Super Por-Rok® Premium Cement Based Anchoring Cement

SpecRock is a pourable non-shrink Portland cement-based anchoring cement that sets hard in 12–15 minutes

SpecRock is a one-component, waterproof, non-shrink, Portland cement-based anchoring cement that expands as it sets to lock into the surrounding concrete. SpecRock ES (extended set) offers a 60–75 minute work time for placement in hot weather conditions above 90°F.

Features

• Sets hard in 12–15 minutes for fast production
• Rapid high strength — up to 2,000 psi in 1 hour at 72°F
• Controlled expansion locks into surrounding concrete as it sets
• Non-metallic — maintains volume stability over time
• Waterproof and resistant to freeze/thaw cycles
• Flowable and pourable for easy application
• Approved for exterior use and direct water exposure
• SpecRock ES offers 60–75 minute extended work time for hot weather applications above 90°F

Specifications

Applications

Super POR-Rok is used for both structural anchoring and concrete repair.

Common Uses:

• Anchor bolts and threaded rods
• Railings and guard rails
• Banisters and handrails
• Sign posts
• Machinery bases
• Structural steel connections
• Concrete crack repair
• General patching and void filling

Mixing & Installation

Mixing Ratio

• Approximately 15% water by weight
• ~2.3 oz water per 1 lb of product

Mixing Instructions

1. Add clean potable water into mixing container
2. Slowly add powder while mixing
3. Mix to smooth, flowable consistency
4. Avoid overwatering (reduces strength)

Placement

• Pour directly into prepared hole or void
• Ensure full encapsulation of anchor bolt or rod
• Finish slightly above surface to prevent water pooling

Surface Preparation

Proper preparation is critical for performance:

• Concrete must be fully cured (minimum 28 days)
• Remove all dust, debris, oil, or laitance
• Pre-dampen hole (SSD condition – saturated surface dry)
• Do not leave standing water in anchor hole
• Use proper washer sizing for bolt load distribution

Technical Data Sheet (TDS Summary)

Physical Properties

• Type: Hydraulic cement-based anchoring compound
• Color: Gray powder
• Expansion: Controlled, non-shrink
• Density: Approx. 110 lbs/ft³ (hardened)

Set Time

• Initial set: ~20–30 minutes
• Final set: rapid strength gain within hours

Compressive Strength

• 4 hours: ~2,000 PSI
• 1 day: ~4,000 PSI
• 28 days: ~5,500–6,000 PSI (varies by mix conditions)

Performance Characteristics

• High early strength development
• Minimal shrinkage
• Good bond to concrete and steel
• Suitable for load-bearing anchoring applications

Safety Data Sheet (SDS Summary)

Hazard Classification

Super POR-Rok contains cementitious materials that may cause:

• Skin irritation or burns
• Serious eye irritation
• Respiratory irritation from dust exposure
• Potential long-term lung effects from repeated dust inhalation (silica content)

Required PPE

Eye Protection

• Safety goggles required during mixing and placement

Skin Protection

• Chemical-resistant gloves
• Long sleeves recommended

Respiratory Protection

• NIOSH-approved dust respirator during mixing
• Avoid inhaling dust particles

Safe Handling Guidelines

• Do not breathe dust
• Avoid contact with wet cement
• Wash thoroughly after handling
• Do not eat or drink during use
• Store in dry, sealed containers

Storage & Shelf Life

• Shelf life: 12 months when properly stored
• Store in a cool, dry environment
• Keep container tightly sealed
• Avoid exposure to moisture and humidity

Industries Served

• Commercial Construction
• Structural Steel Contractors
• Municipal Infrastructure
• Utility Contractors
• Industrial Maintenance
• Equipment Installation
• Concrete Repair Contractors
• Transportation Projects

Why Contractors Use Super POR-Rok

• Faster turnaround than standard grout
• High early strength for load-bearing anchors
• Easy on-site mixing (no additives needed)
• Reliable expansion for tight anchoring grip
• Works in interior and exterior environments

Supporting Documents

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)