PRO12 MQ Essick PRO12 Series Stationary Mixer
PRO12 MQ Essick PRO12 Series Stationary Mixer is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Safe & Secure Payments.
PRO12 MQ Essick PRO12 Series Stationary Mixer
For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.
- Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
- Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
- Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
- Adjustable height - discharge height 24" ~ 42.5".
- Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
- Extended run times - up to 8 hours - with 5-gallon fuel tank.
- Costly waste is reduced by a spill plate that directs excess material into the tub.
- Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
- Convenient access forklift pockets from any side of the mixer.
- Drive and dump controls easily accessible and located above the engine cowling.
- Greasable paddle shaft seal provides long service life.
Capacity | 12 ft³ | 340 L |
Bags | 3-4 | |
Max. Aggregate Size | 1 in | 25.4 mm |
Adjustable Drum Discharge Height | Up to 42.5 inches | |
Drive System | Hydraulic | |
Dump Action | Hydraulic |
Overall Length | 73.5 in | 1917.7 mm |
Overall Width | 35.0 in | 889 mm |
Overall Height | 45.0 in | 1143 mm |
Operating Weight | 1580 lb | 716.68 kg |
Engine Make/Model | Honda / GX390 | |
Start Method | Recoil | |
Engine Power | 11.7 HP | 8.7 kW |
Fuel Type | Gasoline |