Specpoxy 2000 Lpl Astm 881 Compliant Hi-Mod, Lpl, Medium Viscosity Epoxy

SpecPoxy 2000 LPL is a long pot life, medium-viscosity epoxy bonding adhesive with extended workability for structural bonding

SpecPoxy 2000 LPL is a two-component, moisture-tolerant, solvent-free bonder meeting ASTM C881 (Types I, II, IV, & V, Grade 2, Classes B&C). Its long open time makes it suitable for bonding overlays and gravity filling concrete cracks.

Key Features & Benefits

• Long open time for extended workability
• Suitable for both fresh and hardened concrete
• Effective for gravity filling of concrete cracks
• 0 g/L VOC content

Application Instructions

• • Bonds fresh concrete to hardened concrete.
  • Anchors steel to fresh concrete.
  • Used for gravity filling cracks in concrete.
  • VOC content is 0 grams per liter, emphasizing its environmental safety.

  Mixing Instructions

  • Premix each component separately, then mix two parts of Part A with one part of Part B for three minutes using a low-speed drill.
  • Ensure all materials are at least 40°F prior to mixing and installation.

  Surface Preparation

  • Surfaces must be clean and structurally sound, free from oil, grease, dirt, and other contaminants.
  • Recommended methods include abrasive blast cleaning and mechanical removal.
  • Ensure drilled holes are cleaned out with a cylindrical bristle brush and oil-free compressed air.

  Application Techniques

  • Bonding: Apply at a rate of 80 sq ft per gallon, approximately 20 mils in thickness.
  • Patching: To create a mortar, mix one part SpecPoxy 2000 LPL with one to four parts clean, dry silica sand. First, apply a prime coat of the neat mixed epoxy before the mortar.

Technical Data Summary

• ASTM Compliance: ASTM C881, Types I, II, IV, & V, Grade 2, Classes B&C
• Shelf Life: 2 years from manufacture date, stored in a clean, dry area

Packaging

Available in 1-gallon units (also offered in 3-gallon and 15-gallon units).

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)