The Heavy Duty Concrete Cart is the perfect choice to mix and transport concrete and mortar to your work area. Professional contractor grade construction, this cart stands up to the wear and tear of the rugged jobsite.
Description:
The Heavy Duty Concrete Cart takes advantage of its all-welded construction with a tapered front panel to aid in material removal and dumping. The 1 1/4″ tubular handle, formed lip and reinforced corners provides the additional strength needed to stand up to the wear and tear of the rugged jobsite. Choose from two caster types. Brake option (Model #ACC-166) sold separately.
*Note: Always distribute load evenly. When uniform weight capacity is calculated for any product, the capacity is based on the weight being uniformly distributed over the entire usable area. For those products with casters or wheels, the maximum weight capacity is the lowest weight capacity of either the product or the set of casters/wheels.
Features:
- Heavy duty 12 gauge steel construction
- Choose 6.5 or 10.5 Cubic foot capacity
- Formed lip on all sides for reinforcement
- Tapered front panel
- Choose from various caster types
- Brake option sold separately (Model #ACC-166)
Common Uses:
- Transporting of concrete and mortar
- Mixing station for concrete or mortar
- Transporting concrete or mortar in commercial buildings
- Transporting of materials that require to be dumped
| Model | Capacity | Caster Type | Weight | Overall Dimensions L x W x H | Uniform Capacity |
| JCC-10PL-2R2S | 10.5 Cubic Feet | 8" High-Performance Elastomer Casters: 2 Rigid, 2 Swivel | 156 lbs. | 52" x 23.5" x 29.5" | 3,000 lbs. |
| JCC-10MR-2R2S | 10.5 Cubic Feet | 8" Mold-On-Rubber Casters: 2 Rigid, 2 Swivel | 172 lbs. | 52" x 23.5" x 29.5" | 3,000 lbs. |
| JCC-60PL-2R2S | 6.5 Cubic Feet | 8" High-Performance Elastomer Casters: 2 Rigid, 2 Swivel | 120 lbs. | 43" x 23.5" x 25.5" | 3,000 lbs. |
| JCC-60MR-2R2S | 6.5 Cubic Feet | 8" Mold-On-Rubber Casters: 2 Rigid, 2 Swivel | 136 lbs. | 43" x 23.5" x 25.5" | 3,000 lbs. |
- PSPaul S.Verified BuyerReviewingForklift Mortar TubsI recommend this productRated 3 out of 5 stars6 months agoAs-Is good for light construction, not quite heavy-duty
These have fairly solid construction and I like how one side is sloped for shovels, however these aren't quite made for heavy-duty commercial masonry construction.
The top flange is just a 90 degree bend with two separate sharp corners on each corner of the tub, which could be potential knee-killers while walking by on the scaffolding, dipping buckets during grout pours, etc.
Our shop added some angle steel at the top rim to make it more like square tubing and finished the tack-welds on the bottom legs all the way across to prepare them for getting bounced around empty on a forklift churning through mud and ruts, beat on the next day if there is no running water available for washing, all the non-ideal situations we tend to run into.
Attaching a picture of what we added to the corners, those original bent-over rims were SCARY