Crystal Shine High-Gloss Lacquer-Based Sealer

• Provides a crystal-clear, glossy finish for new or old concrete
• Seals concrete surfaces for enhanced durability and easier cleaning
• Dustproofs concrete with a tough, durable film
• Non-yellowing under UV exposure
• Excellent blush resistance in damp areas

Application

Application Instructions

Surface Preparation

• Ensure the concrete surface is clean and free of standing water.
• Remove any existing sealer or material that may prevent adhesion.
• For existing concrete, thorough cleaning and drying are essential. Pressure washing with an alkaline detergent is recommended.

Application to Fresh Concrete

• Apply uniformly by spray at 250-350 sq ft/gal.
• Use a hand-held pump-up sprayer or an airless industrial sprayer for best results.
• For roller application, use a short-napped solvent-resistant sleeve and avoid entrapping air.

Sealing Existing Concrete

• Apply multiple thin coats at 300-400 sq ft/gal for a harder, more durable finish.
• Allow 12 hours before applying a second coat.
• Dry time is influenced by temperature and humidity.

Packaging

Packaging

• 55-gallon drums (208.2 L)
• 5-gallon pails (18 L)
  

Shelf Life

• Two years from the date of manufacture in original, tightly closed containers.
• Prevent contamination by avoiding the accumulation of water, dirt, or other materials.

Standards

Specifications & Compliance

• Complies with Federal AIM rule VOC requirements
• VOC content <100 g/L
• Meets VOC standards in OTC, LADCO, MRPO, and SCAQMD regions