Product Description
Hurricane BMX-600 Skid Steer Concrete Mixer Attachment
Scoop, mix, and pour with ease using the Eterra Hurricane BMX-600, the largest model in the Hurricane concrete mixer lineup. With 21.18 cu. ft. (158.5 gallons) of capacity, it's built for small and medium-size concrete jobs where a truck is unnecessary or can't access the site. It keeps your project moving without the risk of spillage.
The BMX-600 gives you three ways to dispense material. You can use the 8" hydraulically operated center outlet, controlled from your machine through a 12V solenoid, with an optional center chute so a second operator can direct the flow. You can use the side chute, where a second operator adjusts the discharge volume manually with a lever. Or you can pour straight out the front through the top grate.
The Hurricane is built to outlast the competition. A reversible chain drive transmission is durable, reliable, and low-maintenance. Replaceable Hardox 400 steel mixing paddles mix both dry and wet materials more efficiently than standard augers, and the heavy-duty A572 Grade 50 steel construction is built for long-term performance. An easy-to-lift bolted grate makes cleaning quick, and an integrated bag splitter makes loading concrete effortless.
Key Features
- 21.18 cu. ft. capacity: 158.5 gallons, the largest Hurricane mixer
- Three dispensing options: an 8" hydraulic center outlet, a manual lever side chute, or a front pour through the top grate
- Hydraulic center outlet: an 8" diameter chute controlled by a 12V switched solenoid from your machine's controls
- Optional center chute: lets a second operator direct the flow from the center outlet
- Reversible chain drive: a durable, reliable, low-maintenance transmission
- Hardox 400 mixing paddles: replaceable paddles that mix dry and wet materials more efficiently than standard augers
- Integrated bag splitter: for effortless concrete loading
- Bolted, easy-lift grate: for quick cleaning
- A572 Grade 50 steel: heavy-duty construction for long-term performance
- Flat face couplers included: standard flat face couplers come with the unit
Specifications
| Model | BMX-600 |
| Capacity | 21.18 cu. ft. / 158.5 gallons |
| Center Discharge Chute | Hydraulically controlled, 8" diameter |
| Side Discharge Chute | Manual lever |
| Drive System | Chain driven (reversible) |
| Electrical | 12V switched solenoid |
| Flow Range | 11–22 GPM |
| Max Pressure | 3,500 PSI |
| Paddle Material | Hardox 400 |
| Weight (Empty) | 1,389 lbs |
| Weight (Full Load) | 4,564 lbs |
| Width | 81" |
| Construction | A572 Grade 50 steel |
Use & Care Tips
- Mix with the engine at about 50% of maximum speed, and don't overload the bucket. Leave at least 2" of the external blades free of material for proper mixing.
- Never reverse the rotation direction abruptly. Return the control to neutral for a few seconds first to protect the motor and seals.
- Carry loads as low as possible to minimize tipping risk, and slow down when turning or moving onto or off slopes.
- Don't mix asphalt or material larger than 1.25" in diameter, and never use the mixer to dig, grind, tow, pull, or tear.
- The bearings are sealed and permanently greased; grease the main seal zerks only enough to maintain sealing pressure. Over-greasing can push grease into the mixing chamber and damage your batch.
- Wash the mixer after each use, paying special attention to the mixing shaft bearings and the hydraulic and electrical connections. Coating the inside of the bucket with diesel or fuel oil helps keep material from sticking.
Frequently Asked Questions
Q: How much concrete does the BMX-600 hold?
A: 21.18 cubic feet, or 158.5 gallons. It's the largest of the Hurricane mixers.
Q: How heavy is it when full?
A: It weighs 1,389 lbs empty and 4,564 lbs with a full load. Make sure your skid steer's rated operating capacity can safely handle the full-load weight.
Q: What hydraulic flow does it need?
A: 11–22 GPM, with a maximum pressure of 3,500 PSI.
Q: How do I dispense the concrete?
A: You have three options: the 8" hydraulic center outlet controlled from your machine, the side chute with a manual lever for a second operator, or pouring directly out the front through the top grate. An optional center chute lets a second operator direct the flow from the center outlet.
Q: How is the center outlet controlled?
A: By a 12V switched solenoid, operated through your machine's controls. On machines with four hydraulic lines, you can run the mixing rotation and open or close the discharge at the same time. On machines with two hydraulic lines, these functions are controlled one at a time.
Q: Can it mix dry materials too?
A: Yes. The Hardox 400 paddles mix both dry and wet materials more efficiently than standard augers.
Q: Are the mixing paddles replaceable?
A: Yes. The Hardox 400 steel paddles are replaceable.
Q: Is there anything I shouldn't mix?
A: Don't mix asphalt or any material larger than 1.25" in diameter. The mixer is also not for grinding, digging, towing, pulling, or tearing.
Q: Does it come with hydraulic couplers?
A: Yes. Standard flat face couplers are included. Non-standard couplers aren't supplied and should be sourced locally to match your machine.
Q: How do I keep it clean?
A: Wash it after each use. The bolted top grate lifts easily for quick cleaning. Coating the inside with diesel or fuel oil before use helps keep material from sticking to the walls.
Q: Is it available in other sizes?
A: Yes. The skid steer Hurricane also comes in 9 cu. ft. and 16 cu. ft. sizes, and Eterra makes a Hurricane for mini skid steers.
Q: Where can I find the spec sheet and manual?
A: Download the Hurricane spec sheet (PDF) or download the Hurricane operator's manual (PDF).




