Rhino Gloss Booster water based solution for sealing and enhancing marble, terrazzo, ceramic, wood, and linoleum
Gallon Size Sealer
Rhino Gloss Booster is a water based acrylic solution designed to protect and enhance polished surfaces such as Marble, Terrazzo, Ceramic Tile, Wood and Linoleum.
Directions:
This product is concentrated. Dilute 5-10 oz. of Rhino Gloss Booster to one gallon of water, increase or reduce mix depending on your floor needs. Apply solution on the floor using a dump map. Rhino Gloss Booster may be buffed with 175-2000 rpm floor machine. On marble and terrazzo use steel wood #2 pad. On Ceramic Tile, Wood and Linoleum use white nylon pad.
Coverage:
2500-4000 per gallon once diluted.
MATERIAL SAFETY DATA SHEET
I. PRODUCT INFORMATION
II. HAZARDOUS INGREDIENTS / IDENTITY INFORMATION
1 Hazardous Components None 2 OSHA PEL None 3 ACGIH TLV None 4 Other limits recommended None 5!% OpXonal None
III. PHYSICAL AND CHEMICAL PROPERTIES AND CARACTERISTICS
IV. FIRE AND EXPLOSION HAZARD DATA
!
WHILE BRILLIANT MARBLE CORPORATION BELIEVES THE DATA SET FORTH HEREIN ARE ACCURATE AS OF THE DATA HEREOF. BM CORPORATION MAKES NO WARRANTY WITH RESPECT THERETO AND EXPRESSLY DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON.
SUCH DATA ARE OFFERED SOLELY FOR YOUR CONSIDERATION. INVESTIGATION AND VERIFICATION.
MANUFACTURER: ADDRESS:
ISSUE DATE: EMERGENCY NUMBER: PHONE:
BRILLIANT MARBLE PRODUCT NAME: RHINO GLOSS BOOSTER 2000 S. DIXIE HWY #100 MIAMI - FL 33133
04-09-2015
1-800-4242-9300
1-305-858-7979 1-800-934-8396
1. BOILING POINT
2. VAPOR PRESSURE (mm Hg): 3. VAPOR DENSITY (AIR=1):
4. SPECIFIC GRAVITY (H20=1) 5. MELTING POINT
6. SOLUBILITY IN WATER:
5. APPEARANCE AND ODOR:
150 C N/A N/A
1.05
N/A
Soluble
Liquid Color: Clear - Odor CharacterisXc
1. FLASH POINT: Not Flammable 2. FLAMMABILITY LIMITS: N/A
3. LEL: N/A
4. UEL N/A
5. SPECIAL FIRE FIGHTING PROCEDURES: N/A
- JLJustin L.Verified BuyerReviewingDry Treat Intensifia (Stainproof Color Enhancer Sealer)I recommend this productRated 5 out of 5 stars5 months agoGood choice for colored concrete counter
Many sealer categories and brands out there but I'm glad I picked this one for my concrete counters. I used a counter-specfic concrete mix and later applied a portland slurry to fill in air holes and other defects. I had added quikrete liquid color to all mixes, but after complete curing and sanding/polishing it was typical concrete grey so I counted on this sealer to bring out the color and it did, like magic. Instructions were good. 1st application absorbed well, not much excess to wipe off. 2nd absorbed less, more excess to remove. I added a 3rd just to be sure and I don't think it was necessary. I think I wiped it all off. Satisfying process. 1qt was plenty for 50sf of counter. I still have some left.