Glaxs Original 2+1 Transparent 215 ml works with a Tenax Cartridge Gun and Cartridges. All colors available.

GLAXS Original Transparent glue is made of two previously dosed components. The GLAXS Original Transparent is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper guns with 2 pistons, the product is ready for use.

Suitable to glue and to mend:

• Stone
• Marble
• Granite
• Ceramic

GLAXS Original Transparent can also be used used to glue together different materials such as:

• Marble-Marble
• Marble-Granite
• Stone-Ceramic

Suitable for indoor and outdoor use.

INSTRUCTIONS FOR USE:

1. All the surfaces to be treated must be cleaned and free of dust and grease.
2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
3. Remove the threaded extremity and uncap the cartridge.
4. Fix the mixer to the cartridge through the threaded nozzle.
5. Before applying the glue on the surfaces, do spurge around 5 cm in line.
6. Use only guns approved by TENAX, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

SHELF LIFE:

The products in cartridge will last at least 18 months in the pack and 12 months out of pack, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

• Gel Time Approximately: 10-12 minutes
• Tacky Free Time: 45-50
• Minimum Reaction Temp: +1°C
• Temperature Range for Use After Hardening: -25°C - +60°C
• Ratio: 2:1