10" Industrial Grade Plastic Hand Cup for Curved Surfaces - Pack of 4

Wood's Powr-Grip N6000 — 10" Industrial-Grade Plastic Handle Vacuum Hand Cup for Curved and Irregular Nonporous Surfaces (175 lbs / 79 kg) — Pack of 4

The Wood's Powr-Grip N6000 is a heavy-duty vacuum hand cup engineered for the safe lifting and handling of curved and irregular smooth, nonporous surfaces weighing up to 175 lbs (79 kg). Featuring a 10" (25 cm) standard rubber suction pad (Model G0750), an all industrial-grade plastic handle and plunger, a minimum curved surface radius of 13" (330 mm), and a minimum material thickness of 1/4" (6.35 mm), the N6000 delivers the same high-capacity curved-surface performance as the metal-handle N6450 in a lightweight, rust-resistant plastic construction suited for environments where corrosion resistance and reduced tool weight are operational priorities. Alternative vacuum pad compounds are available for special applications. Sold as a Pack of 4 (SKU: 91760, Model: N6000), the kit supports multi-cup lifts and provides redundant tooling for high-volume curved-surface handling operations. Manufactured by Wood's Powr-Grip. Not for use on thin, fragile materials.

The N6000 is the all-plastic counterpart to the metal-handle N6450 — both use the same 10" G0750 pad and share the same 175 lb capacity, 13" minimum radius, and 1/4" minimum material thickness rating, but the N6000 uses industrial-grade plastic for both handle and plunger (lightweight, rust-resistant) while the N6450 uses a metal handle (maximum rigidity and durability). The N6000 is also sold as a Pack of 4 rather than individually, making it the preferred choice for operations requiring multiple cups for coordinated lifts or high-volume curved-surface handling. The G0750 pad is interchangeable between the N6000 and N6450, simplifying pad inventory management for operations that stock both models.

Key Features & Benefits

Industrial-Grade Plastic Handle and Plunger — Lightweight and Rust-Resistant

The all industrial-grade plastic handle and plunger construction makes the N6000 significantly lighter than the metal-handle N6450, reducing operator fatigue during high-repetition curved-surface lifting tasks and making it easier to carry and maneuver on job sites. Industrial-grade plastic resists rust and corrosion in wet, humid, and coastal environments where metal handles would require additional maintenance or would degrade over time. For operations where tool weight and corrosion resistance are priorities — such as wet glazing environments, coastal job sites, or operations requiring multiple cups per technician — the N6000 is the correct choice over the N6450.

Curved and Irregular Surface Capability (Min. 13" Radius)

The N6000 is rated for curved and irregular smooth, nonporous surfaces with a minimum radius of 13" (330 mm), matching the N6450 exactly. This covers the majority of curved architectural glass, cylindrical glass, curved stone panels, bent metal sheet, and curved composite panels encountered in glazing, stone fabrication, HVAC, and architectural metalwork. Note that the N6000 is rated for curved surfaces only — unlike some other WPG cups that are rated for both flat and curved, the N6000 is specifically designed for curved and irregular surface applications. Always confirm the surface radius before use.

175 lb (79 kg) Rated Load Capacity

At 175 lbs (79 kg), the N6000 carries the highest load rating in the standard WPG hand cup range — matching the N6450 and enabling single-operator handling of large, heavy curved panels that would otherwise require mechanical assist or multi-person lifts. The pack-of-4 configuration supports coordinated multi-cup lifts for panels exceeding the single-cup rating. Always confirm the actual panel weight before selecting this tool for a lift.

10" Standard Rubber Suction Pad (Model G0750) — Alternative Compounds Available

The 10" (25 cm) G0750 pad provides the largest contact area in the standard WPG hand cup lineup, improving vacuum retention and seal stability on curved and irregular surfaces. The standard rubber compound is optimized for smooth, nonporous materials and maintains flexibility across the rated operating temperature range. Alternative vacuum pad compounds are available for special applications — contact your Wood's Powr-Grip authorized distributor for compound options suited to specific surface materials or environmental conditions. The G0750 pad is interchangeable with the N6450, simplifying replacement pad inventory.

1/4" (6.35 mm) Minimum Material Thickness

The N6000 requires a minimum material thickness of 1/4" (6.35 mm). Do not use on thin or fragile materials — vacuum pressure can cause thin glass or stone to fracture. Always confirm material thickness before use, and never use the N6000 on materials that are inherently fragile regardless of thickness.

