OCM SPEED LOCK TIES are used to build wood forming using standard ¾” plyform with 2x4’s for the walers and stiff backs (strong backs).

Features

  • The ties feature a self-centering cone that will adapt to imperfect alignment and dimensional variances in the lumber without affecting the break back operation.
  • Available in standard sizes and made to order special sizes.
  • 2250# safe working load (2:1 safety factor) adjust tie pattern/pour rate according to specific job requirements.
  • 13/16th Hole required.
  • Uses less lumber and requires less nailing than other typical wood-based hand-set systems.
  • Adaptable to most other types of wall forming systems.
  • Great for radius forming.
OCM Part No. Wall Size Weight per each lbs Safe Working Load lbs
SLT-06B 6" 0.21 2,250
SLT-07B 7" 0.22 2,250
SLT-08B 8" 0.23 2,250
SLT-09B 9" 0.24 2,250
SLT-10B 10" 0.25 2,250
SLT-11B 11" 0.26 2,250
SLT-12B 12" 0.28 2,250
SLT-13B 13" 0.29 2,250
SLT-14B 14" 0.31 2,250
SLT-15B 15" 0.33 2,250
SLT-16B 16" 0.34 2,250
SLT-18B 18" 0.36 2,250
SLT-20B 20" 0.38 2,250
SLT-21B 21" 0.39 2,250
SLT-22B 22" 0.41 2,250
SLT-24B 24" 0.44 2,250
SLT-25B 25" 0.43 2,250
SLT-26B 26" 0.44 2,250
SLT-27B 27" 0.45 2,250
SLT-28B 28" 0.46 2,250
SLT-29B 29" 0.47 2,250
SLT-30B 30" 0.48 2,250
SLT-36B 36" 0.53 2,250
SLT-38B 38" 0.54 2,250
SLT-40B 40" 0.55 2,250
SLT-42B 42" 0.62 2,250
SLT-44B 44" 0.64 2,250
SLT-48B 48" 0.72 2,250
SLT-51B 51" 0.73 2,250
SLT-54B 54" 0.75 2,250
SLT-57B 57" 0.77 2,250
SLT-59B 59" 0.79 2,250
SLT-60B 60" 0.80 2,250
Comments: SWL provides a safety factor of approximately 2 to 1. Special lengths and Stainless Steel also available.