Kerosene Forced Air Heater - MH-0075-0M11

MH-0075-0M11

The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.

Motor
Heavy-duty, cast aluminum enclosed electric motor

Burner Head
One-piece cast aluminum

Components
Easy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires

Factory Tested for Multiple Fuels
Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel

Important Notes
-Not for use in residential living areas or inadequately ventilated areas
-Proper ventilation required during operation
-Must be plugged into an approved standard electrical outlet for operation

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Specifications

• Heat Output

  75,000 BTU

• Hot-Air Flow

  173 CFM

• Air Pump Pressure

  5.5 PSI

• AC Power

  120V, 60Hz, 1.3 Amps

• Motor Size

  1/5 HP

• Fuel Tank Capacity

  5.3 gallons

• Fuel Consumption

  0.55 gal./hr.

• Max. Operating Hours

  9.5 hours

• Heating Area

  1,875 sq. ft.

• Multi-Fuel Capable

  Yes

• Digital Temp. Read-Out

  Yes

• Error Indicator Read-Out

  Yes