Fast Attach and Release — Red-Line Indicator — Protective Carrying Case Included

The quick-engage vacuum mechanism allows rapid attachment and release without tools. The built-in red-line indicator provides a continuous visual warning if vacuum pressure drops significantly during a lift — monitor it before and throughout every lift. Each N6000 ships with a protective carrying case that keeps the pad clean and protected between uses.

Common Applications

Curved Architectural Glass Installation

Glaziers handling curved architectural glass — including curved curtain wall panels, barrel vault glass, curved storefront glass, and large-radius architectural feature glazing — use the N6000 where the lightweight plastic construction reduces fatigue during extended glazing shifts and the rust-resistant handle performs reliably in wet or outdoor environments. The pack-of-4 configuration supports multi-cup team lifts on large curved glass panels.

Cylindrical and Bent Glass Handling

Glass fabricators handling cylindrical glass sections, bent tempered glass, and curved laminated panels use the N6000 during cutting, edging, and assembly operations. The 13" minimum radius rating covers the majority of cylindrical and bent glass profiles used in commercial glazing and specialty glass fabrication.

Curved Stone and Countertop Positioning

Stone fabricators working with curved granite, marble, or engineered stone profiles use the N6000 to safely lift and position curved stone sections. The 175 lb capacity accommodates most curved stone sections, and the lightweight plastic construction reduces fatigue during repeated stone handling in wet fabrication environments.

Bent and Formed Metal Sheet Handling

In HVAC, architectural metalwork, and sheet metal fabrication, the N6000 handles bent, rolled, or formed smooth metal panels where edge gripping would risk deformation or injury. The rust-resistant plastic construction is particularly appropriate in wet or humid metal fabrication environments.

Wet and Coastal Environment Curved Surface Handling

In environments where moisture, humidity, or salt air would accelerate corrosion on metal-handle cups, the N6000’s all-plastic construction provides a maintenance-free alternative for curved-surface handling. This makes it the preferred choice for glaziers and installers working in coastal, marine, or consistently wet environments where the N6450’s metal handle would require additional care.

Multi-Cup Coordinated Lifts — Pack of 4

The pack-of-4 configuration is designed for coordinated multi-cup lifts where two or more technicians each use one or two cups to handle a single large or heavy curved glass or stone panel. This approach distributes the load across multiple vacuum points, improving stability and control during installation. The pack also ensures replacement cups are on hand when a pad requires service.

Compatible Materials

• Curved plate glass and float glass (min. 13" radius)
• Bent and cylindrical tempered glass
• Curved laminated safety glass
• Curved polished granite, marble, and natural stone
• Curved engineered stone and quartz composite
• Bent and formed smooth metal sheet (painted, coated, or polished)
• Curved aluminum composite material (ACM) — smooth face
• Curved prefabricated architectural panels — smooth, nonporous face
• Smooth nonporous curved or irregular surfaces with min. 13" (330 mm) radius and min. 1/4" (6.35 mm) material thickness

Not compatible with: flat surfaces (curved and irregular surfaces only); rough, textured, or porous surfaces; surfaces with radius tighter than 13" (330 mm); materials thinner than 1/4" (6.35 mm); thin or fragile materials that could fracture under vacuum stress; concrete, brick, unpolished stone, wood, or drywall.

Product Documents

• N6000 Instructions (PDF)
• N6000 Troubleshooting Guide (PDF)

Application Instructions

Step 1: Surface and Material Assessment

1. Confirm the surface is smooth and nonporous — do not proceed on rough, textured, or porous surfaces.
2. Confirm the surface is curved or irregular — the N6000 is designed for curved and irregular surfaces; for flat surfaces, select a flat-surface-rated cup.
3. Measure or estimate the surface radius — must be 13" (330 mm) or greater.
4. Confirm material thickness is at least 1/4" (6.35 mm) and that the material is not thin or fragile.
5. Verify the panel weight does not exceed 175 lbs (79 kg) per cup, or plan a multi-cup lift for heavier panels.

Step 2: Pad Inspection and Preparation

1. Inspect the G0750 suction pad for cuts, cracks, hardening, or contamination. Replace if damaged.
2. Clean the pad contact area on the work surface — remove dust, oil, moisture, and debris.
3. Ensure the pad is at operating temperature (above 10°F / -12°C) before use.

