Dakota Sinks DSE-HC5050 Signature Elements Series 32 1/4 Inch 50/50 Handmade Copper Double Bowl Undermount Kitchen Sink - Hammered Copper

The tradition of hammering copper is a metalworking tactic used for generations to toughen copper sheets. A ball peen hammer is generally used to shape the indentations before the sheet is manipulated into its desired shape. Copper is additionally hammered for aesthetic purposes. Over time, pure copper can start to naturally oxidize in its environment, developing a copper patina. Patina is commonly a green or brown film on the surface of copper, bronze or different comparable metals. The extra depth and dimension created through hammering the surface of copper makes patina much less obvious as it starts to appear.


  • 50/50 Double Bowl Sink
  • 99.8% copper content
  • Extra Large Sound Cancellation Pads
  • Thermal Undercoating
  • Included Accessories - Bottom Grid(s) DSE-BGHC5050, Basket Strainer DSA-PBSSS and Kit
  • cUPC listed
  • Lifetime Limited Warranty


  • Number of Basins: 2
  • Material: Copper
  • Installation Type: Undermount
  • Gauge: 14


  • Width: 32 1/4 Inch
  • Front to Back: 18 1/8 Inch
  • Depth: 9 1/2 Inch
  • Minimum Cabinet Size: 36 Inch
Number Of Basins 2
Installation Type Undermount
Material Copper
Finish Copper Tones
Included Basket Strainer / Bottom Grid
Drain Placement Center
Sink Gauge 14
Sink Shape Rectangle
Collection Signature
Warranty Lifetime Limited
Certifications and Listings cUPC Certified
Width 32.25
Front to Back 18.13
Depth 9.5
Minimum Base Cabinet 36
Left Inner Basin Length (in.) 14.6
Left Inner Basin Width (in.) 9
Right Inner Basin Length (in.) 16.1
Right Inner Basin Width (in.) 9