Specpoxy 3000 Astm 881 Compliant Hi-Mod, Gel Viscosity Epoxy

SpecPoxy 3000 is a high-strength, solvent-free epoxy bonding gel for vertical and overhead bonding, crack sealing, and anchoring

SpecPoxy 3000 is a two-component, moisture-insensitive, high-modulus structural epoxy gel with 0 g/L VOC content. Its gel viscosity and extended working time make it suitable for anchoring bolts, dowels, and reinforcing steel in concrete, block, brick, or stone.

Key Features & Benefits

• 100% solids, solvent-free, low-odor, high-strength, non-sag gel
• Extended working time for careful application
• Pick-proof — suitable for security-sensitive environments
• ASTM C881 compliant, high-modulus, gel-viscosity epoxy
• 0 g/L VOC content

Application

• Anchoring bolts, dowels, and reinforcing steel.
• Vertical and overhead structural bonding and patching.
• Sealing cracks and setting injection ports.
• Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

• Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
• Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

• Surfaces must be clean and structurally sound.
• Remove contaminants by sandblasting, mechanical abrasion, or hydroblasting.
• Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

• Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
• Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.

Packaging

Available in 22 oz dual cartridges (also offered in 1, 2, and 10-gallon units).

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)