steel construction paired with robotic welding ensures structural integrity across demanding, high-cycle applications.

Unlike walk-behind pallet jacks, the EPC30A combines rider comfort with powered drive and lift, reducing operator effort on every run. The ZF German AC Drive Motor and Curtis Controller pair deliver precise, responsive control, while the included 24V/360Ah battery and charger mean the machine is ready to work from day one without additional procurement.

Technical Specifications

Key Features & Benefits

ZF German AC Drive Motor with Curtis Controller

The ZF German AC Drive Motor paired with a Curtis Controller provides reliable, efficient power delivery across varying load conditions and directional changes. For contractors operating in high-cycle environments, this combination reduces motor wear and supports consistent performance throughout a full shift.

Full-Power Electric Lift and Drive

The EPC30A provides both powered lifting and powered driving, eliminating the manual effort required by walk-behind or semi-electric alternatives. This is particularly valuable on loading docks and long warehouse aisles where repeated manual pumping would slow productivity and increase operator fatigue.

5,000 lb Load Capacity with 27" x 45" Forks

Rated to handle 5,000 lbs, the EPC30A covers the full range of standard pallet loads encountered in warehousing, manufacturing, and distribution. The 27" x 45" fork dimensions are compatible with standard GMA pallets, making the unit immediately deployable across common supply chain applications.

Low Lowered Height of 3.35"

A lowered fork height of 3.35" allows the unit to slide under low-clearance pallets with minimal effort. This is a practical advantage when working with pallets on flat floors or tight dock-level entries where fork entry clearance is limited.

Steel Construction with Robotic Welding

The all-steel frame constructed using robotic welding delivers consistent weld quality and structural durability throughout the chassis. This construction approach is designed to withstand repeated impacts, heavy loads, and directional changes typical of busy warehouse and manufacturing environments.

Polyurethane Drive Wheels and Steel Entry Wheels

Polyurethane drive wheels provide traction and floor protection on smooth warehouse and dock surfaces, while steel entry wheels at the fork tips handle the stress of pallet entry and floor contact. This dual-wheel system balances durability at the fork tip with ride quality during transport.

Included 24V/360Ah Battery and Charger

The EPC30A ships complete with a 24V/360Ah battery and charger, eliminating additional sourcing costs at commissioning. For contractors equipping a facility, this out-of-the-box readiness reduces setup time and total landed cost.

Ergonomic Handle and Center-Controlled Rider Design

The ergonomic handle and center-controlled operator position reduce strain during extended operation. The rider platform allows operators to travel with the load rather than walking behind, improving efficiency on longer runs across large floor areas.

Common Applications

Long-Haul Warehouse Transport

The rider platform and powered drive make the EPC30A well-suited for moving palletized loads across large warehouse floors where walking distances would slow a manual or walk-behind jack.

Truck Loading and Unloading

The low 3.35" lowered height and 5,000 lb capacity allow efficient loading and unloading of freight trucks directly at the dock, handling standard pallet weights found in distribution operations.

Loading Dock Operations

The unit's powered lift and drive capability enables fast, controlled pallet movement in dock-to-storage transfers, reducing turnaround time during receiving and shipping.

Stock Room Replenishment

In stock room environments where pallets are moved frequently between storage and pick areas, the rider design reduces operator fatigue and increases the number of loads that can be moved per shift.

Manufacturing Floor Material Handling

On manufacturing floors where materials must be delivered to workstations or production lines, the EPC30A provides powered transport over flat concrete surfaces with directional control suited to congested layouts.

Warehousing Operations

General warehousing applications including put-away, retrieval, and staging of palletized goods are supported by the unit's capacity, fork dimensions, and powered operation.

Compatible Materials

• Standard GMA wood pallets
• Plastic pallets
• Palletized boxed goods and cartons
• Palletized bagged materials
• Palletized drums and containers
• Flat concrete warehouse floors
• Loading dock surfaces
• Manufacturing floor surfaces

Frequently Asked Questions

Q: Does the EPC30A include a battery and charger?
A: Yes. The unit ships with a 24V/360Ah battery and a charger included, so no additional power equipment is required at setup.

Q: What is the fork size on the EPC30A?
A: The forks measure 27" wide by 45" long, compatible with standard pallet dimensions used in warehousing and distribution.

Q: What type of motor does the EPC30A use?
A: The EPC30A is equipped with a ZF German AC Drive Motor controlled by a Curtis Controller for efficient and responsive powered operation.

Q: What warranty does the EPC30A carry?
A: The unit is covered by a 3-Year Limited Warranty from EKKO.

Q: What is the minimum floor clearance required to enter a pallet?
A: The forks lower to 3.35", allowing entry under pallets with that minimum clearance from the floor surface.