SpecPatch Light (Pack of 6)

SpecPatch Light is a light-gray, polymer-modified concrete repair mortar shapeable into feather-edge finishes on interior and exterior surfaces

SpecPatch Light works on concrete floors, walls, precast, tilt-up, and masonry surfaces for both horizontal and vertical repairs, and can be shaped by shaving or sanding once set.

Key Features & Benefits

• One-component — just add water
• Light gray color
• Feather-edge finishing capability
• Suitable for horizontal and vertical applications
• Generally self-curing

Application Instructions

• Ensure the concrete is sound and free of oil, grease, dust, and other contaminants
• Saw-cut 1/8" deeper than the repair depth around the perimeter for a notched, reinforced edge
• Roughen the surface to a minimum CSP of 5 per ICRI 310.2, keeping it damp with no standing water
• Remove rust from exposed steel reinforcement and coat with SpecPrep SB
• Mix 6.75-7.25 pints of clean water per 50 lb bag with a low-speed drill for 2-3 minutes
• Mixing with SpecChem StrongBond Acrylic Bonder is recommended for areas subject to heavy wear
• Apply firmly, overfilling slightly, then shape to the desired contour after initial set; apply in layers up to 1" thick, roughening between layers
• In dry conditions, a water-based curing compound compliant with ASTM C309 may be used

Packaging

Available in 50 lb bags.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)