SpecPoxy 2000 LPL is a long pot life, medium-viscosity epoxy bonding adhesive with extended workability for structural bonding
SpecPoxy 2000 LPL is a two-component, moisture-tolerant, solvent-free bonder meeting ASTM C881 (Types I, II, IV, & V, Grade 2, Classes B&C). Its long open time makes it suitable for bonding overlays and gravity filling concrete cracks.
Key Features & Benefits
- Long open time for extended workability
- Suitable for both fresh and hardened concrete
- Effective for gravity filling of concrete cracks
- 0 g/L VOC content
Application Instructions
-
- Bonds fresh concrete to hardened concrete.
- Anchors steel to fresh concrete.
- Used for gravity filling cracks in concrete.
- VOC content is 0 grams per liter, emphasizing its environmental safety.
Mixing Instructions
- Premix each component separately, then mix two parts of Part A with one part of Part B for three minutes using a low-speed drill.
- Ensure all materials are at least 40°F prior to mixing and installation.
Surface Preparation
- Surfaces must be clean and structurally sound, free from oil, grease, dirt, and other contaminants.
- Recommended methods include abrasive blast cleaning and mechanical removal.
- Ensure drilled holes are cleaned out with a cylindrical bristle brush and oil-free compressed air.
Application Techniques
- Bonding: Apply at a rate of 80 sq ft per gallon, approximately 20 mils in thickness.
- Patching: To create a mortar, mix one part SpecPoxy 2000 LPL with one to four parts clean, dry silica sand. First, apply a prime coat of the neat mixed epoxy before the mortar.
Technical Data Summary
- ASTM Compliance: ASTM C881, Types I, II, IV, & V, Grade 2, Classes B&C
- Shelf Life: 2 years from manufacture date, stored in a clean, dry area
Packaging
Available in 1-gallon units (also offered in 3-gallon and 15-gallon units).