Super Por-Rok® Premium Cement Based Anchoring Cement

Super Por-Rok is a non-shrink, hydraulic, controlled-expansion anchoring cement that sets in 20-30 minutes and outperforms concrete strength within 6 hours

Super Por-Rok is a ready-to-use anchoring and patching cement — just add water on site. It's designed for anchoring heavy machinery, railings, guard rails, and banisters, and for repairing cracks in damaged concrete substrate, with no rodding, chaining, or vibrating required.

Key Features & Benefits

• Pourable, ready-to-use preparation — no heating or two-component mixing needed
• Ideal for patching floors, walls, and cracks, and caulking foundation or wall voids
• Suitable for interior or exterior use
• Quick setting — sets in 20-30 minutes and expands as it sets
• Stronger than concrete within 6 hours
• Complies with ASTM C1107 properties when tested at 73°F

Application Instructions

• Mix with clean potable water at 15% by weight (or about 2.3 oz of water per pound of product for small batches) to a smooth, flowable consistency
• Pour around the anchoring bolt or into the prepared hole, filling even with the substrate level — do not leave in conditions where water can puddle
• Concrete should be at least 28 days old and fully cured before anchoring
• Clean the hole of all debris and dampen the sides and bottom before pouring
• Use an appropriately sized flat washer for the anchor bolt
• Avoid drilling anchor holes within 4 inches of concrete corners or edges
• Keep application temperatures above 32°F for at least 24 hours after placement

Packaging

Available in 10 lb pails (case of 4) and 50 lb pails (pack of 6).

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)