Hyper Kitchen & Bathroom Silicone 300Ml (10.1 FL. OZ) Transparent - 12 COUNT
Designed for sanitary applications requiring non-corrosive, moldproof, and chemically resistant properties, Hyper Kitchen & Bath Silicone Sealant is a high quality moisture curing neutral silicone sealant. Connecting joints between a variety of substrates in wet areas can be sealed with this product.
Features & Benefits
- Flexible at extreme temperatures.
- Has +/-25% movement capability.
- Non Corrosive.
- Almost odorless.
- Ensures weather and waterproofness.
- Can endure cleaning agents.
- Excellent UV resistance.
- Non sag feature.
- Sealing of bathtubs, sinks and showers and other elements.
- Connection joints of floor and walls.
- Expansion joints.
- Glazing and supporting substrates.
Surface Recommendation: Kitchens, bathroom, glazing works
Volume: 310 ml
An acetoxy cure, high performance, mold-proof silicone sealant designed for gap filling and sealing in a wide range of sanitary applications.
100% silicone, does not contain any solvent,
Prevents mold formation on its surface,
Stays bright and clean thanks to its
outstanding mildew and & fungus
Low modulus, high elasticity,
Excellent resistance to direct sunlight,
rain, snow and ozone,
Primerless adhesion to numerous porous
and non-porous substrates,
Resistant to temperature extremes (-40°F
Does not crack or discolor
Withstands detergents, cleaning agents
Acetoxy curing system.
Sanitary joints: Sealing applications in kitchens and bathrooms.
Sealing of connection joints,
Weather seal application,
• Glazing works,
How to use:
Ensure that surfaces to be sealed are clean, dry and grease free.
The application temperature must be between +41°F and +104°F.
In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 0,2x0,2 in, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a backup material.
After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish.
Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically.
0,2in. joint depth is recommended for joint widths between 0,2in to 0,5in.
0,2in 0,4in 0,5in
Joint 0,2in Depth
Efficiency 26ft 16ft 13ft /10,1 oz