Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Titebond PROvantage Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use.

It provides a permanent bond that remains flexible, reduces nailing and prevents squeaky floors. It offers a strong initial tack and excellent bond strength. It is covered under the 25 Year Silver Subfloor Warranty against subfloor squeaks and pops.

Features & Benefits

  • Recommended For: Subfloor Installations, General Plywood Use, As Well As Filling Gaps And Irregularities In The Subfloor.
  • Industry’s Best Subfloor Warranty
  • Bridges Gaps
  • Strong, Fast Grab
  • Wet & Frozen Lumber
  • Prevents Squeaks
  • Compatible Materials: Common Building Materials, Including Wood, Engineered Lumber, Particleboard, Osb And Wet, Frozen And Treated Lumber.
  • Voc-Compliant Solvent
  • Reduces Nailing
  • Exceptional Durability
  • Extrudes 0º – 100ºF

Application Guidelines

  • Application Temperature: 0°F to 100°F
  • Service Temperature Range: -20°F to 120°F
  • Working Time: Approximately 20 minutes for a 1/4” bead
  • Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
  • Application: Cut tip straight across for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
  • Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
  • Limitations: Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.

Physical Properties

  • Type: Proprietary synthetic polymer
  • State: Thixotropic medium-viscosity mastic
  • Color: Light beige
  • Solids: 64%
  • Viscosity: 125,000 cps
  • VOC: < 50 g/L
  • Flashpoint: < 0ºF
  • Freeze / Thaw Stability: Will not freeze
  • Storage Life: 18 months in tightly closed containers at 75ºF
  • Odor: Solvent (strong)

Coverage

Size

⅛” Bead

¼” Bead

⅜” Bead

½” Bead

28 Oz. Cartridge

355 ft.

86 ft.

39 ft.

21 ft.

Specifications & Certifications
  • Exceeds APA AFG-01, ASTM D3498 and ASTM C557.