Achilli MSA 45 Degree Miter Cutting Bridge Saw 130" (3300MM) Cut for Granite, Marble, Engineered Stone, Quartz, Quartzite Stone Slabs and Counter Tops. 7.5 HP variable speed motor 700-3400 rpm. Hot Dipped Galvanized Frame
The Achilli MSA 45 Degree Miter Saw is specifically designed to make 45-degree miter cuts for granite, marble, engineered stone, quartz, quartzite stone counter tops, etc.
Strong motor, water recycling system, variable speed control makes this granite miter saw a must have.
This Stone 45 Degree Miter Saw frees up the bridge Saw from 45-degree stone cuts.
Extremely accurate 45-degree stone cutting.
The Achilli Frame comes with as a hot dipped galvanized frame for years and years of life with no rusting or metal fatigue.
• Galvanized Steel frame
• Head travel on linear guides fitted with recirculating ball slides.
• Motorized head travel on X-axis with variable speed.
• 10 pneumatic pistons to secure the workpiece in place during cutting.
• Worktable made of polyene for easy washing off and easy sliding the material onto the saw. Optional roller table available.
• BLADE VARIABLE SPEED FOR 5.5 KW (7,5 HP) MOTOR: The machine comes with a frequency inverter for the main motor, allowing the operator to set the correct peripheral speed (700-2500rpm) of the diamond blade, according to the blade diameter and the hardness of the stone to be cut.
• High precision head motion on linear guides with recirculating ball slides.
• Material thickness 10mm-80mm
• Blade angle adjustment (in/out) 45 +/- 2 degrees
HEAD MOTION:
Head travel (X axis): 129" (3300 mm) - feed speed from 0 to 7 meters/minute.
Max. workable thickness 1mm - 3" (80mm)
CONTROLS - MAIN ELECTRICAL PANEL:
Emergency stop push button
Power-on "RESET" button
TECHNICAL SPECIFICATIONS:
Useful cut: 130" (3300mm)
Overall Dimensions: 171" x 59 x 58"
Worktable Dimensions: 130" X 39" (3300x1000mm)
Diamond Blade Diameter: 14",16",18" (350-400-450mm)
Blade Bore Size: 2" (50mm)
Min-Max stone thickness: 0.4"- 3.15" (10-80mm)
Main Motor Power: 5.5Kw 7.5HP 3 phase
Main Motor Rotation Speed: 1400 rpm 50Hz - 1700 rpm 60Hz
Main Motor Variable Speed: 700-3400 rpm
Standard Voltage: 230V-60Hz. 30 AMP Breaker required
Dimensions of installed machine 14'2" x 74"x 69"
Weight of Saw: 2039 lbs (925kg)
Minimum width to miter:
The minimum width of the piece you can work depends mainly from the thickness of the piece.
To calculate the minimum width you can work is always = the thickness of your piece + 14mm (necessary to block the piece under the slab stop)
14mm is a standard with our slab stops, so for example: If your piece is 20mm thick, the minimum width you can cut is = 20mm + 14mm = 34mm
OPTIONS FOR THE MSA MITER BRIDGE SAW:
1. Water Collection and Recycling System: Water Tray that sits under the saw to collect the water for recirculation. Comes with Water Pump that pumps the water from the water tray back to the blade. $1370.00
2. Side Extension Table with Rollers: 60" x 35" Side Extension Table equipped with rollers to facilitate slab movement $952.00