Step 3: Attaching the Cup to a Curved Surface

1. Center the pad on the target surface area, ensuring the full pad perimeter contacts the surface.
2. On curved surfaces, the pad will require more pumping strokes than on flat surfaces to achieve full vacuum — pump until firm resistance is felt.
3. Check the red-line vacuum indicator — confirm it shows a stable, full vacuum before lifting.
4. Apply a controlled test load (firm downward pull) to verify seal integrity before committing to the full lift.

Step 4: Lifting, Positioning, and Release

1. Lift smoothly — avoid sudden jerking motions that can break the vacuum seal.
2. Monitor the red-line indicator continuously throughout the lift and during positioning.
3. For multi-cup lifts, coordinate with all operators to lift and lower simultaneously.
4. Lower the load fully to a stable surface before releasing the vacuum.
5. Engage the release mechanism slowly and in a controlled manner.
6. Clean the pad after use and store in the supplied protective carrying case.

Technical Specifications

Safety Data Summary

Hazard Information

• Not for use with thin, fragile materials — vacuum stress can cause fracture even at the 1/4" minimum thickness if the material is inherently fragile
• Vacuum loss during a lift can result in sudden load drop, causing serious injury or property damage
• Overloading beyond 175 lbs (79 kg) per cup may cause sudden cup release without warning
• Use on surfaces with radius tighter than 13" (330 mm) will prevent full pad seal and significantly increases drop risk
• The N6000 is not rated for flat surfaces — use on curved and irregular surfaces only
• Damaged or contaminated suction pads must be replaced before use
• Operating below 10°F (-12°C) may degrade rubber pad performance and vacuum retention
• Do not use above 5,000 ft (1,500 m) elevation

Personal Protective Equipment

• Safety glasses or face shield when handling glass panels
• Cut-resistant gloves rated for glass and stone handling
• Steel-toed safety footwear
• Hard hat when working in overhead or multi-level environments

Safe Handling

• Confirm surface radius is 13" (330 mm) or greater before attaching to curved surfaces
• Confirm material thickness is at least 1/4" and material is not fragile before use
• Inspect the pad and clean the contact area before each lift
• Never exceed the rated 175 lb load capacity per cup
• Monitor the red-line indicator continuously — lower the load immediately if vacuum loss is detected
• For multi-cup lifts, coordinate all operators before lifting and lower simultaneously
• Store in the supplied carrying case to protect the pad between uses

Frequently Asked Questions

Q: What is the difference between the N6000 and the N6450?
A: Both use the same 10" G0750 pad and share the same 175 lb capacity, 13" minimum radius, and 1/4" minimum material thickness rating. The N6000 has an all industrial-grade plastic handle and plunger (lightweight, rust-resistant) and is sold as a Pack of 4, while the N6450 has a metal handle and is sold individually. Choose the N6000 for lightweight construction, corrosion resistance, or when multiple cups are needed for coordinated lifts; choose the N6450 for maximum handle durability and grip rigidity in single-cup heavy-use applications. Pad replacement is interchangeable between the two models (both use G0750).

Q: Can the N6000 be used on flat surfaces?
A: No. The N6000 is rated for curved and irregular surfaces only. For flat surface applications at the same 175 lb capacity, there is no direct flat-surface equivalent in the standard WPG hand cup lineup at this capacity — the N5450 and N5000 provide 150 lb flat-surface capacity. For curved surfaces, the N6000 and N6450 are the highest-capacity options in the lineup.

Q: Are alternative pad compounds available for the N6000?
A: Yes. Alternative vacuum pad compounds are available for special applications — such as specific surface materials, chemical environments, or temperature conditions outside the standard rubber’s optimal range. Contact your Wood's Powr-Grip authorized distributor for available compound options and guidance on selecting the correct compound for your application.

Q: Is the G0750 pad interchangeable with the N6450?
A: Yes. Both the N6000 and N6450 use the G0750 standard rubber pad (10" diameter), making replacement pads interchangeable between the two models. This simplifies pad inventory management for operations that stock both cups.

Q: What replacement pad does the N6000 use?
A: The N6000 uses the G0750 standard rubber pad (10" diameter). Replacement pads and alternative compound pads are available through Wood's Powr-Grip authorized distributors.

Q: Is this product made to order?
A: Yes. This product is made to order and all sales are final. Please confirm your surface type, curvature radius, material thickness, and load requirements before placing your order.

California Residents: ⚠️ WARNING: Cancer and/or Reproductive Harm — www.p65Warnings.ca.gov